Effects Pedals

Bass Overdrive / Pedal

Chorus / Pedal Design Foot Pedal / Operation analogue / Effects Chorus

Amp Modeler / Pedal Design Foot Pedal / Operation digital / Effects Amp-Modeling

Amp Modeler / Pedal Design Foot Pedal / Operation digital / Effects Amp-Modeling

The Palmer PW9V is a standard 9 volt power supply which can be used to power a range of electric guitar and bass effects pedals. With a maximum power consumption of 500 mA and lengthy cable of 1.50 metres the PW9V is the perfect addition to your set up as it allows you to save money on 9 volt batteries.

Compact momentary footswitch/sustain pedal compatible with Korg keyboards and other Korg devices. It can be successfully used as both sustain pedal and footswitch compatible with assignable footswitch jacks. Pedal provides 1/4" TS plug that is easy to connect and has tough, moulded plastic body with the non-slipper rubber base that keeps the pedal in place. Dimensions: 80 x 92 x 30 mm. Weight: 120 g.
Made in: China
Compatible with: Universal
Polarity Switch: No
Type: Sustain Pedal;Damper
Type-A Connector: Jack MONO 6,3 mm Male
Colour: Black
Original Colour by Producer: Black;Black
Cable Length: 1,5 m

Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards.
Made in: Germany

The Electro Harmonix 9LDC-500 Power Supply grants you an easy tidy setup. Delivering 9 volts DC this power supply is suitable for the 2880 HOG Holiest Grail and 16-Second Delay pedals and will ensure theyre given the ultimate fuel they need to perform at their best. Play without the burden of electrical noise tainting your set use time and again thanks to immense durability and equip yourself with the kind of quality that only Electro Harmonix can provide. Whats more the 9LDC-500 also offers brilliant heat reduction and voltage damage protection meaning you can rely on it to deliver every time.

Universal expression pedal. Compatible with most expression pedal sockets. Rubber feet for solid floor-grip. Rubber contact surface. Sensitivity pot. Polarity switch. 183 cm cable with 6,3 mm jack plug. Weight: 318 g. Colour: Black
Made in: China

The DAddario XPND Pedal Riser is a blessing for the pedal enthusiast. Sometimes your favourite stompbox is at an awkward position or angle on stage making it hard to engage when its needed most. But with DAddarios handy pedal riser youll be troubled no more. Built from ultra-durable aluminium its simple to install and will raise your pedal to a prime easily accessible position.Even better you can fit a number of these across your XPND pedalboard if youre a real effects nut and with built-in cable routing itll help keep your stage manageable. This smaller size is ideal for a single pedal.

Instrument Equipment Bag

The Roland DP-2 Damper Pedal is a rugged all-metal sustain pedal thats ideal for use with Roland keyboards. Not only can the DP-2 be used for footswitch operations you can also use it to punch in/out on Roland/BOSS recording gear making tracking your performances a breeze. With an extra-long 10ft 1/4-inch Jack cable you can connect to a myriad of devices instantly without any additional cables or equipment necessary. Designed to be compact and portable the small footprint ensures that you wont need to take up lots of floor space on your stage or recording studio. Expand the functionality of your Roland/BOSS equipment with the DP-2.

Professional piano-style universal sustain pedal or footswitch controller that is the perfect product for keyboard players who want the most realistic pedal action. This classic-style, high-quality switchable damper pedal is used in the same manner as the sustain pedal on an acoustic piano and works with any M-Audio keyboard. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially designed rubber bottom that grips the floor and stays put while you play. A 1.8m long cable with 1/4'' connector is included.
Polarity Switch: Yes
Type: Sustain Pedal
Cable Length: 1,8 m
Original Colour by Producer: Black;Black
Colour: Black
Type-A Connector: Jack MONO 6,3 mm Male
Compatible …

Universal piano style sustain pedal. The Alesis ASP-2 is the perfect product for keyboard players who want the most realistic pedal action. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially-designed rubber bottom that grips the floor and won't move while you play. This classic-style pedal works with any Alesis digital piano, keyboard or MIDI controller and it also has a polarity switch for compatibility with virtually all other branded keyboards. Features: Classic and durable design with authentic piano style feel; Hardwired 6' (1.82m) cable with 1/4'' (6.35mm) connector; Polarity switch for compatibility with all electronic keyboards
Compatible with: …

Wall Adapter Power Supply. 9V DC power supply, 2000 mA, Polarity: (-) center, (+) ring, Euro plug
UK/EU Power supply included: No
Polarity: Center Minus
Current (mA): 2000.0
ChargerType: Power Supply
Made in: China
Plug Type: Barrel
Voltage: 9V
Power Supply: 240V
Current: 2000 mA

The Decksaver BOSS STOMP BOX Cover is a high-quality cover designed to accommodate your stompbox protecting it while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.

Custom moulded in the UK to fit the contours of the Eventide 3 Switch. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Eventide 3 Switch.
Compatible with: Eventide 3 Switch
Type: Dust Cover
Made in: United Kingdom

The Decksaver Eventide H9 & H9 MAX Cover is a high-quality cover designed to accommodate most two-button switch guitar pedals by Eventide protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include …

Power to the pedals. The Mooer Stage 9V Pedal power Supply offers you the means to fill your pedal with exactly what it needs – electricity. Coming with an EU plug it is perfect if you plan to take your gear to the continent or of course if you live there already. Whether you want to power a single pedal or daisy chain multiple pedals this power supply will happily deliver. With Mooers exceptional craftsmanship at its back it is perfect for the stage offering solid reliability and durability. You can count on it to deliver.

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
UK/EU Power supply included: No
Made in: China
Type: Tremolo
Power Supply: Adapter
Battery Operation: Yes

Love your FX 300? Then keep it safe with the LD Systems Padded Bag. From transport to breakdown your effects pedal is fully protected against knocks scratches and scrapes. Thats great news for touring artists who are always on the move. Bad weather? No problem. The Padded Bag for FX 300 keeps your equipment dry with a water-resistant nylon exterior. That means no nasty surprises getting in the way of your show. Space for your accessories and more. Carry all your gear with ease thanks to a large accessory pocket. Whether youre setting up or packing down carrying is easy with an ergonomic handle and shoulder strap. Live sound has never been this pain free.

The Nektar NP-1 and NP-2 universal foot switch pedals are solid, rugged and ideal for both studio and stage. Rubber gripping keep them in place during performances and polarity switching ensures they work with any keyboard or electronic product, requiring a foot switch. Universal piano style keyboard sustain foot switch pedal. Solid metal pedal and base with rubberized cover. Rubber foot plate for solid floor grip. Polarity switch - works with all keyboards. 6ft cable with 1/4'' TS jack plug. Weight: 1.6 lb.
Cable Length: 1,8 m
Type-A Connector: Jack MONO 6,3 mm Male
Made in: China
Original Colour by Producer: Black;Black
Polarity Switch: Yes
Compatible with: Universal
Type: Sustain Pedal
Colour: …

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Made in: Vietnam
Variant: Large
Material: Aluminium
Colour: Black
Size: L

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.