Effects Pedals

The EHX Pico Platform Compressor / Limiter is a powerful and versatile studio-style compressor enclosed in a pico-sized package. Borrowing from the original, the Pico Platform condenses the comp section of the full-sized Stereo Platform for those looking to fit smooth studio compression onto any pedalboard. Packed with 2 modes and Hard/Sort Knee compression options, it is a perfect fit for sculpting your dynamics with professional precision. Use the Pico Platform compressor / limiter on any instrument for precise and powerful control of your signal’s volume and of course, extended sustain on leads. Add subtle dynamic control to level out peaks and valleys in your signal or give your sound …

Overdrive / Pedal Design Foot Pedal / Effects Overdrive

Overdrive, optional optional power supply, battery operation possible, Low EQ, Balance and Gain, e-bass effect pedal, HIgh EQ, controls for: Level, power consumption: 15 mA
Battery Operation: Yes
Controls: Level;Gain;Balance;EQ
Inputs: Mono
Outputs: Mono
Battery Detail: Al/Mn
Type: Overdrive
Power Supply: Adapter or Battery;9V
Battery Type: 9V
Made in: Taiwan
UK/EU Power supply included: No
True Bypass: None

1 input, bass, keyboards and even vocals, status LED, 1 output, metal switch, very solid cover, speed control, power with 9v battery, optional power supply
Battery Operation: Yes
Controls: Speed
Colour: Orange
Number of Buttons: 2
Made in: USA
Inputs: Jack 6,3 mm TS
Battery Type: 9V
True Bypass: Yes
Outputs: Jack 6,3 mm TS
Power Supply: Adapter or Battery
Type: Phaser
UK/EU Power supply included: No

Analog Distortion Pedal for E-Guitar, Switch for Crunch Modus, 2 Status-LED, Works with 9V-Battery or Dunlop ECB-003 AC Adapter (optional not included), Control for Output, Tone and Distortion, Made in USA.,
Power Supply: Adapter or Battery
Controls: Output;Distortion;Tone
Type: Distortion
Battery Type: 9V
Battery Operation: Yes
True Bypass: Yes
Inputs: Mono
Made in: USA
Outputs: Mono
UK/EU Power supply included: No

Pedal Design Foot Pedal / Operation digital

Bass pedal effect - pre-amp and overdrive. The three-band EQ includes Treble (boost/cut above 1 kHz) and Bass (boost/cut below 200 Hz) controls, plus a Mid switch which provides a 9 dB boost or cut at 500 Hz. Three signal path options determine where the EQ is applied. In Distortion Mode the EQ comes after the distorted signal and has a powerful effect on its timbre while the clean signal is not affected. In Input Mode the EQ comes first in the signal path affecting both the clean and distorted signals. Boosting frequencies in this mode can drive the distortion to a more saturated state. In Dry Mode the EQ affects the clean signal, but not the distorted signal.
User-friendly controls include …

Delay / Pedal Design Foot Pedal

Envelope filter effect pedal for guitar and bass guitar. This pedal has two main sound settings, which are selected by a two way central switch. The Up is mainly suitable for guitars and the Down setting emphasizes bass frequencies making it the ideal setting for a good bass guitar sound. The Level pot controls the sensitivity of the envelope, Range controls the range of frequencies which are affected by the envelope. This pedal´s footswitch works in True Bypass and has a blue LED signal light. DOD 440 is made of light aluminum alloy and it´s powered by a 9V battery or a power adaptor, which is not included.
Outputs: Jack 6,3 mm TS
Power Supply: 9V DC ( - );Adapter or Battery
Controls: Level;Range;Voice…

Mono volume pedal, perfect for use with passive instruments with a single, mono input/output. A separate tuner out is included, allowing you to mute the instrument output, while still sending signal to your tuner. A micro-taper switch behind the jack area, under the footplate, gives you two distinct volume swell rates, and the standard 250kΩ potentiometer works great with passive instruments. Features centerless, ground 1/2" diameter stainless steel main pivot shaft , tough long lasting Kevlar cable, stainless steel springs. Dimensions: 3.5" W x 10" L x2 3/8" H (89 x 254 x 60mm).
Made in: Malaysia
Type: Volume
True Bypass: None
Outputs: Tuner;Mono
UK/EU Power supply included: No
Inputs: Mono…

The Palmer PW9V is a standard 9 volt power supply which can be used to power a range of electric guitar and bass effects pedals. With a maximum power consumption of 500 mA and lengthy cable of 1.50 metres the PW9V is the perfect addition to your set up as it allows you to save money on 9 volt batteries.

Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards.
Made in: Germany

The Electro Harmonix 9LDC-500 Power Supply grants you an easy tidy setup. Delivering 9 volts DC this power supply is suitable for the 2880 HOG Holiest Grail and 16-Second Delay pedals and will ensure theyre given the ultimate fuel they need to perform at their best. Play without the burden of electrical noise tainting your set use time and again thanks to immense durability and equip yourself with the kind of quality that only Electro Harmonix can provide. Whats more the 9LDC-500 also offers brilliant heat reduction and voltage damage protection meaning you can rely on it to deliver every time.

Compact momentary footswitch/sustain pedal compatible with Korg keyboards and other Korg devices. It can be successfully used as both sustain pedal and footswitch compatible with assignable footswitch jacks. Pedal provides 1/4" TS plug that is easy to connect and has tough, moulded plastic body with the non-slipper rubber base that keeps the pedal in place. Dimensions: 80 x 92 x 30 mm. Weight: 120 g.
Type: Sustain Pedal;Damper
Compatible with: Universal
Original Colour by Producer: Black;Black
Colour: Black
Cable Length: 1,5 m
Polarity Switch: No
Type-A Connector: Jack MONO 6,3 mm Male
Made in: China

The DAddario XPND Pedal Riser is a blessing for the pedal enthusiast. Sometimes your favourite stompbox is at an awkward position or angle on stage making it hard to engage when its needed most. But with DAddarios handy pedal riser youll be troubled no more. Built from ultra-durable aluminium its simple to install and will raise your pedal to a prime easily accessible position.Even better you can fit a number of these across your XPND pedalboard if youre a real effects nut and with built-in cable routing itll help keep your stage manageable. This smaller size is ideal for a single pedal.

Instrument Equipment Bag

Professional piano-style universal sustain pedal or footswitch controller that is the perfect product for keyboard players who want the most realistic pedal action. This classic-style, high-quality switchable damper pedal is used in the same manner as the sustain pedal on an acoustic piano and works with any M-Audio keyboard. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially designed rubber bottom that grips the floor and stays put while you play. A 1.8m long cable with 1/4'' connector is included.
Original Colour by Producer: Black;Black
Made in: China
Type: Sustain Pedal
Polarity Switch: Yes
Compatible with: Universal
Type-A Connector: Jack MONO 6,3 …

Universal piano style sustain pedal. The Alesis ASP-2 is the perfect product for keyboard players who want the most realistic pedal action. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially-designed rubber bottom that grips the floor and won't move while you play. This classic-style pedal works with any Alesis digital piano, keyboard or MIDI controller and it also has a polarity switch for compatibility with virtually all other branded keyboards. Features: Classic and durable design with authentic piano style feel; Hardwired 6' (1.82m) cable with 1/4'' (6.35mm) connector; Polarity switch for compatibility with all electronic keyboards
Colour: Black
Type-A …

Wall Adapter Power Supply. 9V DC power supply, 2000 mA, Polarity: (-) center, (+) ring, Euro plug
Plug Type: Barrel
Polarity: Center Minus
Voltage: 9V
Made in: China
UK/EU Power supply included: No
ChargerType: Power Supply
Current (mA): 2000.0
Current: 2000 mA
Power Supply: 240V

Custom moulded in the UK to fit the contours of the Boss 200 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 200 Series.
Made in: United Kingdom
Compatible with: Boss 200 Series
Type: Dust Cover

Universal expression pedal. Compatible with most expression pedal sockets. Rubber feet for solid floor-grip. Rubber contact surface. Sensitivity pot. Polarity switch. 183 cm cable with 6,3 mm jack plug. Weight: 318 g. Colour: Black
Made in: China

The Decksaver Eventide H9 & H9 MAX Cover is a high-quality cover designed to accommodate most two-button switch guitar pedals by Eventide protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include …

The Decksaver BOSS STOMP BOX Cover is a high-quality cover designed to accommodate your stompbox protecting it while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.

Custom moulded in the UK to fit the contours of the Eventide 3 Switch. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Eventide 3 Switch.
Compatible with: Eventide 3 Switch
Type: Dust Cover
Made in: United Kingdom