Car Jacks

All steel construction with heavy-duty, foot operated, integral hydraulic pump and ram assembly. Fitted with platform safety lock device to fix at two working heights of 490 and 710mm to prevent accidental lowering. Sliding panel platform and front wheel clamp assist removal of rear motorcycle wheel. Support platform fitted with full width loading ramp. Base assembly fitted with transport wheels and lock-downs to prevent lift moving during use. Suitable for use with centre-stand motorcycles or with paddock stand. Features & Benefits: • Min./Max. Height: 190-710mm. • Table Size (W x L): 690 x 2200mm. • All steel construction with heavy-duty, foot operated, integral hydraulic pump and ram assemb…

Features & Benefits: • Jack Stands ideally suited to the professional trade workshop!• Manufactured from heavy duty steel• Pin type for added safety and strength• Pin wire strap secured to stand to prevent loss• Deep saddle for positive location under vehicle• Adjustable Height• Conforms to international standards CEMaterial: Heavy Duty SteelStandard: CECapacity: 1350kgMinimum Height: 255mmMaximum Height: 370mmLift Height: 110mmSaddle Diameter: 18 x 50 x 62mmBase Area: 195 x 180mm

This trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Manufactured to EN1494 SpecificationContents:1 x Draper Expert Professional Low Profile Fast Lift Garage Trolley Jack, 3 Tonne, BlackSpecifications:Capacity: …

Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg. Easy to manoeuvre around the workshop or garage. Front and rear lever operated wedge gates allow for easy loading and unloading to the 2000 x 200 x 50mm (L x W x H) loading track. Includes a 5-position side stand platform to fit varied length side stand, front/rear steel pins to keep the motorcycle on the dolly during moving, and smooth-rolling dual castor wheels. Features & Benefits: • Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg. • Easy to manoeuvre around the workshop or garage. • Front and rear lever operated wedge gates allow for easy loading and unloading. • 5-Positi…

Rugged construction features drop-forged and heat treated pinion gear with totally enclosed mechanisms. Equipped with heavy-duty brake and high quality alloy steel chain for durable and safe operation. Free-chaining feature permits slack in the load chain to be taken up by-hand before engaging the ratchet arm. Features & Benefits: • Rugged construction features drop-forged and heat treated pinion gear with totally enclosed mechanisms. • Equipped with heavy-duty brake and high quality alloy steel chain for durable and safe operation. • Free-chaining feature permits slack in the load chain to be taken up by-hand before engaging the ratchet arm. • Model No. LH750 Specifications: Model No LH750…

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. Features & Benefits: • Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. • Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. • Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. • Supplied with wall mounting fasteners. • Model…

Fitted with overload valve. Base and reservoir machine welded for increased strength and reduced chance of leakage. Threaded pump assembly allows for easy disassembly and maintenance. Supplied with 4-piece operating handle. Fitted with carrying handle. Service kit readily available. Features & Benefits: • Min./Max. Height: 125/215mm, allowing low entry. • Telescopic 2-stage ram for higher maximum lift. • Compact closed height. • Cast base with threaded components. • Supplied with 4-piece operating handle. • Carrying handle. • Model No. BJ10LE Specifications: Model No BJ10LE Brand: Sealey Capacity: 10 Tonne Hydraulic Lift: 90mm Maximum Height: 215mm Minimum Height: 125mm Nett Weight: 7.70kg…

Enables commercial sized wheels and tyres to be removed/installed on hub studs. Features & Benefits: • For commercial sized wheel and tyre removal/installation. • Fork Centres: 535mm. • Length: 1255mm. • Model No. TH002

Expert Quality, long chassis, extra low profile pneumatic jack. The 125mm entry height has a total reach of 2210mm and is capable of lifting 40 Tonnes. The 3 stage adjustable ergonomic handle is fixed with a 'Slow Down' valve and a 'Self-Return' switch for increased safety and easy use. Fitted with industrial quality seals prolonging the life of the jack, a safety overload valve and twin rubber coated wheels for a quieter and smoother operation, whilst also preventing damage to garage floors and improving manoeuvrability. Supplied with 45mm and 75mm height lift extensions and a 1/4" BSP airline connector.Capacity stage 1 40 Tonne (40,000kg)Capacity stage 2 20 Tonne (20,000kg)Capacity stage …

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre