United Kingdom

Car Jacks

 prices on 1105 models  
Show
• Steel tube chassis with four ø100mm nylon castors.• Pedal operated hydraulic lifting action with safety locking pin when under load.• Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profile.• Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface.• Note: Skates sold as singles, but must be used in pairs.Steel tube chassis with four ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profile. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs …
from £252.95 up to £364.40 
Compare prices and buy Sealey Wheel Skate Hydraulic 680kg Capacity
£253.00
£253.00
£364.00
Compare prices3
High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …
£23.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Fully certified and approved to comply with MOT req…
from £1,323.95 up to £1,692.54 
Compare prices and buy Sealey Jacking Beam 3 Tonne with Arm Extenders & Flat Roller Supports
£1,324.00
£1,324.00
£1,600.00
£1,693.00
Compare prices4
Expert Quality portable and compact twin stage pneumatic jack capable of lifting 40 Tonnes. The 3 stage adjustable ergonomic handle is fixed with a Slow Down" valve and a "Self-Return" switch for increased safety and easy use. Fitted with industrial quality seals prolonging the life of the jack a safety overload valve and twin rubber coated wheels for a quieter and smoother operation whilst also preventing damage to garage floors and improving manoeuvrability. Supplied with 45mm and 75mm height lift extensions and a 1/4" BSP airline connector. Manufactured tested and certified to the current EN1494 standard.PTDDRPDIR02079"
£998.86
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £27.95 up to £35.88 
Compare prices and buy Draper Wide Load Sling, 3m x 120mm, 4 Tonne
£28.00
£28.00
£36.00
Compare prices3
Lifter, with hydraulic unit and nickel plating, type V5, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 252 - 392 mm. Lifting range with lifting toe = 15 - 165 mm. Lift = 140 mm. Max. load with lifting head = 5 t. Max. load with lifting toe = 5 t. Weight = 21 kg. Product type = hydraulic jacks. Specifically for cleanrooms (foodstuffs, pharmaceuticals, etc.). Can also be used where space is tight due to the compact design. High quality, compact steel construction fully nickel plated. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations,…
£2,974.80
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
Lightweight jack stands are used to support your vehicle after lifting with a jack. Wide pyramid base provides extra strength and stable support Made of high quality forged steel with a welded frame design for durability, suitable for a variety of vehicles including small cars, SUVs and light trucks Height adjusts from 11" to 16.5" with a 3 ton load capacity Multi-position ratchet has a sawtooth design that allows for quick height adjustment Features a large saddle area for better contact with the load to be supported. tested for reliability and safety to meet ASME standards
£48.63
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Zinc Plated Side Winding Parking/Lifting Jack with Round Fixing Tube supplied with Inner Tube for welding. Height Retracted 530mm, Height Extended 905mm, Box Size 60mm, Round Base Diameter 150mm, Load Capacity 2000kg
£339.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The WINNTEC® from SIP 30 TON Bottle Jack is perfect for pushing and pressing in a range of garages and workshops, with increased versatility achieved through full horizontal and vertical operation and rugged performance via a range of heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 285mm to 465mm lifting height range Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation Integrated overload protections for safety WINNTEC® from SIP 3-Year Warranty
£134.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance.• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.• Optional fork cradle support for front paddock stands. • …
from £12.95 up to £13.95 
Compare prices and buy Sealey Fork Cradle Supports for Front Paddock Stands
£13.00
£14.00
£14.00
Compare prices3
2 Bellows Hand Held Air Jack
£449.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Replacement hydraulic ram for PH20.V4 engine crane.Replacement hydraulic ram for PH20.V4 engine crane.• Replacement hydraulic ram for PH20.V4 engine crane. • Model No. PH20.V4-ETechnical Specification:Nett Weight: 11.8kgRam Capacity: 8000kgRam Diameter: 33.9mmRam Travel: 502mmPump Type: Single SpeedRam Pin Hole Diameter: 16.4mmClevis Pin Hole Diameter: 16.4mmMounting Point Distance (Min.): 636mmOverall Length (Min.): 670mmBase mount Type: Double ClevisDimensions: Length: 130mm x Height: 125mmWeight: 11.852KgWarranty: Consumable
from £123.95 up to £144.61 
Compare prices and buy Sealey Hydraulic Ram for PH20.V4
£124.00
£130.00
£145.00
Compare prices3
VEVOR Air Hydraulic Bottle Jack, 20 Ton/40000 LBS All Welded Bottle Jack, 265 - 500 mm Lifting Range, Manual Handle and Air Pump, for Car, Pickup, Truck, RV, Auto Repair, Industrial EngineeringAir Hydraulic Bottle JackFlexible Height AdjustmentEasy to OperatePremium MaterialMaintenance MethodLonger HandleWorking Pressure: 0.5Mpa,Item Model Number: QJD-Q01-020A,Max. Capacity: 44092 lbs/20 Ton,Net Weight: 32.4 lbs/14.7 kg,Air Inlet Connector Type: 20 PM,Lifting Range: 10.4-19.7 inch/265-500 mm,Product Size: 8.7×6.3×10.4 inch/220×160×265 mm
£73.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
Pair of chocks to prevent vehicles moving whilst working with trolley jacks, scissor jacks, bottle jacks, axle stands or on a slope. Display carton.
£14.32
Electricalworld.com
Delivery: in United Kingdom
Report
Buy!
Electricalworld.com
Professional hydraulic, low-profile lift. Capacity 2500 kg. Lifting range 80 - 365 mm. THICK profiles.When you buy from Elektro-Mar, you buy from a trusted seller ✅Item descriptionCar lift with a lifting capacity of 2500 kg. The sheet is joined into special profiles that increase the rigidity of the structure. The lift is equipped with steel wheels of the front axle and steering wheels of the rear axle, as well as an integrated control valve with control in the lift lever. The lift is recommended for operating various types of motor vehicles. A hydraulic cylinder operating in the horizontal axis and low construction profiles allow work in the range of 80 to 360 mm…
£222.44
Joom.com
Delivery: in United Kingdom
Report
Buy!
Joom.com
The Pitking Products quick lift "monkey" jack is designed to be carried on-board the rally car for use in a critical/emergency situation. The jack is lightweight and compact with a sturdy base which is produced from a high grip plastic/rubber suitable for all terrains giving the jack a solid stand point every time. 730mm maximum lifting height ideal for where extra height is neededLightweight and compact designIdeal to keep in a rally car for emergency repair useTo operate, the jack is positioned next to the vehicle at the jacking point, with the protruding leg on the platform used to raise the car. The jack has a ratchet mechanism to lift the vehicle and travels from the minimum point of
£195.55
Demon-tweeks.com
Delivery: in United Kingdom
Report
Buy!
Demon-tweeks.com
Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1.5 metre
from £9.95
Compare prices and buy Sirius Round Lifting Strap Reinforced Sling 1.5m 1000kg LS500-0103
£10.00
£10.00
Compare prices2
The Clarke CTJ2500SUV is a 2.5 tonne heavy duty trolley jack, including an SUV extension for vehicles that require high ground clearance. Solid steel construction, durable powder coated finish and fitted with an integrated carry handle for portability. The CTJ2500SUV offers a saddle height from 150-245mm without the extension or 425-530mm with the extension. The jack offers a quick lift function and also includes a 2 piece handle, with simple twist lock and release operation.
£101.94
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable
from £7.52 up to £8.95 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type B V3
£8.00
£9.00
Compare prices2
Black puncture proof tyre on a pressed steel welded rim with ball bearings. Diameter 300mm, tread width 90mm, bore size 20mm, hub length 65mm. Load capacity 150kg.for non towing applications.
£59.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
QLT450 2.5 tonne capacity. Made of a lightweight aluminium and steel construction. Its low profile makes it ideal for any type of car, including sports and race cars, and its swivel castor wheels enable easier positioning under vehicles. It also has a quick lift with dual pump and a rubber hand grip for user comfort. Dimensions 685 x 345 x 180mm.
from £214.99 up to £259.99 
Compare prices and buy Kennedy 2.5-Tonne Low Profile Quick Lift L/W Trolley Jack
£215.00
£260.00
Compare prices2
BMW trolley jack rubber pad designed to avert damage to the underside of a BMW when using a trolley jack thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.PTDDRPDIR41814
£5.68
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …
from £32.95
Compare prices and buy Sirius Car Ramps Pair Total 2 Tonne Capacity CR2
£33.00
£33.00
Compare prices2
Travel jack, wheels with polyurethane tyres, max. load 1000 kg, lift 33 mm. Supplied = assembled. Lift = 33 mm. Max. load = 1000 kg. Frame material = steel. Wheel diameter = 136 mm. Wheel type = wheels with PU tyres. Footplate height max. = 45 mm. Footplate height min. = 12 mm. Scope of delivery = 2 castors, 1 lifting mechanism. Product type = furniture transport units. Application = diverse. For moving heavy cupboards, tool cupboards and machines, even when loaded. Easy and fast system with little force required. Extremely handy due to a compact design. Move heavy loads with just a few hand movements: lift using the lifting rod and then push the hook of the roller underneath - finished. The …
£370.80
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height