Car Jacks

Adapter suitable for all farm jacks. For use on Land Rover Defenders with jacking point tube. Model No. FJLR

Features and Benefits • Jack Stands ideally suited to the professional trade workshop!• Manufactured from heavy duty steel• Pin type for added safety and strength• Pin wire strap secured to stand to prevent loss• Deep saddle for positive location under vehicle• Adjustable Height• Conforms to international standards CEMaterial: Heavy Duty SteelStandard: CECapacity: 1350kgMinimum Height: 255mmMaximum Height: 370mmLift Height: 110mmSaddle Diameter: 18 x 50 x 62mmBase Area: 195 x 180mm

Designed to prevent damage to the vehicle's frame rails/pinch weld seams whilst jacking up the vehicle. The saddle's surface protects and prevents damage. Made from robust and durable rubber. Designed to prevent damage to the vehicle's frame rails/pinch weld seams whilst jacking up the vehicle. The saddle's surface protects and prevents damage. Made from robust and durable rubber.

BESPOKE - Designed for the jacking points to protect and prevent damage to side skirts and battery.
STRONG - Made from high quality rubber, providing a sturdy and durable point of contact.
SECURE - Features a rubber O-ring on the spigot, creating a secure fit to the vehicle.
CONVENIENT - Supplied in a storage bag.

Everbuild Black Jack® 905 All Weather Roof Coating is a solvent-based, full bodied, black, brushable compound with added fibres for reinforcement. It is specifically designed for overcoating leaking roofs. Dries to a tough, black coating.Additional Information:• Seal Type: Bitumen Products• Size (L): 5

Everbuild Black Jack® 902 Bitumen & Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints and roof coatings. Also suitable as a primer prior to applying Black Jack® Flashing Tape.1 x Everbuild Black Jack® 902 Bitumen & Flashing Primer 1 litreAdditional Information:• Seal Type: Primer• Size (L): 1

Do you have a compressor? Then use the pneumatic jack from MSW! Thanks to the Euro connector, the car jack is immediately ready to powerfully lift vehicles using compressed air. The car jack's compact design provides exceptional flexibility, enabling quick and direct use in your workshop. The pneumatic car jack serves as a powerful lifting tool. With a working pressure of 5 - 10 bar, you can easily lift vehicles weighing up to 3000 kg. The three rubber air cushions reach a lifting height of 40 cm in just five seconds. The lifting device is stabilised by an extendable inner cylinder. Perform lifting operations reliably with the car jack, thanks to the additional safety provided by the overload …

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – the two handles with rubberised ends ensure the pneumatic jack is always in the optimum position
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder provides added stability when exten…

High-density plastic with anti-slip steel bar. Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features and Benefits • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (W x D x H): 200 x 475 x 225mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Ma…

Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter Ø1500-1800mm. Suitable for vehicles below 40 Tonne. Features and Benefits • Heavy-duty nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Features robust carry handle that can also be fitted with a rope or chain (not included). • Suitable for commercial, agricultural and aircraft tyres of di…

Farm jack mount for use on 4x4 external spare wheel mount. Designed for transporting farm jacks when going off-road. Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel.

Off-road base compatible with most high-lift farm jacks. Designed to spread ground force of jack to prevent sinkage on soft surface. Includes handle coupler to lock most high lift farm jacks handle in position for secure transportation. Base size 184 x 185mm. Model No. FJKIT

The Draper Wheel Dollies are expert equality, each fitted with four heavy duty white non-marking castors. The robust steel manufacture enables up to 454kg weight to be carried on each dolly. They are designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces. Specifications 2 x Draper Expert Wheel Dollies  Max. Weight: 454kg per Dollie Material: Steel  4 x heavy duty castors Non-marking castors Dimensions 600 x 360 x 100mm Colour: Blue

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock. Conforms to DIN 76051-D53Z and complies with ADR regulations Features and Benefits • Expert Quality • For stabilizing HGVs whilst parked • Anti-slip, non-sparking, highly visible heavy duty HDPE plastic Contents 1 x Wheel Chock for Larger Than 920mm Dia. Wheels

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Features and Benefits • Expert Quality • For semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. • Can also be used for the lifting and transfer of steel beams and as a pulling clamp • Test certificate included Specifications Depth (Beam Clamp): 74mm Girder Beam Width: 75-260mm Overall Width (Beam Clamp): 180-360mm Safe Working Load (SWL): 2 tonne Steel Plate Thickness: 6mm …

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Features and Benefits • Expert Quality • For semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. • Can also be used for the lifting and transfer of steel beams and as a pulling clamp • Test certificate included Specifications Depth (Beam Clamp): 64mm Girder Beam Width: 75-260mm Overall Width (Beam Clamp): 180-360mm Safe Working Load (SWL): 1 tonne Steel Plate Thickness: 5mm …

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.

Made from high quality neoprene that is resistant to grease, water, ozone, abrasion and extremes of temperature. Supplied with fitting kit including clips and grease sachet.

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features and Benefits • Expert Quality • Polyester webbing 90mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 6000kg for a load between the loop eyes ('U' configuration) …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features and Benefits • Expert Quality • Polyester webbing 90mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 6000kg for a load between the loop eyes ('U' configuration) …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features and Benefits • Expert Quality • Polyester webbing 90mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 6000kg for a load between the loop eyes ('U' configuration) …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features and Benefits • Expert Quality • Polyester webbing 90mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 6000kg for a load between the loop eyes ('U' configuration) …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features and Benefits • Expert Quality • Polyester webbing 90mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 6000kg for a load between the loop eyes ('U' configuration) …

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 6 metre