Car Jacks

• Handles and levels heavy, off-centre loads quickly and easily.• Ball-bearing handle allows for a smooth and easy adjustment.• Three adjustment holes accommodate different sized engines.• Ideal for car, van, truck and marine engines.• If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum.• Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links.Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pa…

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2 metre

• Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism).• While raising, the lift can be stopped at any height before locking the vehicle out level.• Once raised, it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle).• Three adjustable width settings (775mm/1130mm/1530mm) allows narrow chassis cars to be lifted, such as MGs and other small classic cars. • Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure.• …

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

• 78-510mm lifting range • Single piston pump for a fast lift, reaching full height in just 2.5 strokes • Low profile design • Integrated rubber saddle pad prevents damage to underside of vehicle • EVA foam handle prevents panel damage • Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors • Safety valve prevents the jack from overloadingThis trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrat…

• Suitable for supporting large multi-cylinder engines (maximum weight 75kg).• The supports can rotate for accessibility to all parts of the engine.• Width, height and length adjustable.• Capacity: 75kg.Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.• Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports can swivel for accessibility to all parts of the engine. • Width, height and length adjustable. • Capacity: 75kg. • Model No. MES02Technical Specification:Capacity: 75kgEngine Support Span: 130-370mmHeight: M…

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…