Car Jacks

BLACK trapezoidal lift Capacity up to 1500kg Lifting capacity up to 1500kg Swivel rubber head included Quick lifting High-quality trapezoidal car lift with a manual drive, with a lifting capaci more→ty of up to 1500 kg. The working height is from 90 mm to 330 mm. The jack is designed for lifting passenger cars with a total weight not exceeding 1500 kg in order to replace the wheel. Its other advantages are ease and speed of operation as well as resistance to dirt. The device has a rotating head, and when folded, it takes up very little space Technical data lifting capacity:1500kg Minimum height :90mm Maximum height :330mm Libra :approx. 2kg

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base tha more→t provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

0.2 kg

The SIP 12 Ton Bottle Jack is compact and powerful, and features a built-in safety valve, screw extension for adjustable lifting heights, and a serrated saddle to give secure load contact. 12 Ton maxi more→mum weight capacity 210mm to 415mm lift height range 60mm screw extension is included Serrated saddle for secure contact Durable and powerful construction Compact and very lightweight Reliable overload protections Heavy-duty cast iron base Integrated safety valve

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controll more→ed lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

The TÜV and GS tested HEYNER 347110 Ultra Lift S PRO is a high-quality ratchet scissor jack - suitable for mini vans, small trailers and small cars with a total weight of up to 1.6 tonnes Side skirts more→height from the car: min. 25 cm | 100% lifting force: 250 - 380 mm | weight: 1.7 kg | material: powder-coated steel Q235 | trolley jack with 17 ratchet (adjustable direction) for comfortable lifting and lowering without clamping your hand Please note: the entire lifting force is reached in a range between 250 and 380 mm. Lifting work under 250 mm creates increased forces on the ball bearing. Lifting is not recommended for safety reasons. ✔️ Regardless of the workshop, simply lift the car to ch…

Quality is the first with best service. customers all are our friends. Bringing more convenience to the people in their daily life And this product is environmentally friendly and durable Specificati more→on: This Universal Jack Pad Adapter fits most Japanese and domestic made cars. This product is used to protect the undercarriage metal jack point railing that is on most vehicles. Highly durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken. Polyurethane is soft enough to not harm your vehicle's metal yet rigid enough to support it. Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and

Constructed from heavy gauge steel for heavy-duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts a more→nd locks in three positions with a built-in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning.

The JCB-TH33013 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 3 tonnes in weight.Constructed with a high quality and heavy-duty more→steel frame, the JCB-TH33013 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 505mm in height.The JCB-TH33013’s chassis utilises an extra low-profile design, which allows the trolley jack to reach lower clearances, particularly useful for sports cars or vehicles with reduced ground clearance.Thanks to its integrated double-piston mechanism, the JCB-TH33013 is a quick-lift trolley jack, which will save you precious time an…

Screw adjustment with easy-to-use spinner nut and ball bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range.

This 30 Tonne Bottle Jack is fully tested and fitted with an overload valve to comply with the latest CE directives, whilst the cast base with threaded components allows for easy disassembly.

Air/Hydraulic bottle jack capable of both air assisted or manual operation. Fitted with safety overload valve and manufactured in the EU. All steel one-piece base reservoir and pump cylinder design more→gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90° rotating pump and telescopic pump handle and has moulded carry handles incorporating storage for the pump handle. Service kit readily available.30 Tonne Bottle Jack Manual/Air Hydraulic• Min./Max. Height: 242/455mm.• Air assisted or manual operation. • Safety overload valve.• All steel one-piece base reservoir and pump cylinder.• Telescopic pump handle.• 90° Rotating pump.• Moulded carry

Bottle jack, with hydraulic unit, max. load 12 t. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Overall height from - to = 215 more→- 400 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Seal Repair Kit for ZT1120454X by Kennedy

Rubber Pad For Bottle Jack | Jack Saddle Protector Rubber Pad is available in S, M , L sizes Undercarriage Guard Pad For Car Jack Safe Lifting Rubber Pad For Lifting Jack Brand: alca Germany S si more→ze for alca bottle jack 2 ton (431000), 2 ton (431020), 3 ton (431100), 3 ton (431130), 5 ton (432000), 5 ton (432050). M size for alca bottle jack 8 ton (432200), 10 ton (432210), 12 ton (433000), HEYNER bottle jack 5 ton(346050). L size for alca bottle jack 15 ton (433150), 20 ton (4333000), HEYNER bottle jack 10 ton (346100) 10 ton (346110)