Car Jacks

Textured base provides better grip on the jacking beam. Soft surface prevents damage to the car underbody when lifted. Slot in the support block allows the car to be lifted by the sill. Manufactured f more→rom rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking jacking beams.Features & Benefits:• Textured base provides better grip on the jacking beam.• Soft surface prevents damage to the car underbody when lifted.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from rubber, providing a sturdy and durable point of contact.• Suitable for use with Sealey Viking jacking beams.• Model No. SJBEX.A03Specifications:Model No SJBEX.A03…

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes more→can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg

• Fitted with overload valve. • Dual-stage rams allow for longer travel.• Stage 1 capacity 7500kg.• Stage 2 capacity 4000kg.• Lower retracted and higher extended heights. • Base and reservoir machine more→welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.Technical SpecificationCapacity: 4 TonneHydraulic Lift: 170mmMaximum Height: 390mmMinimum Height: 160mmNett Weight: 6.4kg Capacity:Stage 1 7500kgStage 2 4000kgScrew Adj 60mmScrew Extension: 60mmTechnical Specification:Capacity: 4 Tonne Hydraulic Lift: 170mm Maximum Height: 390mm Minimum Height: 160mmDimensions: Length: 155mm x Height: 170mmWeight: 6.6KgWarranty: 1 year

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one en more→d (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). A more→ll duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 6 metre

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength more→polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 6.4mm. Size ø106.5mm. Fits saddle ø99-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 6.4mm. • Size: ø106.5mm. • Fits saddle ø99-106mm. • Model No. JP02Technical Specification:Nett Weight: 0.06kgJack Pad Size: ø106.5mmStyle: Type BProfile Depth: 6.4mmTo Fit Saddle Size: ø99-106mmWeight: 0.06kgDimensions: Length: 10mm x Height: 190mmWeight: 0.07KgWarranty: Consumable

• Heavy-duty trailer jack with swivel mounting.• Suitable for handling trailers with heavy nose weight.• Integral swivel weld-on mounting.• Min./Max. Height: 230/480mm.Heavy-duty trailer jack with swi more→vel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.• Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm • Model No. TB373Technical Specification:Capacity: 900kgMaximum Height: 480mmMinimum Height: 230mmNett Weight: 4.62kgDimensions: Length: 253mm x Height: 125mmWeight: 5.136KgWarranty: 1 year

• Durable 2.1kg rubber wheel chocks (1.05kg each).• Prevents car, caravan or light aircraft moving when jacking or parked on an incline.• Supplied on sturdy 550mm rope for easy storage and removal fro more→m underneath wheels.• Not intended for use on sloped ground over 10°.Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Durable 2.1kg rubber wheel chocks (1.05kg each). • Prevents car, caravan or light aircraft moving when jacking or parked on an incline. • Not intended for u…

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as more→most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground c more→learance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …