Car Jacks

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 3000kgTest Load: 4500kgLift Height: 3mHook Aperture: 46mmHoist Weight: 25kg

Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 220-350mm. Features & Benefits: • Lifts and stabilizes any dual swing arm motorbike quickly and easily. • Fitted with width and angle adjustable rubber support pads. • Rubber supports mounted on heavy-duty box section for continuous professional use. • Bobbin Supports available as an optional extra - Model No. RPS1BS.…

Delivered in knock-down form for reduced freight cost. Heavy-duty front and rear castors are on extendable legs to give improved stability, particularly when operating at maximum jib extension of 1447mm. Side pump access with removable handle. Features & Benefits: • Economy model - requires self-assembly. • Heavy-duty castors on extendable legs for improved stability. • Lifts 1000kg at 937mm and 250kg at 1447mm jib extension. • Side pump access with removable handle. • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery. • Model No. SC10LR Specifications: Model No SC10LR Brand: Sealey Height Jib Down: 1446mm Height of Frame: 180mm Length Legs …

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 60mm, 2 Tonne

Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle. Features & Benefits: • Optional fork cradle support for front paddock stands. • Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. • Yellow phosphate finish for added corrosion resistance. • For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle. • Model No. FPSFC Specifications: Model No F…

Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30 Tonne. • Chocks supplied on rope for easy storage and removal from underneath wheels. • Dimensions (W x D x H): 455 x 155 x 140mm. • Model No. WC11

Provides extra safety when locating awkward jacking point. Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin. Features & Benefits: • Provides extra safety when locating awkward jacking point. • Ideal for front wheel drive vehicles. • Suitable for jacks with a 31-33mm saddle spigot pin. • Model No. X136

Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle.