Car Jacks

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms. This model has the additional advantage of a 360 adjustable rotating cross beam to enable a greater range of support options when in use.

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• This engine stand accepts a wide variety of engines and transmissions.• The Geared Handle Drive allows for easy and accurate 360º rotation in order to access all parts of the engine. • Mounting head has four fully adjustable arms with bolt holes to accommodate various load sizes.• Fitted with screw lock to ensure load is secured.• Swivel castors provide excellent manoeuvrability.• Assembled with clevis pins and clips so the stand can be folded for storage.• Maximum Load Length: 700mm.This engine stand accepts a wide variety of engines and transmissions. The Geared Handle Drive allows for easy and accurate 360º rotation in order to access all parts of the engine. Mounting head has four fully a…

• Replacement hydraulic ram for SPC1000 engine crane.Replacement hydraulic ram for SPC1000 engine crane.• Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28Technical Specification:Nett Weight: 13kgRam Capacity: 5000kgRam Diameter: 31.92mmRam Travel: 585mmPump Type: Twin SpeedRam Pin Hole Diameter: 18.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 706mm**Overall Length (Min): 763mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 100mm x Height: 110mmWeight: 12.972KgWarranty: Consumable

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

• MECHANICAL LIFTING - Pedal action mechanical lift meaning there is little maintenance required.• STEEL CHASSIS - Giving a capacity of 560kg per skate.• PVC ROLLERS - Cradle vehicle’s tyre and are capable of handling up to 300mm in tyre width.• NYLON CASTORS - Fitted with 4 ø100mm nylon castor wheel for smooth movement.• NOTE: SOLD AS SINGLES, but MUST be used in pairs.Technical SpecificationCapacity: 560kgCastor Diameter: ø100mmMaximum Opening: 595mmMaximum Tyre Width: 300mmTechnical Specification:Capacity: 560kg Castor Diameter: 100mm Maximum Opening: 595mm Maximum Tyre Width: 300mmDimensions: Length: 650mm x Height: 210mmWeight: 18.2KgWarranty: 1 year

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.• Min./Max. Height: 215/515mm. • Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. • Made in the EU and fitted with safety ov…

• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Maximum Load Length: 700mm.Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm.• Accepts a wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Model No. ES550Technical Specification:Capacity: 550kgNett Weight: 27k…

GREY machine jack, max. load 7 t, 1+ items. Supplied = assembled. Max. load = 7 t. Lifting range with lifting head = 65 - 420 mm. Lift = 355 mm. Weight = 53 kg. Product type = hydraulic jacks. Sturdy steel construction for a variety of applications. Hydraulic system is protected by overload pressure valve. Finely controlled discharge valve for precise lowering. The hydraulic GREY machine jack is made of high quality steel and extremely robust. It has a max. load of 4 or 7 tonnes, can lift vehicles and machinery without difficulty and is therefore highly versatile. Its compact design provides stability and, together with the long pump lever, needs little effort to operate.