Car Jacks

Three stage pneumatic jack
Extra low profile, 125mm entry height
Long chassis, 2210mm reach
Slow Down valve
Draper 3 year warranty

This low profile trolley jack is designed for domestic and light-duty commercial use and enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm. The trolley jack has a twin piston pump for fast lifting and an integrated rubber saddle pad to prevent damage to the underside of the vehicle. It is fitted with rear-swivelling, hard-wearing nylon wheels to give quiet and smooth operation and prevent damage to garage and workshop floors.Contents:1 x Low Profile Trolley Jack, 2 TonneCapacity: 2 TonneSaddle diameter: 100mmHandle length: 1,000mmChassis length: 575mmWeight: 23.5kgMin height: 85mmMax height: 430mmAdditional Information:Capacity: 2 Tonne

Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism). During raising it can be stopped at any height before locking the vehicle level. Once raised it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle). Three adjustable width settings (775mm/1130mm/1530mm) allow narrow chassis cars to be lifted, such as MGs and other small classic cars. Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure. Features & Benefits: …

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 90mm, 3 Tonne

Features a handle and wheels for use in the garage, workshop or mobile mechanics. Lightweight with a low entry height of 135mm lifting to a maximum of 450mm in only 25 seconds. Robust high resistant diaphragm for durability. Internal, military gauge steel, telescopic interlocking core, overload safety valve and air vacuum valve for rapid lowering. Suitable for use in high risk environments such as mining or the petroleum industries. Features & Benefits: • Min./Max. Height: 135/450mm. • Air Consumption: 10.5cfm. • Lightweight and portable with 667mm handle and two composite wheels for manoeuvrability. • Can be stored vertically to save space. • Robust high resistant diaphragm for durability. • Interna…

Heavy-duty short axle stands. Sturdy welded steel construction for superior safety and strength. Large crutch for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 244/354mm. • Capacity: 14 Tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • For forklifts and vehicles with low suspension. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS7S Specifications: Model No AS7S Brand: Premier Capacity Each: 7 Tonne Capacity Pair: 14 Tonne Maximum Working Height: 354mm Minimum Working Height: 244mm Nett Weight: 10.56kg

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2.5 metre