United Kingdom

Car Jacks

 prices on 1074 models  
Show
Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEO - Trolley Jack 2tonne Low Entry Short Chassis - Orange AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set You may also refer to the individual Model No. for full specification.
£179.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and
£516.11
Demon-tweeks.com
Delivery: in United Kingdom
Report
Buy!
Demon-tweeks.com
Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…
£136.95
Tooled-up.com
Delivery: to United Kingdom
Report
Buy!
Tooled-up.com
Clarke trolley jacks raise the standard of vehicle lifting for all professional garages and workshops. With the Clarke CTJ3QLGB, one simple pedal stroke and the Quick Lift action brings the saddle into contract with your vehicle. Ideal for motor sport enthusiasts, fast-fit centres and anywhere, in fact, where speed is essential.
£179.94
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable
from £112.95 up to £132.94 
Compare prices and buy Sealey Hydraulic Ram for SC10.V3
£113.00
£120.00
£133.00
Compare prices3
Note: Image is for illustrative purposes only and may differ from the actual product
£319.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO/5LTechnical Specification:Nett Weight: 16.91kgPack Qty: 4Size: 5LDimensions: Length: 280mm x Height: 298mmWeight: 16.906KgWarranty: Consumable
from £150.95 up to £214.65 
Compare prices and buy Sealey Hydraulic Jack Oil 5L - Pack of 4
£151.00
£151.00
£199.00
£200.00
£215.00
Compare prices5
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.12 Tonne Bottle Jack• Min./Max. Height: 231/441mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ12SModel No: PBJ12S:Brand: Viking:Capacity: 12 Tonne:Hydraulic Lift: 150mm:Maximum Height: 441mm:Minimum Height: 231mm:Nett Weight: 6.4kg:Screw Extension: 60mm:PTDSEAPBJ12S
£74.24
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Screw adjustment with easy-to-use spinner nut and ball bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range.
£199.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…
£349.99
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
Buy!
Jcb-tools.co.uk
Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle.
from £20.95 up to £25.99 
Compare prices and buy Sealey Jacking Pad Set Tesla - JPT4
£21.00
£26.00
Compare prices2
Clarke's CTJ4000G heavy duty trolley jack is designed specifically for use in professional garages and workshops. This jack's features include a single piece hydraulic unit for maximum reliability, heavy gauge base construction and heavy duty wheels and castors.
£239.98
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Heavy-duty 7 Tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even …
from £734.95 up to £890.10 
Compare prices and buy Sealey High Level Commercial Vehicle Support Stand 7 Tonne
£735.00
£735.00
£788.00
£800.00
£890.00
Compare prices5
Universal Engine & Gearbox SupportDesigned to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etcRemoves the need for using cranes, transmission jacks etcUniversal tool designed for all makes of vehicle - No need for costly model specific bracketsThe unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support armsFully adjustable in all dimensions:- Extension: Min 630mm / Max 960mm- Support Plate Adjustment: 190mmSpare Parts:38360000-01 - Support Pad & Adjustable Bar
£359.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop.• Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Fitted with four ø150mm nylon castors.• Max. Width: 1485mm.• Min./Max. Height: 300/390mm.Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. • Sliding castor brackets adjust for width and rubb…
from £224.95 up to £294.18 
Compare prices and buy Sealey Transportacar Trolley Economy Model 2tonne Capacity
£225.00
£225.00
£272.00
£294.00
Compare prices4
This heavy duty trolley jack features an extra-long reach 1.4 metre chassis and large 128mm saddle. This trolley jack also benefits from a control rod on the handle which allows it to be locked in 3 positions- Saddle min/max: 150/560mm- Extra-long reach 1.4metre chassis- Handle mounted twist release valve- Handle and foot operated lifting function- Control rod on handle allows it to be locked in 3 positions- Large 128mm diameter saddle- DimePTDCLA7623090
£535.88
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.
£73.67
Electricalworld.com
Delivery: in United Kingdom
Report
Buy!
Electricalworld.com
The CTJ2250LP is a 2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance. Featuring swivel castors for manoeuvrability, simple to operate lock/unlock valve for raising and lowering, rubber contact pad to prevent chassis damage and extra wide wheels for safe, stable use. This great value jack also comes with a dual purpose wheel handle/brace and two double ended sockets, suitable for a wide range of wheel nuts, meaning the CTJ2250LP is not only ideal for garage use, it’s the perfect jack for quick wheel changes in emergency situations.
£59.94
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity. Clevis style base provides added versatility Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength. Fits most garage/shop cranes, engine hoists, and more Glide-action pressure pump is designed to lift with minimal effort. Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits International products have separate terms, are sold from abroad and may differ from local products, including …
£76.54
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 4 metre
from £21.95
Compare prices and buy Sirius Duplex Lifting Strap Reinforced Sling 4m 2000kg LS100-0204
£22.00
£22.00
Compare prices2
Scissor action jack suitable for automotive, industrial and agricultural applications. Ideal for vehicles with low ground clearance. 4tonne Front scissor nose capacity with minimum height of 65mm allows use under forklifts. 5tonne Cylinder cap capacity with minimum height of 416mm suits agricultural and other vehicles with high set jacking points.
£599.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle ø100-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 27mm. • Size: 118.5mm Square. • Fits saddle ø100-106mm. • Model No. JP01Technical Specification:Nett Weight: 0.18kgJack Pad Size: 118.5mm (Square)Style: Type AProfile Depth: 27mmTo Fit Saddle Size: ø100-106mmWeight: 0.18kgDimensions: Length: 30mm x Height: 190mmWeight: 0.196KgWarranty: Consumable
from £8.28 up to £9.29 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type A V4
£8.00
£9.00
£9.00
Compare prices3
A low entry height Trolley Jack. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. Dimensions T510L: 1010 x 365 x 135mm T525L: 1150 x 350 x 180mm
£399.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• A fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for use with Model No's. 500TTJ and 800TTJ.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's. 500TTJ and 800TTJ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's. 1000ETJ, 1000TR, 1000TRQ, 1500TR. • Model No. ADT5Technical Specification:Capacity: 1000kgCompatibility: 500TTJ and 800TTJ.Nett Weight: 23.69kgDimensions: Length: 315mm x Height: 350mmWeight: 24.6KgWarranty: 1 year
from £272.95 up to £314.54 
Compare prices and buy Sealey Adjustable Gearbox Support 1000kg Capacity for 500TTJ and 800TTJ
£273.00
£273.00
£293.00
£315.00
Compare prices4
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height