Car Jacks

Lightweight and fast lift, ideal for bodyshops, tyre bays etc. Supplied with 75mm removable support cup.Min height 115mm, max height 430mm. Working pressure: 8 bar, lifting time 3 seconds, pressure blow off valve. To be used in conjunction with axle stands.

The Clarke CTJ1500QULP combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars making it ideal for motor sports and mobile operators.

Protective Rubber Pad for trolley jack 1pcs designed for BMW models Jack Pad Size: 71 x 25mm Made of high quality rubber, will not damage the vehicle. Intended for BMW | Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

0.2 kg

The SIP 12 Ton Bottle Jack is compact and powerful, and features a built-in safety valve, screw extension for adjustable lifting heights, and a serrated saddle to give secure load contact. 12 Ton maximum weight capacity 210mm to 415mm lift height range 60mm screw extension is included Serrated saddle for secure contact Durable and powerful construction Compact and very lightweight Reliable overload protections Heavy-duty cast iron base Integrated safety valve

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

This durable 3 Tonne jack is specifically designed for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors and a wide footprint for stability.- Lifting Capacity: 3 Tonnes- Extra strong long 2 piece handle- Saddle height: Min 136mm. Max 465mm- Dimensions (LWH): 572 x 328 x 175mm- Weight: 28.3PTDCLA7623032

GREY machine jack, max. load 7 t, 2+ items. Supplied = assembled. Max. load = 7 t. Lifting range with lifting head = 65 - 420 mm. Lift = 355 mm. Weight = 53 kg. Product type = hydraulic jacks. Sturdy steel construction for a variety of applications. Hydraulic system is protected by overload pressure valve. Finely controlled discharge valve for precise lowering. The hydraulic GREY machine jack is made of high quality steel and extremely robust. It has a max. load of 4 or 7 tonnes, can lift vehicles and machinery without difficulty and is therefore highly versatile. Its compact design provides stability and, together with the long pump lever, needs little effort to operate.

The JCB-TH33013 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 3 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH33013 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 505mm in height.The JCB-TH33013’s chassis utilises an extra low-profile design, which allows the trolley jack to reach lower clearances, particularly useful for sports cars or vehicles with reduced ground clearance.Thanks to its integrated double-piston mechanism, the JCB-TH33013 is a quick-lift trolley jack, which will save you precious time an…

Screw adjustment with easy-to-use spinner nut and ball bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range.

This 30 Tonne Bottle Jack is fully tested and fitted with an overload valve to comply with the latest CE directives, whilst the cast base with threaded components allows for easy disassembly.

Air/Hydraulic bottle jack capable of both air assisted or manual operation. Fitted with safety overload valve and manufactured in the EU. All steel one-piece base reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90° rotating pump and telescopic pump handle and has moulded carry handles incorporating storage for the pump handle. Service kit readily available.30 Tonne Bottle Jack Manual/Air Hydraulic• Min./Max. Height: 242/455mm.• Air assisted or manual operation. • Safety overload valve.• All steel one-piece base reservoir and pump cylinder.• Telescopic pump handle.• 90° Rotating pump.• Moulded carry

Bottle jack, with hydraulic unit, max. load 12 t. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Overall height from - to = 215 - 400 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Seal Repair Kit for ZT1120454X by Kennedy