Car Jacks

• Manufactured from strong, durable powder coated steel.• Provides safe and easy ramp access for in-line and multi axle vehicles.• Suitable for loading/unloading motorbikes, quads, ride-on lawn mower and mini tractors from vans or trailers.• Features a chain and hook to help secure ramps while in use.• Folding design allows compact storage when not in use.• Folded Dimensions (L x W x H): 890 x 230 x 150mm.• Extended Dimensions (L x W x H): 2000 x 230 x 50mm.• Maximum load 250kg single ramp or 500kg per pair.Manufactured from strong, durable powder coated steel. Provides safe and easy ramp access for in-line and multi axle vehicles. Suitable for loading/unloading motorbikes, quads, ride-on lawnmow…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

• Adapter suitable for all farm jacks.• For use on Land Rover Defenders with jacking point tube.Adapter suitable for all farm jacks so the jack can be used on Land Rover Defenders with jacking point tubes.Technical Specification:Nett Weight: 1.36kgDimensions: Length: 60mm x Height: 90mmWeight: 1.4KgWarranty: 1 year

• Heavy-duty 6 Tonne axle stands.• Sturdy welded steel construction for superior safety and strength.• Supplied with captive pin load support.• Range available in five different colours.• Sold in pairs.• 2 Year guarantee*.Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutches for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support. Sold in pairs.• Min./Max. Working Height: 369/571mm. • Capacity: 12tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • Range available in five different colours. • Sold in pairs. • 2 …

The Master Lock Carry Strap No. 3126EURDAT features a 2.5m long x 25mm and 5.5m long x 25mm crossed straps with zamac buckles. They are a readymade carrying solution with a strap and an integrated handle.They are ideal to carry cartons or pieces of furniture, the metal cam buckle enables you to adjust the length of the strap. The two handles with foam finish make the use even more comfortable. Colour: Red.Strap Width: 25mm. Additional Information:• Length: 2.5 & 5.5m• Type: Carry Strap• Load Capacity: 80kg