United Kingdom

Car Jacks

 prices on 1083 models  
Show
• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…
from £78.95 up to £101.95 
Compare prices and buy Sealey Beam Clamp 2tonne
£79.00
£79.00
£82.00
£102.00
Compare prices4
High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …
£149.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Loading support for semi-trailers, max. load 30 t, contact surface Ø 200 mm. Supplied = assembled. Max. load = 30 t. Contact surface = Ø 200 mm. Adjustment range = 1000 - 1300 mm. Product type = uprights. High max. load due to steel construction. Chassis provides easy, fast positioning. Ball bearing base plate. The new Trailer Jack has greatly advanced the safety of semi-trailers and containers when being loaded and unloaded. The telescope loading prevents uncoupled trailers from tipping while being loaded by pallet trucks or due to load changes. This is positioned like a leg below the front edge or the suspension area of semi-trailers or containers.
£2,460.00
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
Specification: 8 ton (16,000 lbs) capacity with a 6.69" minimum lift height and 16.94" maximum lift height Double Ram: Features lower minimum lift height and higher maximum lift height than common bottle jacks. Suitable for wider variety of vehicles including trucks and SUVs Extension Screw Top: Adjust the screw before actually stroking the pump, saving time and effort High Quality Hydraulic Oil: Filled with unique hydraulic oil, which provides great corrosion resistance and -13 °F – 140 °F operation temperature flexibility Warranty: Includes 1-year limited manufacturer warranty
£50.38
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Twin-piston, quick lift facility - just six pumps to reach maximum height
Lifting range 100-465mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty
from £183.98 up to £204.45 
Compare prices and buy Draper 13929 Aluminium and Steel Racing Trolley Jack 25 Tonne
£184.00
£204.00
Compare prices2
The Sip 20 Ton Bottle Jack Offers Powerful Adjustable Lifting Up To 470Mm Via A Serrated Saddle For Secure Contact And 60Mm Screw Extension Plus A Heavy-Duty Cast Iron Build With Safety Valve. • 20 Ton Maximum Weight Capacity • 242Mm To 470Mm Adjustable Lifting Range • 60Mm Screw Extension For Added Versatility • Serrated Saddle For Safe Secure Load Contact • Compact And Lightweight Design Despite The Heavy-Duty Cast Iron Construction And Base • Overload Protection And Safety Valve • Ideal For Workshops And GaragesPTDSIP03660
£68.72
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…
from £49.95 up to £64.86 
Compare prices and buy Sealey Car Ramps Low Profile 1.5tonne Capacity per Ramp 3tonne Capacity pe
£50.00
£59.00
£65.00
Compare prices3
Lifter, with hydraulic unit, type V5, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 252 - 392 mm. Lifting range with lifting toe = 15 - 165 mm. Lift = 140 mm. Max. load with lifting head = 5 t. Max. load with lifting toe = 5 t. Weight = 21 kg. Product type = hydraulic jacks. Can also be used where space is tight due to the compact design. High quality, compact steel construction. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations, for the workshop or for outdoor use - the high quality materials mean this lifting device can be used everywhere …
£1,834.80
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
Screw adjustment with easy-to-use spinner nut and ball-bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range. Features & Benefits: • Screw adjustment with spinner nut. • Ball-bearing thrust race. • Removable base. • Min./Max. Height: 1364/2032mm. • Model No. ES750 Specifications: Model No ES750 Brand: Sealey Capacity: 750kg Maximum Height: 2032mm Minimum Height: 1364mm Nett Weight: 12.78kg
from £170.95 up to £199.34 
Compare prices and buy Sealey Exhaust Support Stand 750kg ES750
£171.00
£171.00
£199.00
Compare prices3
Bottle jack, with hydraulic unit, max. load 2 t, 4+ items. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Overall height from - to = 158 - 298 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£51.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.
£73.67
Electricalworld.com
Delivery: in United Kingdom
Report
Buy!
Electricalworld.com
Spare Parts for Kennedy Bottle Jacks
£4.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
VEVOR Floor Jack, 2.5 Ton Low Profile Floor Jack, Aluminum And Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 95 mm-475 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingConvenient ArmrestsHandle Length: 45"/1145 mm,Product Size (L x W x H): 28x12.6x5.9(inch)/710x320x150(mm),Lift Weight Capacity: 5500 LBS/2.5 Tons,Model: QJD-LTD025A-00,Product Weight: 60.5 lb/27.45 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 18-7/10"/475 mm,Material: Aluminum + Steel,Tray Diameter: Φ4-7/10"/119 mm,Minimum Height: 3-3/4"/95 mm
£155.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
Info Governance Engine Up To 10 Devices
£1,039.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The Draper PJ40LC is a long chassis, extra low profile pneumatic jack that is capable of lifting 40 tonnes, with a 125mm entry height that has a total reach of 2210mm. This jack is supplied with 45mm and 75mm height lift extensions which provide a maximum height of 302mm at stage 1, 347mm at stage 2 and 396mm at stage 3. You can use this product easily and safely thanks to its three stage adjustable ergonomic handle, equipped with a “Slow Down” valve and a “Self-Return” switch. To further help your use of this device, and to increase its manoeuvrability, this jack is fitted with twin rubber-coated wheels which also provide a quieter and smoother operation, as well as
£1,499.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable
from £7.52 up to £8.95 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type C V4
£8.00
£9.00
Compare prices2
Low profile car jack 2.5T 80-360 mm BEST 10663 ✅ Capacity: 2.5 tons | ✅Low profile: 80mm | ✅ Length: 540 mm I ✅ Height with lowered arm (measured from the plate): 8 cmI ✅ Flooded with hydraulic oil Rating of our customers⭐️⭐️⭐️⭐️⭐️ ⭐️ Features of the lift ✔️ The lift allows you to lift an object weighing up to 2500 kg. ✔️ Perfect for a home garage as well as a professional workshop. ✔️ Perfect for sports cars with low suspension due to the low profile. ✔️Height of the tool with the arm lowered (measured from the plate) is 8 cm ✔️ The lift has wheels, making it more comfortable to use. Rear fixed, front swivel bearings ✔️ The construction of the device is reinforced with brackets, which translate…
£177.03
Joom.com
Delivery: in United Kingdom
Report
Buy!
Joom.com
• Heavy-duty trailer jack with swivel mounting.• Suitable for handling trailers with heavy nose weight.• Integral swivel weld-on mounting.• Min./Max. Height: 230/480mm.Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.• Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm • Model No. TB373Technical Specification:Capacity: 900kgMaximum Height: 480mmMinimum Height: 230mmNett Weight: 4.62kgDimensions: Length: 253mm x Height: 125mmWeight: 5.136KgWarranty: 1 year
from £43.95 up to £49.99 
Compare prices and buy Sealey Trailer Jack with Weld-On Swivel Mount 250mm Travel - 900kg Capacit
£44.00
£44.00
£47.00
£48.00
£50.00
Compare prices5
The EVOcrk is a professional quick-lift hydraulic jack designed for rally car use. Weighing only 3.5kg the EVOcrk folds up to a compact package when not in use so can easily be stored in the rally car.Operation of the jack is simple, an adjustable height 22mm diameter pin inserts into a tube on the car body. Pump the handle and the car lifts, it takes only 9/10 strokes to reach the full height of 610mm. The base of the jack is made from a durable polymer with a grippy rubber sole so it provides support and grip on most surfaces. The base also swivels to account for the jack angle changing as the car is raised or lowered.  Technical Specifications Base Adjustable for extra
£753.34
Demon-tweeks.com
Delivery: in United Kingdom
Report
Buy!
Demon-tweeks.com
Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £32.95 up to £42.59 
Compare prices and buy Draper Wide Load Sling, 4m x 120mm, 4 Tonne
£33.00
£33.00
£43.00
Compare prices3
Spare Parts to suit Kennedy Trolley Jacks
£4.29
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1.5 metre
from £9.95
Compare prices and buy Sirius Round Lifting Strap Reinforced Sling 1.5m 1000kg LS500-0103
£10.00
£10.00
Compare prices2
Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.PTDDRPDIR41737
£5.68
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size ø137.5mm. Fits saddle ø116-123mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø137.5mm. • Fits saddle ø116-123mm. • Model No. JP06Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø137.5mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø116-123mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.284KgWarranty: Consumable
from £7.52 up to £9.29 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type A V3
£8.00
£9.00
£9.00
Compare prices3
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height