Car Jacks

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1.5 metre

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size ø137.5mm. Fits saddle ø116-123mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø137.5mm. • Fits saddle ø116-123mm. • Model No. JP06Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø137.5mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø116-123mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.284KgWarranty: Consumable

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable

Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

• Manufactured from 3.5mm steel section.• Suitable for professional or serious DIY applications.• Corrosion resistant finish.• Ramps stack together and will stand upright for easy storage.• BS Approved.Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.• 2tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000Technical Specification:Capacity Pair: 2000kgMaximum Tyre Width…

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 8 TonneHydraulic Lift: 145mmMaximum Height: 447mmMinimum Height: 222mmNett Weight: 5.00kgScrew Extension: 80mmTechnical Specification:Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mmDimensions: Length: 132mm x Height: 230mmWeight: 5.214KgWarranty: 3 years

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.