Car Jacks

• LOW ENTRY LIFTING RANGE - Minimum saddle height 85mm, maximum saddle height 385mm.• PROFILED LIFTING ARM - Allows low clearance height making this unit suitable for sports and custom cars.• ONE PIECE HYDRAULIC UNIT - Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.• WHITE SADDLE - Aids positioning under vehicle and safety valve prevents overloading.• HEAVY DUTY CHASSIS - Has strengthening flanges along the top edge for extra torsional rigidity under load.Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85…

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

• Single nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Fitted with eye bolt for rope or chain.Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne.• Single nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Fitted with eye bolt for rope or chain. • Suitable for vehicles below 10tonne. • Model No. WC03Technical Sp…

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

• Interlocking plastic dollies can be linked lengthways or sideways to allow the user to create the platform they need to move large or heavy items around the workplace with ease.• Each dolly can hold up to 150kg of evenly spread weight.• Injection mould plastic features non-slip pads which prevent load from slipping.• The design of the dolly also allows for these to be stacked safely on top of each other (maximum ten high) when not in use.• They also feature built-in carry handles to aid transportation and 75mm TPR double ball-bearing castors for manoeuvrability.• Overall Size (W x D x H): 605 x 400 x 120mm.Interlocking plastic dollies can be linked lengthways or sideways to allow the user to …

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

• Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg.• Easy manoeuvring around the workshop or garage.• Front and rear lever operated wedge gates allow for easy loading and unloading. • 5-Position side stand platform to fit varied length side stands.• Features front/rear steel pins, to keep the motorcycle on the dolly during moving, and smooth-rolling dual castor wheels.• Overall Dimensions (L x W x H): 2120 x 770 x 90mm.• Loading Track Dimensions (L x W x H): 2000 x 200 x 50mm.Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg. Easy to manoeuvre around the workshop or garage. Front and rear lever operated wedge gates allow for easy…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.