Car Jacks

Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle. Features & Benefits: • Fitted with overload valve. • Dual-stage rams allow for longer travel. • Stage 1 capacity 7500kg. • Stage 2 capacity 4000kg. • Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle. • Model No. SJ4T Specifications: Model No SJT4 Brand: Sealey Capacity: 4 Tonne Hydraulic Lift: 170mm Maximum Height: 390mm Minimum Height: 160mm Nett Weight: 6.4…

Fully certified and approved to comply with MOT requirements. Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets MOT recommendation for lifting on jacking point. Features & Benefits: • Fully certified and approved to comply with MOT requirements. • 1.6m Load arm reach. • Beam Lift: 95-300mm. • 2-Stage mechanical safety lock and…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 3m x 120mm, 4 Tonne

Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle. Features & Benefits: • Optional fork cradle support for front paddock stands. • Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. • Yellow phosphate finish for added corrosion resistance. • For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle. • Model No. FPSFC Specifications: Model No F…

Replacement hydraulic ram for PH20.V4 engine crane. Features & Benefits: • Replacement hydraulic ram for PH20.V4 engine crane. • Model No. PH20.V4-E Specifications: Model No PH20.V4-E Brand: Sealey Nett Weight: 11.8kg Ram Capacity: 8000kg Ram Diameter: 33.9mm Ram Travel: 502mm Pump Type: Single Speed Ram Pin Hole Diameter: 16.4mm Clevis Pin Hole Diameter: 16.4mm Mounting Point Distance (Min.): 636mm Overall Length (Min.): 670mm Base mount Type: Double Clevis

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Features & Benefits: • Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. • Low profile afforded by integral pivot/lifting point. • Model No. BC2000 Specifications: Model No BC2000 Adjustable Beam Width: 75-220mm Brand: Sealey Capacity: 2000kg Dimensions: (A) - 26…

All steel construction with bolted height adjustment. Ideal for long term motorcycle storage. Sold in pairs. Features & Benefits: • All steel construction with bolted height adjustment. • Ideal for long term motorcycle storage. • Sold in pairs. • Model No. SAS01 Specifications: Model No SAS01 Brand: Sealey Nett Weight: 2.04kg Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mm

Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle and fitted with carrying handle. Features & Benefits: • Min./Max. Height: 180/385mm. • Telescopic hydraulic ram allows a reduced closed height. • Carrying handle. • Made in EU. • Safety overload valve. • One-piece steel base, reservoir and pump cylinder. • Zinc coated handle. • 3 Year Guarantee*. • Model No. PTBJ20 Specifications: Model No PTBJ20 Brand: Premier Capacity: 20 Tonne Hydraulic Lift: 205mm Maximum Height: 385mm Minimum Heig…

Accepts a wide variety of engines and transmissions. Heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Features folding legs for easier storage and transport. Maximum Load Length: 700mm. Features & Benefits: • Size (W x L x H): 820 x 1105 x 910mm. • Head swivels through 360°. • Fully adjustable mounting arms. • Swivel castors. • Foldable legs. • Maximum Load Length: 700mm. • Model No. ES900F Specifications: Model No ES900F Brand: Sealey Capacity: 900kg Nett Weight: 45.00kg Size (W x D x H): 1105 x 820 x 910mm