Car Jacks

Effective – versatile jack includes tools to lift, pump, and maintain car tyres in the event of a breakdown + LED lamp
Compact – car jack with practical carrying case for easy transportation
Powerful – hydraulic jack lifts a 5 t load to a height of 45 cm, incl. air pump with 35 l/min air flow
Exhaustive – incl. Safety hammer, inflation valves/adapters, spare fuses, and hex key.
Durable – made from high-quality materials

• IDEAL FOR 4x4 VEHICLES - Clever device which quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials.• EASY-TO-USE - Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor (30mm spigot pin) and you are ready to lift.• SIZE - Minimum/Maximum Height: 140/230mm.• SUITABLE FOR - Jacks with a 31-33mm saddle spigot pin, including Model No's 3000CXD and 3010CX.*Note: Remove any rubber jack pad from the saddle before using to improve safety.Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace…

• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Overall Size: ø630mm x 760mm.Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys. • Overall Size: ø630mm x 760mm. • Model No. STR.CTechnical Specification:Nett Weight: 0.00kgSize: ø630mm x 760mmDimensions: Length: 209mm x Height: 34mmWeight: 0.164KgWarranty: 1 year

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Also includes mechanical load brake for extra safety. • Al…

• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Includes mechanical load brake for extra safety. • Al…

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

• Manufactured from 3.5mm steel section.• Suitable for professional or serious DIY applications.• Corrosion resistant finish.• Ramps stack together and will stand upright for easy storage.• BS Approved.Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.• 2tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000Technical Specification:Capacity Pair: 2000kgMaximum Tyre Width…

• Manufactured from durable polypropylene.• Suitable for professional or serious DIY applications.Manufactured from durable polypropylene. Suitable for professional or serious DIY applications.• 3tonne Capacity per pair. • Manufactured from durable polypropylene. • Suitable for professional or serious DIY applications. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000CTechnical Specification:Capacity Pair: 3000kgMaximum Tyre Width: 260mmNett Weight: 0.00kgOverall Dimensions (L x W x H): 900 x 300 x 215mmRamp Height: 160mmDimensions: Length: 330mm x Height: 315mmWeight: 9.76KgWarranty: 1 year

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

This Carpoint scissor jack is a compact, mechanical car jack with a maximum load capacity of 1500 kg Features: You can easily carry it along for emergencies on the road The sturdy lifting mechanism is easy to operate with the included crank handle It also adjusts the lifting height between 90 and 380 mm Specifications: Dimensions: H: cm Model Number: 439321

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…