UPS Batteries

Quality and convenience
An original APC Battery Replacement Cartridge offers safety quality convenience and is hot swappable. This means that the battery cartridge can easily be replaced by the user without turning off the UPS or bringing down the load.

Complete
This APC Battery Replacement Cartridge is ready-made equipped with connectors and replaces the entire old cartridge in its entirety.

Application
APC Battery Replacement Cartridge RBC43 is used in the SMT2200RMi2U SMT3000RMI2U SUA2200RMI2U SUA3000RMI2U SUM1500RMXLI2U SUM3000RMXLI2U DLA2200RMI2U SUM48RMXLBP2U DLA3000RMI2U among others.

Warranty
2 years

Hot-swappable batteries
Ensures clean uninterrupted power to protected equipment while batteries are being replaced

Plug-and-Play external batteries
Ensures clean uninterrupted power to the loads when adding extra runtime to the UPS.

APC (RBC34) APC RBC34 UPS battery Sealed Lead Acid (VRLA)...

Hot-swappable batteries
Ensures clean uninterrupted power to protected equipment while batteries are being replaced

Plug-and-Play external batteries
Ensures clean uninterrupted power to the loads when adding extra runtime to the UPS.

Green Cell (AGM17) Green Cell AGM17 UPS battery Sealed Lead Acid (VRLA) 12 V 1.2 Ah...

Eaton 9SX extended battery module (EBM) used with Eaton 9SX 1500IR UPS.

Eaton 5PXEBM48RT2UG2 UPS battery Sealed Lead Acid (VRLA) 12 V 9 Ah

Tripp Lite WEBCARDLX WEBCARDLX Network Card for Select UPS Systems and PDUs

V7 UPS Replacement Battery for UPS1DT750

Digitus UPS External Battery Pack for 1,5kVA UPS Model (Extended Pack)

V7's high quality replacement UPS batteries are made from the highest quality cells available. They incorporate all of the standard logic boards thermal protectors thermistors and circuit breakers to ensure maximum safety reliability and efficiency. V7's wide selection is fully compatible with UPS products from major manufacturers and meets or exceeds original OEM specifications to provide long lasting quality.

V7 UPS Battery, RBC6 Replacement Battery, APC RBC6

V7 UPS Battery, RBC55 Replacement Battery, APC RBC55

V7 UPS Battery, RBC140 Replacement Battery, APC APCRBC140

Argo Fet 100A - 1E/2S Load Distributor.

Tripp Lite TLNETCARD SNMP/Web/Modbus Management Accessory Card for Compatible UPS Systems

APC SYBTU2-PLP UPS battery Sealed Lead Acid (VRLA) 9 Ah

APC SYBTU1-PLP UPS battery Sealed Lead Acid (VRLA)

APC SRVRK2 UPS accessory

APC SRTRK4 UPS accessory

APC SRTRK2 UPS accessory

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current (A): 5.0
Current: …

Victron PWM-LCD & USB 20A PWM solar PWM charge controller with LCD display for tracking and configuration and USB connection.Features:Liquid crystal display.For tracking and configuration.Charging output.The battery can be prevented from over-discharging by connecting all loads to the charging output.This output will disconnect the load when the battery has discharged to a preset voltage.Some loads (especially inverters) are best connected directly to the battery, and the inverter remote control to the load output.A special interface cable may be required.please, refer to the manual.This option allows presetting the ON-time after twilight.Programmable battery charging algorithm.Pre-programmed …

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Voltage: 12 / 24 V
Current …