Car Jacks

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cm Features and Benefits • Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped …

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle. Features and Benefits • Min./Max. Height: 222/447mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle. • Model No. SJ8 Specifications Model No SJ8 Brand: Sealey Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mm Minimum Height: 222mm Nett Weight: 4.8kg Screw Extension: 80mm

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 3-piece handle. Fitted with carrying handle. Features and Benefits • Min./Max. Height: 260/420mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 3-piece handle. • Fitted with carrying handle. • Model No. SJ30 Specifications Model No SJ30 Brand: Sealey Capacity: 30 Tonne Hydraulic Lift: 160mm Maximum Height: 420mm Minimum Height: 260mm Nett Weight: 17.8kg Screw Extension: n/a

Pressed steel wheel dolly with four Ø90mm metal castors. Handles tyres with a width up to 355mm. Suitable for use in bodyshops and workshops. Features and Benefits • Two pressed steel wheel dollies. • Capacity: 454kg/dolly. • Ø90mm Metal castors. • Handles tyres with a width up to 355mm. • Suitable for use in bodyshops, workshops and car parks. • Model No. WS454 Specifications Model No WS454 Brand: Sealey Capacity Each: 454kg Castor Diameter: Ø90mm Maximum Tyre Width: 355mm Nett Weight: 17.26kg Weight Each: 9kg

Used for lifting on contoured and round lifting surfaces. Provides more access underneath the vehicle making it easier to work on. Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact. Suitable for use with SEALEY Viking 4 Tonne Jacking Beams. Features and Benefits • Used for lifting on contoured and round lifting surfaces. • Provides more access underneath the vehicle making it easier to work on. • Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact. • Suitable for use with SEALEY Viking 4 Tonne Jacking Beams. • Model No. SJBEX.A04 Specifications Model No SJBEX.A04 Brand: Viking Capacity: 4 Tonne Nett Weight: 0.84kg…

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting. Supplied in a case for easy storage in your vehicle. Features and Benefits • Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. • High quality rubber, providing a sturdy and durable point of contact. • Secure fit to vehicle, moulded to fit bespoke vehicle fitting. • Supplied in a case for easy storage in your vehicle. • Model No. JP28 Specifications Model No J…

Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. Supplied in a storage case. Suitable for Tesla models S/X/Y/3. Features and Benefits • Designed for the jacking points to protect and prevent damage to side skirts and battery. • Made from high quality rubber, providing a sturdy and durable point of contact. • Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. • Suitable for Tesla models S/X/Y/3. • Supplied in a storage case. • Model No. JPT4 Specifications Model No JPT…

Textured base provides better grip on the jacking beam. Soft surface prevents damage to the car underbody when lifted. Slot in the support block allows the car to be lifted by the sill. Manufactured from rubber, providing a sturdy and durable point of contact. Suitable for use with SEALEY Viking jacking beams. Features and Benefits • Textured base provides better grip on the jacking beam. • Soft surface prevents damage to the car underbody when lifted. • Slot in the support block allows the car to be lifted by the sill. • Manufactured from rubber, providing a sturdy and durable point of contact. • Suitable for use with SEALEY Viking jacking beams. • Model No. SJBEX.A03 Specifications Model No SJB…

• Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg.• Easy manoeuvring around the workshop or garage.• Front and rear lever operated wedge gates allow for easy loading and unloading. • 5-Position side stand platform to fit varied length side stands.• Features front/rear steel pins, to keep the motorcycle on the dolly during moving, and smooth-rolling dual castor wheels.• Overall Dimensions (L x W x H): 2120 x 770 x 90mm.• Loading Track Dimensions (L x W x H): 2000 x 200 x 50mm.Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg. Easy to manoeuvre around the workshop or garage. Front and rear lever operated wedge gates allow for easy…

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne. Features and Benefits • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 3 tonne. • Model No. WC01 Specifications Model No WC01 Applications: Suitable for vehicles below 3 Tonne Brand: Sealey Dimensions (W x D x H): 100 x 195 x 150mm Material: Rubber Nett Weight: 3.79kg Weight Each: 1.8kg

• Replacement hydraulic ram for SSC750 Engine Crane.Technical SpecificationNett Weight: 8.75kgRam Capacity: 2500kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Tyoe: Double ClevisTechnical Specification:Capacity: 2500kg Diameter: 27.85mmDimensions: Length: 127mm x Height: 130mmWeight: 9.72KgWarranty: 1 year

• Replacement hydraulic ram for PH10.V5 engine crane.Replacement hydraulic ram for PH10.V5 engine crane.• Replacement hydraulic ram for PH10.V5 engine crane. • Model No. PH10.V5-06Technical Specification:Nett Weight: 13.3kgRam Capacity: 2720kgRam Diameter: 33.88mmRam Travel: 500mmPump Type: Single SpeedRam Pin Hole Diameter: 16.6mmClevis Pin Hole Diameter: 17.3mmMounting Point Distance (Min): 630mmOverall Length (Min): 665mmBase Mount Type: Double ClevisDimensions: Length: 170mm x Height: 675mmWeight: 13.326KgWarranty: Consumable

Ratchet type axle stands with cast iron support posts. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features and Benefits • Min./Max. Working Height: 285/420mm. • Capacity: 6 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel-plate welded bases. • Sold in pairs. • Model No. VS2003 Specifications Model No VS2003 Brand: Sealey Capacity Each: 3tonne Capacity Pair: 6tonne Maximum Working Height: 420mm Minimum Working Height: 285mm Nett Weight: 6.40kg

Ratchet type axle stands with cast iron support posts and tough steel plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features and Benefits • Min./Max. Working Height: 275/415mm. • Capacity: 4 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel plate welded bases. • Sold in pairs. • Model No. VS2002 Specifications Model No VS2002 Brand: Sealey Capacity Each: 2 Tonne Capacity Pair: 4 Tonne Maximum Working Height: 415mm Minimum Working Height: 275mm Nett Weight: 5.1kg

• Min./Max. Height: 300/410mm.• Maximum Capacity: 150kg.• Powder coated pressed steel frame, to ensure strength and durability.• Ideal for use with off-road/trials bikes to easily lift the bike when needing to perform maintenance/servicing or cleaning.• Simple, one foot, step and lift mechanism means the bike can be instantly raised in one motion.• For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to prevent accidental lowering.• Also fitted with hydraulic dampener for controlled descent.Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike when needing …

• Freestanding wheel storage trolley for all types of car wheels.• Stores wheels with rims up to 225mm.• Rack has four locking castors for easy manoeuvring.• Eliminates tyre distortion due to loss of tyre pressure.• Easy to assemble.• Supplied with rim protecting supports.• Overall Size (W x D x H): 460 x 460 x 1160mm.• Maximum Weight Capacity: 100kg (25kg per Level).Completely freestanding wheel storage trolley for all types of wheels with rim size up to ø225mm. Easy to assemble. The rack has four locking castors for easy manoeuvring around the garage. Eliminates tyre distortion due to loss of tyre pressure. Supplied with rim protecting supports.• Freestanding wheel storage trolley for all ty…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Weight-for-weight, this strap is three to five times stronger than chains and has the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Attaches to the existing pronged saddle, fitted to our TR, ETJ and TRQ model transmission jacks. This plate will assist in working on fuel tanks, sub frames, transmissions and many other tasks. The chemical resistant rubber pad protects the point of contact. Supplied with four eyelets to fasten down the load onto the plate. Powder Painted to create a durable and rust resistant finish. Features and Benefits • Attaches to the existing pronged saddle, fitted to our TR, ETJ and TRQ model transmission jacks. • This plate will assist in working on fuel tanks, sub frames, transmissions and many other tasks. • The chemical resistant rubber pad protects the point of contact. • Supplied with four eye…

Comprises essential equipment required to safely jack up a vehicle. Includes a 2 Tonne trolley jack, a pair of folding wheel chocks, a pair of axle stands (4 Tonne combined), six wheeled padded creeper for comfort whilst carrying out maintenance and L-bar wrench with 17/19mm socket. Features and Benefits • 2 Tonne trolley jack with short wheel base has a lifting range of 130mm to 330mm. • 2 Tonne axle stands (x2) have a combined weight capacity of 4 Tonne (Min./Max. Working Height: 278/366mm). • Padded car creeper with 6 x Ø50mm castors allows for comfort whilst carrying out under car maintenance. • Folding wheel chocks (x2). • L-bar wrench with 17 and 19mm socket. • Model No. JKIT01 Speci…

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting. Supplied in a case for easy storage in your vehicle. Features and Benefits • Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. • High quality rubber, providing a sturdy and durable point of contact. • Secure fit to vehicle, moulded to fit bespoke vehicle fitting. • Supplied in a case for easy storage in your vehicle. • Model No. JP27 Specifications Model No J…