Effects Pedals

When running a pedal board with more than one or two effects, something called “capacitance” happens. This natural problem happens due to the amount of cable or line that your signal has to travel through, not to mention bad switching systems in certain pedals. The result is a very audible amount of high-end loss, weak signal, flabby bass and uncharacteristic pickup behavior in guitars. Another problem is the assumption that all “true bypass” is good. This isn’t true and actually can be worse than imagined. This is where the “Little Black Buffer” steps in providing the perfect input impedance to your rig and giving you the final result of clear, natural …

Modelling guitar effect processor pedal from StompLab series with 103 modelled amps and effects, that provides high-quality sound and look. It offers a total of 100 preset program patches that are categorized by style (rock, blues, ballad, pop, metal…), and easy-to-use interface that provides instant access to the sounds that are wanted. Each effect model boasts a sound engine that has been distilled from the VT+ series of modelling amps and ToneLab series of multi-effect units, and up to 8 of them can be used simultaneously. Processor allows for editing and saving 20 of user programs. Device is also equipped with built-in tuner and headphone amp, 1/4" analog input and output. Pedal can be po…

The Tone Capture GTR pedal is based on Mooer’s unique EQ matching, non-linear IR technology, 'Tone Capture'. This pedal allows you to capture any guitar’s tone by sampling the unique tonal characteristics of the target guitar. This is achieved by comparing the differences between the guitar you want to use ('Source') and the guitar you want it to sound like ('Target'). A complex calculation then ensues and an uncanny digital recreation of your 'Target' guitar tone is born. The days of lugging around multiple guitars are over. The Tone Capture Guitar pedal opens up a variety of guitar sounds without the need to carry several guitars.
metal housing
6.3 mm mono in / output jacks
power …

Delay

Three piano-style pedals for the same kind of functional sustain, sostenuto and soft control found on grand pianos. Suitable for P-85, P-95, P-105 and P-115.
Compatible with: Yamaha P-85;Yamaha P-115;Yamaha P-95;Yamaha P-105
Colour: Black

Pedal Tuner / Calibration Range 435 - 445 Hz / Precision 0.02

The Art CoolSwitchPro Isolated A/B-Y Switch is an extremely useful tool that allows you to connect your instrument to two sources simultaneously or one at a time. Expertly designed the CoolSwitch Pro has an array of clever features that ensure your signal will never be compromised. A switchable phase inverter ensures your signal reaches the two sources at the exact same time for perfect phase alignment. The switchable ground lift and transformer isolator effectively eliminate hum even in the noisiest of rooms. A hardwired thru jack lets you connect in parallel to another piece of equipment such as a tuner for your guitar. An ideal solution for guitarists bass players or synth players you can …

includes cable, expression and volume pedal for Korg keyboards and synths
Made in: Japan

Distortion effect pedal for guitar that features classic BOSS distortion tones with added twin Turbo modes for an expanded range of the effect. Turbo Mode I produces warm and mellow distortion with flat frequency response, Turbo Mode II provides biting distortion with a mid-range boost and is perfect for leads. Pedal also features built-in remote jack connector that allows connection of an external footswitch for hands-free switching between the modes, standard jack input and output, and jack for AC adaptor (not included). Pedal can be powered by 9 V battery or optional AC adaptor. Input impedance: 1 MOhm. Output impedance: >10 kOhm. Equivalent input noise level: -120 dBu or less. Dimensions: …

Multi-power supply for effect pedals. 8 Outputs for 2.5 mm x 5.5 mm barrel plug. polarity (-) center. 1 x adjustable voltage (9V, 12V, 15V, 18V) @ 200 mA. 3 x independent 9V @ 200 mA each. 4 x parallel 9V @ 400 mA combined. Selectable AC voltage (110V~120V and 220V~240V) for usage in different regions. Includes fuses for both types of voltage. Status LED for each output. Over-current protection function. Dimensions: (L x W x H) 165 mm x 83 mm x 52 mm. Weight: 1.12 kg
UK/EU Power supply included: No
Power Supply: 240V
Battery Operation: No
Made in: China

Pedal unit for Yamaha P-125WH. It contains sustain pedal, sostenuto and soft pedal. Color: White
Made in: Indonesia

Sustain footswitch pedal for use with digital pianos, keyboards, synthesizers, and stage pianos that offers a feel close to that of the pedal on an acoustic piano. It features a rubber underside that prevents it from slipping when used in piano/keyboard performances, allowing the performer to immerse themselves in playing. It is compatible with assignable switch functions, allowing the player to call up the desired function or setting just by depressing the pedal.
Made in: Indonesia
Type: Sustain Pedal
Type-A Connector: Jack MONO 6,3 mm Male
Cable Length: 1,5 m
Colour: Black
Original Colour by Producer: Black;Black
Polarity Switch: No

C0-C8 range (16.35Hz-4.186kHz), also for 7-string guitar and 6 string bass, 436-445Hz accuracy, high brightness mode, Accu Pitch, flat tuning, +/- 1 cent accuracy, mute/bypass, powered via 9V battery (included), optional power supply (Boss PSA-230 or PSB-230), dimensions: 7.3 x 5.9 x 12.9cm. Weight: 390g
Battery Type: 9V
Battery Detail: Al/Mn
Battery Operation: Yes
Package Contents: Battery
Made in: Taiwan
Frequency Band: 436 - 445 Hz
Variant: Standard offer
Type: Pedal
UK/EU Power supply included: No

Compact guitar pedal effect – looper that is very intuitive and was designed by guitarists for guitarists. It is equipped with one knob button that allows usage of all the functions (record, undo/redo, stop and erase) via different food-commands: press once to record, press again to play the loop, and once again to add another layer; press and hold to Undo a layer and press and hold again to Redo; press twice to stop, and after that press and hold to clear the loop. All loops are produced in 24-bit uncompressed high quality audio. Looper provides 5 minutes of looping time and unlimited overdubs, and has ultra-small footprint and fits any pedal board. It also allows the “dry sound” to pass withou…

Fender’s Tone Master® Pro Gig Bag is a stylish and affordable way to keep your Tone Master Pro safe while traveling. Its durable outer layer is constructed of tough 600 Denier polyester that protects against impacts while avoiding ripping and tearing. The interior features 10mm padded rigid foam with two dividers to accommodate expression pedals or other gear. Dual storage pockets in the lid make hauling around small items like cables and accessories a breeze. The Tone Master® Pro Gig Bag also includes a shoulder strap for easy transportation.
Made in: China
Compatible with: Fender Tone Master Pro
Weight: 2,35 kg
Padding: 10 mm
Material: 600D Polyester
Original Colour by Producer: Black
Height (cm)…

Microlog 2 is designed to fit neatly into a pedal-board and can be used alternatively as a stand-alone unit. Pocket-sized it may be but it doesn't have a pocket-sized sound as it's built to precisely the same quality as all our instruments. At a mere 215 grams and featuring similar dimensions to a standard size overdrive or chorus pedal it won't weigh you down.
UK/EU Power supply included: No
Made in: China

Make sure your bass is heard. Loud and Proud. The Electro Harmonix Nano Bass Big Muff Pi Distortion Sustainer is a real workhorse. Ideal for rock metal and indie genres. Employing this to your pedal board adds a great deal of harmonics to your tone. Guaranteeing youll cut through the densest of mixes. Although small in size. The Nano retains the sound quality of its big brother. Youll have the exact same tonal shaping rich tonal shaping and power in a pedal-board friendly size. Take your tone to the next level with the Electro Harmonix Nano Bass Big Muff Pi Distortion Sustainer.

The Logjam Travelog Stomper is a fun and compact electro-acoustic foot percussion instrument. The perfect accompaniment for guitarists and other performing musicians the Travelog gives you all the power and energy of a bass drum in a super lightweight and portable package.

Octaver effects pedal for electric guitar that delivers all of the polyphonic octave pleasantries that you know from its bigger brother - Sub 'N' Up - and sounds huge but looks tiny. It is equipped with next generation octave engine for flawless polyphonic tracking, but it can still be turned into an old school monophonic octaver for that crackling pitch glitch of the olden days. If you are into a more modern sound and feel, the polyphonic octave algorithm keeps all the notes tracking true even when playing chords and harmonies or laying down the bottom pitch. Focusing on simplicity and ease of use, it provides a mini toggle switch and the two octaves down knob. The pedal also allows for tapping …

The Mooer Groove Loop brings together both the Micro Looper and Micro Drummer into one micro pedal, for the ultimate jamming companion. Both elements can be used independently from one and other or simultaneously. When used simultaneously the looper will be automatically synchronised to keep in time with the drum groove you’ve selected and an intro click will be played when recording the first loop to ensure you’re in time with the groove. The tap tempo button makes adjusting the groove speed very easy and independent playback level controls for both the Drums and the Looper ensure Groove Loop is a breeze to dial in and adjust on the fly.
metal housing
6.3 mm mono in/output
power …

High-impedance volume pedal that is designed to be connected before guitar effect units in the signal chain, providing two inputs and two outputs. Convenient tuner output enables speedy tuning on stage, while the Minimum Volume knob allows user to set minimum volume as desired. Dimensions: 86 x 200 x 54 mm. Weight: 400 g.
Power Supply: Passive
Battery Operation: No
UK/EU Power supply included: No
Type: Volume
Made in: China

Foot pedal, two-position with half-pedal function, suitable for CP33, P250, P70, S90ES, P85, P120, P140, P90, CP300, MOTIFXS.
Made in: Indonesia
Original Colour by Producer: Black;Black
Compatible with: P45;P70;CP33;CP300;P85;P60;P-90;P140;P120;P250
Type: Half Damper;Volume
Polarity Switch: No
Type-A Connector: TRS 6,3 mm Jack
Colour: Black
Cable Length: 1,6 m

The OCTAVE DIVIDER is an authentic recreation of the popular Octave Divider from the ‘70s. It features an earth-shaking sub-octave effect with its own MIX and TONE controls so you can blend your dry and sub-octave signal, or shape that tone to your taste while still preserving the dynamics and harmonics. The BASS ONLY switch also allows you to completely cut out the dry signal leaving only the sub-octave so you can create your own complex basslines on the fly. The OCTAVE DIVIDER brings all the amazing features from the original ‘70s design, plus a few modern ones, that are sure to fit right at home with any pedal board. The OCTAVE DIVIDER has an amazing RINGER function that adds …

Low-impedance stereo volume pedal that can be used for a wide variety of purposes including keyboards and provides two inputs and two outputs. Convenient tuner output enables speedy tuning on stage, while the Minimum Volume knob allows user to set minimum volume as desired. Dimensions: 86 x 200 x 54 mm. Weight: 400 g.
Type: Volume
UK/EU Power supply included: No
Made in: China
Battery Operation: No
Power Supply: Passive