Car Jacks

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 2m.Additional Information:• Length (m): 2• Tie Down Type: Lifting Sling• Max. Load (kg): 2000• Breaking Strength (kg): 14000

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.

• Made from high quality neoprene that is resistant to grease, water, ozone, abrasion and extremes of temperature.• Supplied with fitting kit including clips and grease sachet.• Joint ø: 80-104mm.• Length: 90mm.Made from high quality neoprene that is resistant to grease, water, ozone, abrasion and extremes of temperature. Supplied with fitting kit including clips and grease sachet.• Made from high quality neoprene that is resistant to grease, water, ozone, abrasion and extremes of temperature. • Supplied with fitting kit including clips and grease sachet. • Joint ø: 80-104mm. • Length: 90mm. • Model No. DBC100Technical Specification:Joint Diameter: 80-104mmLength: 90mmNett Weight: 0…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Overall Size: ø630mm x 760mm.Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys. • Overall Size: ø630mm x 760mm. • Model No. STR.CTechnical Specification:Nett Weight: 0.00kgSize: ø630mm x 760mmDimensions: Length: 209mm x Height: 34mmWeight: 0.164KgWarranty: 1 year

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

This Carpoint scissor jack is a compact, mechanical car jack with a maximum load capacity of 1500 kg Features: You can easily carry it along for emergencies on the road The sturdy lifting mechanism is easy to operate with the included crank handle It also adjusts the lifting height between 90 and 380 mm Specifications: Dimensions: H: cm Model Number: 439321

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 5 AND 6 TONNE - Suitable for Sealey axle stands AS6, AS5000, AAS500 and VS2006 ranges as well as most other brands of axle stand.• HEAVY DUTY FIXINGS - Supplied with wall mounting fasteners.• SECURE - Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2.8kg

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

Equip your vehicle with the latest industry products! Buy Jack Dunlop 1500 kg and don't miss out on anything!. Max. supported weight: 1500 kg. Approx. dimensions: 10 x 6 x 42 cm