Drill Bits

Expert Quality, a selection of metric - sized high speed straight shank twist drills specifically for drilling holes prior to tapping. one drill per card (sizes 4.2 - 10.2mm) and two drills per card (sizes 1.6 - 3.3mm). Manufactured to DIN338 and ISO235/1 Specifications Features and Benefits • Expert Quality • High speed straight shank twist drills specifically for holes prior to tapping • For use with standard ISO metric threads Contents 1 x 1.6mm HSS Twist Drill for 2 x 0.4 Taps

Faithfull's Imperial HSS Jobber Drills are suitable for home users and DIY enthusiasts. High speed steel (HSS) straight shank drills that are suitable for use on both wood and metal and may be used in hand or power drills. A cutting lubricant is recommended when using these drills in metal. Manufactured to meet DIN 338 standard. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 3/8in are supplied in 10's. Larger sizes are supplied in 5's.Size.1/4in.Additional Information:• Tip Diameter (in): 45383• Pack Qty.: 10

These M35 high speed steel drill bits are manufactured with 5% cobalt for long-lasting performance, abrasion resistance and heat protection. Fully ground with a 135° split point for precise centring to prevent drill wander. For optimal results and a longer lifetime, Draper cobalt drill bits work best in conjunction with a cooling agent. Suitable for use with alloy steel, titanium alloys, stainless steel, hardened steel, cast iron and carbon steel. Compatible with a standard 10/13mm chuck. Manufactured to DIN338 and DIN1414-2Features & Benefits:• M35 high speed steel with 5% cobalt for long-lasting performance, abrasion resistance and heat protection• Fully ground with a 135° split po…

Expert Quality, a selection of metric - sized high speed straight shank twist drills specifically for drilling holes prior to tapping. one drill per card (sizes 4.2 - 10.2mm) and two drills per card (sizes 1.6 - 3.3mm). Manufactured to DIN338 and ISO235/1 Specifications Features and Benefits • Expert Quality • High speed straight shank twist drills specifically for holes prior to tapping • For use with standard ISO metric threads Contents 1 x 2.05mm HSS Twist Drill for 2.5 x 0.45 Taps

Expert Quality, metric-sized high speed steel drills (with 5% COB alt). The addition of COB alt to HSS prevents wear for longer life. Features and Benefits • Expert Quality • Metric-sized high speed steeldrills (with 5% cobalt) • The addition of cobalt prevents wear for longer life Contents 1 x HSS Cobalt Drill Bit, 3.2mm

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 6.5 mm .Additional Information:• Tip Diameter (mm): 6.5• Working Length (mm): 63• Overall Length (mm): 101• Pack Qty.: 1

Expert Quality, a selection of metric - sized high speed straight shank twist drills specifically for drilling holes prior to tapping. one drill per card (sizes 4.2 - 10.2mm) and two drills per card (sizes 1.6 - 3.3mm). Manufactured to DIN338 and ISO235/1 Specifications Features and Benefits • Expert Quality • High speed straight shank twist drills specifically for holes prior to tapping • For use with standard ISO metric threads Contents 1 x 4.2mm HSS Twist Drill for 5 x 0.8 Taps

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size.3.30mm Pack of 2Additional Information:• Tip Diameter (mm): 3.3• Working Length (mm): 36• Overall Length (mm): 65• Pack Qty.: 2

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 3.5 mm Dia. Pack of 2Additional Information:• Tip Diameter (mm): 3.5• Working Length (mm): 37• Overall Length (mm): 70• Pack Qty.: 2

Features & Benefits: • Model No. HSS8.5 Specifications: Model No HSS8.5 Brand: Sealey Size: Ø8.5 x 115mm

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.8.50mm.Additional Information:• Tip Diameter (mm): 8.5• Working Length (mm): 72• Overall Length (mm): 117• Pack Qty.: 1

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 4.5 mm x 85 mm.Additional Information:• Diameter (mm): 4.5• Working Length (mm): 85• Pack Qty.: 1

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 4 mm x 75 mm.Additional Information:• Diameter (mm): 4• Working Length (mm): 75• Pack Qty.: 1

Features & Benefits: • Model No. HSS9 Specifications: Model No HSS9 Brand: Sealey Size: Ø9 x 125mm

Expert Quality, long series HSS drill bits, manufactured to DIN 340 ISO 494 specifications. Manufactured to DIN 340 ISO 494 Specifications Features and Benefits • Expert Quality • Long Series HSS drill bits • Manufactured to DIN 340 ISO 494 specifications Contents 1 x HSS Extra Long Drill Bit, 6.5 x 148mm

For use on glass mirrors, floor tiles and quarry tiles. Must only be used with variable speed power drills. Features and Benefits • For use on glass mirrors, floor tiles and quarry tiles • Must only be used with variable speed power drills Contents 1 x Tile and Glass Drill Bit, 3mm

These M35 high speed steel drill bits are manufactured with 5% cobalt for long-lasting performance, abrasion resistance and heat protection. Fully ground with a 135° split point for precise centring to prevent drill wander. For optimal results and a longer lifetime, Draper cobalt drill bits work best in conjunction with a cooling agent. Suitable for use with alloy steel, titanium alloys, stainless steel, hardened steel, cast iron and carbon steel. Compatible with a standard 10/13mm chuck. Manufactured to DIN338 and DIN1414-2Features & Benefits:• M35 high speed steel with 5% cobalt for long-lasting performance, abrasion resistance and heat protection• Fully ground with a 135° split po…

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. The Draper Expert range is our benchmark for quality. Manufactured for the professional or for industrial use Specifications High Speed Steel Manufactured to ISO 235/1 Specifications

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 4.0 mm Dia. Pack of 2Additional Information:• Tip Diameter (mm): 4• Working Length (mm): 43• Overall Length (mm): 75• Pack Qty.: 2

Expert Quality, HSS drill bits, manufactured to DIN338 and ISO235/1 specifications. Manufactured to ISO 235/1 Specifications Features and Benefits • Expert Quality • HSS drill bits • Manufactured to DIN338 and ISO235/1 specifications Contents 1 x HSS Drill Bit, 6.5mm

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 4.2 mm Dia. Pack of 2Additional Information:• Tip Diameter (mm): 4.2• Working Length (mm): 47• Overall Length (mm): 80• Pack Qty.: 2

Features & Benefits: • Model No. HSS6 Specifications: Model No HSS6 Brand: Sealey Size: Ø6 x 90mm

Expert Quality, a selection of metric - sized high speed straight shank twist drills specifically for drilling holes prior to tapping. one drill per card (sizes 4.2 - 10.2mm) and two drills per card (sizes 1.6 - 3.3mm). Manufactured to DIN338 and ISO235/1 Specifications Features and Benefits • Expert Quality • High speed straight shank twist drills specifically for holes prior to tapping • For use with standard ISO metric threads Contents 1 x 5.0mm HSS Twist Drill for 6 x 1.0 Taps