Effects Pedals

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
UK/EU Power supply included: No
Тype: Equalizer
Made in: China
Power Supply: Adapter
Battery Operation: Yes…

Pedal Design Foot Pedal

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
Made in: China
Power Supply: Adapter
Battery Operation: Yes
UK/EU Power supply included: No
Тype: Fuzz

Analog bucket-brigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slap-back echo. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch that offers noise-free operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Тype: Echo;Delay
UK/EU Power supply included: No…

Pedal Design Foot Pedal

Vintage-style phase shifter effect pedal for electric guitar that offers an authentic, classic three dimensional phase shifting - from rapid rotary speaker to impressive jet plane effects. It provides dedicated Rate control and separate Color switch for fine-tuning of effects speed and tone, a status LED for effect on/off and battery check and a true hard-wire bypass for ultimate signal integrity. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 142 x 79 x 86 mm. Weight: 380 g.
Тype: Rotary;Phaser
Made in: China
UK/EU Power supply included: No

Pedal Design Foot Pedal

Pedal Design Foot Pedal

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Battery Detail: Al/Mn
Тype: Preamp;DI Box
Made in: China
UK/EU Power supply included: No

Pedal Design Foot Pedal

Afterglow Chorus is designed with the vintage aficionado in mind. Its all-analog circuit uses a Bucket Brigade Device (BBD) to create a wide range of classic handed-down modulation tones. From the smallest shudder to wildest wobble, this tiny marvel is sure to quench your thirst for vintage flavored chorus! From rotary speaker vibes to a full-blown 1980s chorus symphony, from jangle pop to grunge - Afterglow Chorus does it all. Plug in and send your tone on a journey through rock n' roll history! Many guitarists have grown to love the distinct tone of Bucket-Brigade circuits. And with good reason! The natural bandlimiting of this analog component is the secret-sauce found in countless classic …

TailSpin Vibrato delivers a wealth of stunning vintage vibrato tones all served in a package so affordable that it'll make your head spin. Its all-analog bucket brigade design brings everything from subtle organic wobbles to pitch-bendy warped vinyl tones and all the way to fast leslie-like sounds. These beautiful tones are housed in a compact and sturdy enclosure, ready to rock the road! Nothing beats the organic warm warble of a classic true pitch vibrato pedal. You can use it at slow speeds to bring life and depth to slow chord progressions ala. Steven Wilson or you can wind it up a bit for eerie Mastodon-approved melodies or energetic Lonnie Mack solos. Heck, max it and behold the faces …

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Тype: DI Box
Made in: Germany
UK/EU Power supply included: No

The Sweet Baby pedal from JOYO audio is a top-performer distortion pedal and it has a price-point which makes it a possible selection for any player. The JF-36 model has a focus knob, as well as highly usable volume and drive controls, which all have great range. Together these controls allow you to shape unique tones: From sweet and soothing to all-out rage. Distortion pedals usually don't have as much output as this little monster and the true-bypass wiring keeps your signal integrity at maximum while the gain circuit is not engaged. This JOYO product is built to last with quality components and a sturdy shell casing. With tones from The rolling Stones to ACDC, this pedal can cover a lot of …

Digital stereo reverb effects pedal for electric guitar that is comparable to state-of-the-art studio processors and delivers 24-bit high-resolution stereo reverbs including Spring, Plate, Hall, Gate, Room and Modulate. It features dedicated Mode, Time, Tone and Level controls for awesome sound shaping, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Power Supply: Adapter
Made in: China
Тype: Reverb
Battery Operation: Yes
UK/EU Power supply included: No
Battery Detail: Al/Mn…

Reissue series drive pedal for guitar or bass. The Steel Singer Drive simulates a high end boutique tube amplifier, delivering a transparent mild to medium driven gain, much revered by many famous guitar players. All analog circuitry ensures a pure signal path and a filter control provides a single intuitive EQ adjustment. Subtle gain to smoothly overdriven tones for blues, pop and rock styles. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Filter controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Volume, Gain, Filter & foot switch Input impedance: 1M Ohms Output impedance: 10k …

Reissue series high gain distortion pedal for guitar or bass. The Recto Distortion simulates a hard driven US voiced tube amplifier with a tight bass response for heavy metal and grunge guitar styles. All analogue circuitry ensures a pure signal path and 2-band EQ helps to tailor the frequency response as needed. Powerful tones for heavy riff and barre chord driven rock. Features: Pure analog amplifier simulation True bypass hardware switching Gain, Master & 2-band EQ controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Gain, Master, Bass, Treble & foot switch Input impedance: 1M Ohms Output impedance: 10k Ohms Dimensions: …

Bass Preamp

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
Тype: Buffer
Colour: Black
UK/EU Power supply included: No
True Bypass: No
Inputs: Mono
Battery Operation: No
Power Supply: 9V DC ( - )
Made in: China
Outputs: Mono
Width (cm): 4.2
Depth (cm…

NU-X Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones. Features: Adjustable sustain and level Blend control to feed in some natural attack Selectable soft clip and clean modes Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Controls: …

Rush Booster lets you cut through the clutter and take center stage with one single stomp. Its all-analog circuit offers up a whooping 20dBs of super-transparent clean boost, perfect for solos or beefed up rhythms. All of this is housed in a built-to-last enclosure with true bypass and at a price point so low it's sure to set off a certified tonal adrenaline rush! A lot of boosters out there tamper with your tone by cutting and boosting in certain frequency areas, so by the time you kick it on, you don't sound like you anymore. Rush Booster on the other hand is a true tone gentleman. It just takes your already awesome core tone and makes it louder, leaving the punch and power in your chords …

Eyemaster Metal Distortion brings back the original metal credo of "loud and brutal" with its "simpler-than thou" 2-knob operation. Just set the volume (all the way up, right?) and adjust the gain (anything less than all-the-gain is sacrilege) and start riffing. Eyemaster was specifically designed to channel the Swedish death metal tone, endearingly nicknamed the "Swedish buzzsaw". As that term implies, Eyemaster is not a subtle overdrive. It is not transparent and it does not "sit well in a mix". Rather, it burns an unholy path straight through the mix. The concept of gain is something we often take for granted but rarely do we stop and think about what the term actually implies. These days,…

EP-2 is a passive vol/expression pedal from Valeton Surge series, it features compact size, no need for extra battries or power adapter, you can easily control your instrument volume or some value of your effect with EP-2.While Valeton may not be a household name, the EP-2 is worth a solid look for anyone who’s just wanting a basic volume/expression pedal to get the job done. The unit, as implied by the name, pulls double duty as an expression and volume pedal; two tasks which it performs admirably.
Package Contents: Manual
Controls: Expression Pedal
Outputs: Jack 6,3mm TS
Inputs: Jack 6,3mm TS
Made in: China
Тype: Expression;Passive Design;Volume
UK/EU Power supply included: No
Colour: O…

Pedal Design Foot Pedal / Operation digital / Effects Spring