Car Jacks

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting.Technical SpecificationApplication(s): TTRS MK2 8J (2009-2014), PF3-1660, TT MK2 8J (2007-2014), R8 (2006 - ON), S7 (2012 - 2017), RS7 (2013 - 2017), A7 Quattro (2010 - 2017), A7 (2010 - 2017), A6 / S6/ RS6 C6 (2004-2011), S6 (2012 - 2018), RS6 (2012 - 2018), A6 Quattro (2011 - 2018), A6 (2011 - 2018), Jack Pads, SQ5 (2013 - 2017), Q5 Quattro (2008-2017), Q5 (2008-2017), S5 (2007 - 2016), RS5 (2010 - 2016), A5 Quattro (2007-2016), A5 (2…

Solvent based Bitumen Paint, full bodied black brushable compound with added fibres for reinforcement. Specifically designed for overcoating leaking roofs but can also be used to bond felt. Dries to a tough black coating. Features and Benefits Specifically designed for waterproofing in roofing applications Easily applied by brush Once dried creates a tough weatherproof coating Fibre reinforced, can be used in felt bonding applications Available in 5ltr and 25ltr tins Typical Applications Roofing Waterproofing Building

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

Weight-for-weight, this strap is three to five times stronger than chains and has the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: …

Chamfered base design for compact light - duty trolley jacks. Designed to avert damage to the sill and underside of a vehicle when in use. Made from durable and robust rubber. The slotted rubber feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with trolley jacks with 38 - 55mm diameter saddles.

Twin-piston, quick lift facility - just six pumps to reach maximum height
Lifting range 100-465mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty

• Heavy-duty nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Features robust carry handle that can also be fitted with a rope or chain (not included).• Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm.Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm. Suitable for vehicles below 40…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22.7mm. Size ø122.7mm. Fits saddle ø122-126mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 22.7mm. • Size: ø122.7mm. • Fits saddle ø122-126mm. • Model No. JP05Technical Specification:Nett Weight: 0.19kgJack Pad Size: ø122.7mmStyle: Type CProfile Depth: 22.7mmTo Fit Saddle Size: ø122-126mmWeight: 0.19kgDimensions: Length: 30mm x Height: 190mmWeight: 0.188KgWarranty: Consumable…