Car Jacks

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Replacement hydraulic ram for PH20.V4 engine crane.Replacement hydraulic ram for PH20.V4 engine crane.• Replacement hydraulic ram for PH20.V4 engine crane. • Model No. PH20.V4-ETechnical Specification:Nett Weight: 11.8kgRam Capacity: 8000kgRam Diameter: 33.9mmRam Travel: 502mmPump Type: Single SpeedRam Pin Hole Diameter: 16.4mmClevis Pin Hole Diameter: 16.4mmMounting Point Distance (Min.): 636mmOverall Length (Min.): 670mmBase mount Type: Double ClevisDimensions: Length: 130mm x Height: 125mmWeight: 11.852KgWarranty: Consumable

Bottle jack, with hydraulic unit, max. load 2 t. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Piston diameter = 23 mm. Base plate length = 95 mm. Base plate width = 93 mm. Additional height when unwound = 50 mm. Overall height from - to = 158 - 298 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 8 TonneHydraulic Lift: 145mmMaximum Height: 447mmMinimum Height: 222mmNett Weight: 5.00kgScrew Extension: 80mmTechnical Specification:Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mmDimensions: Length: 132mm x Height: 230mmWeight: 5.214KgWarranty: 3 years

• Min./Max. Height: 355/895mm.• Table Width/Length: 350/410mm.• All steel scissor type construction with foot operation and integral hydraulic pump.• Unique foot design and safety pins allow use with off-road/trials bikes.• Features three locking heights.• Support platform with rubber top protects paintwork on bike.All steel scissor type construction with foot operation and integral hydraulic pump. Unique foot design and safety pins allow use with off-road/trials bikes. Features three locking heights. Support platform with rubber top protects paintwork on bike.• Min./Max. Height: 355/895mm. • Table Width/Length: 350/410mm. • All steel scissor type construction with foot operation and integral hydra…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 4 metre

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.• Min./Max. Height: 145/360mm. • Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. • Made in the EU and fitted with safety ov…

• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Includes mechanical load brake for extra safety. • Al…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 15mm. Size ø94.5mm. Fits saddle ø95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 15mm. • Size: ø94.5mm. • Fits saddle ø95mm. • Model No. JP13Technical Specification:Nett Weight: 0.09kgJack Pad Size: ø94.5mmStyle: Type CProfile Depth: 15mmTo Fit Saddle Size: ø95mmWeight: 0.17kgDimensions: Length: 15mm x Height: 190mmWeight: 0.1KgWarranty: Consumable