Car Jacks

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 1 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle ø100-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 27mm. • Size: 118.5mm Square. • Fits saddle ø100-106mm. • Model No. JP01Technical Specification:Nett Weight: 0.18kgJack Pad Size: 118.5mm (Square)Style: Type AProfile Depth: 27mmTo Fit Saddle Size: ø100-106mmWeight: 0.18kgDimensions: Length: 30mm x Height: 190mmWeight: 0.196KgWarranty: Consumable

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

• Fitted with overload valve.• Base and reservoir machine welded for increased strength and reduced chance of leakage.• Threaded pump assembly allows for easy disassembly and maintenance.• Supplied with 4-piece operating handle.• Service kits readily available.Fitted with overload valve. Base and reservoir machine welded for increased strength and reduced chance of leakage. Threaded pump assembly allows for easy disassembly and maintenance. Supplied with 4-piece operating handle. Fitted with carrying handle. Service kit readily available.• Min./Max. Height: 128/223mm. • Telescopic 2-stage ram for higher maximum lift. • Compact closed height. • Cast base with threaded components. • Supplied with 4…

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 8.3mm. Size ø99.5mm. Fits saddle ø99-103mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 8.3mm. • Size: ø99.5mm. • Fits saddle ø99-103mm. • Model No. JP16Technical Specification:Nett Weight: 0.075kgJack Pad Size: ø99.5mmStyle: Type BProfile Depth: 8.3mmTo Fit Saddle Size: ø99-103mmWeight: 0.075kgDimensions: Length: 10mm x Height: 190mmWeight: 0.074KgWarranty: Consumable

Screw adjustment with easy-to-use spinner nut and ball-bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range. Features & Benefits: • Screw adjustment with spinner nut. • Ball-bearing thrust race. • Removable base. • Min./Max. Height: 1364/2032mm. • Model No. ES750 Specifications: Model No ES750 Brand: Sealey Capacity: 750kg Maximum Height: 2032mm Minimum Height: 1364mm Nett Weight: 12.78kg

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.