Powerline Adapters

Gigabit Ethernet PoE+ Injector, 802.3at Power Pins:4/5(+),7/8(-) and 3/6(+), 1/2(-), 60W.Reduce cabling for Wireless APs, IP Phone and any PoE-ready device:- Complies with the 802.3at Ultra PoE and 802.3af PoE standards- Easily merge of power and data cables into a single cable- Extend your network to places where there are no power supply cables or sockets availableno setup needed- The output is equipped with a current limit, a short-circuit fuse, and automatic terminal device recognition and classification.The Digitus PoE Injector allows you to minimize cabling during installation of PoE-ready devices such as IP network cameras. Data supply and power supply to the devices is accomplished using …

Rugged PoE Splitter | 12-48V DC | IP-30 Aluminum Housing | 1.5A Power Output

Splits a PoE connection (max 90W) into separate data (RJ45) and DC power (terminal block) that can power any device that uses DC power between 12V-48VDC (1.5A). Power non-PoE devices using network infrastructure where power is not available.

Power Non-PoE Devices

Perfect for using PoE to power older devices while also providing network access for monitoring and control applications. Applications include:

Security (card swipe or proximity boxes)

Environmental monitoring (temperature/moisture sensors)

Telco (analog interface systems/conversion)

Straightforward Deployment

Supports IEEE 802.3af …

Ubiquiti Networks POE-24-30W-G-WH 24V Gigabit Ethernet PoE Injector and Adapter.Specifications:Connection:- Ethernet interface type: gigabit ethernet- Ethernet LAN, data transfer rate: 10,100,1000 Mbit/s- Power over Ethernet (PoE): Yes- Certification: CE, FCC, IC, ULPorts and Interfaces:- Ethernet LAN (RJ-45) number of ports: 2Energy control:- Power over Ethernet (PoE): 24V- Output power: 30W- Input voltage: 100 - 240V- input frequency: 50/60hz- Input current: 0.4/0.6A- Suitable for use in country/location: EuropeEnvironmental conditions:- Operating temperature range: 0 - 40°C- Relative Humidity Range for Operation: 35 - 95%- Storage temperature range: -30 - 70°CWeight and measurements:- Broad: 94…

Extend the range of a PoE connection!

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater Model 560962 is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply as it draws the power it needs from the PoE input.

Simple Installation
Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect; e.g. a VoIP phone or a PoE network camera. That's it. There is nothing …

IP Conference Phone 8832 PoE Adapter Spare for Worldwide. A USB-C cable is included.

Axis 02315-001 PoE adapter Gigabit Ethernet 1000 V

Unify HiPath cordless IP PoE Injector

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-Link’s TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords