Cycle Computers

The Bontrager Blendr Garmin Low Mount is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount.Bontrager Blendr Garmin Low Mount FeaturesBlendr is an elegant, integrated accessory mounting solutionProvides clean and secure mount for many Garmin GPS computersWorks with any Blendr-compatible stem and the accompanying baseFor use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)Not compatible for use with the Garmin Edge 1000 or the Garmin Edge 1030

Product 1: Approach. Product 2: Replacement elastic bands for the Garmin quarter turn bike mount Product 2: The bands secure the quarter turn bike mount to your bicycle Product 2: The bands fit around the stem or handlebars Product 2: The quarter turn bike mount is compatible with the Edge 200, 500 and 800

describe: Applicable: Garmin computer stand can only be installed under the Garmin stand i GPSPORT computer stand, with the same hole spacing as Garmin Center distance between two holes: 20 mm Colour: Black Material: Nylon Package Contents: 1*Bicycle Computer Mounting Bracket Kit Only the above package contents, other products are not included. Note: Light photography and different monitors may cause the color of the item in the picture to be slightly different from the actual item. The measurement allowance is +/-1-3cm.

[Most Exercise Spin Bikes use this monitor] - for Stationary Bikes with "head phone jack" look connection tips. E.g. by for bikes Sunny, , L-Now, Snode, Exerpeutic, Pleny, Yosuda, , Faafuu - 90% of Amazon as well as domestic . [Keywords: HeadPhone-Look Cables]Both speedometer & pulse trakcing connection are through 3.5 mm female jacks on the back the monitor - adapters (NOT INCLUDED) might be needed if the device also happen to have FEMALE jacks (rare cases). 2 x AAA Batteries Not Included - Required Note:Without Heart rate function Colour: as shown Material: plastic Package Contents: 1 x Exercise Bike Computer Only the above package content, other products are not included. Note: Light and …

The Garmin Speed Sensor will monitor your speed as you ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.The Garmin Speed Sensor 2 is easy to install and involves no magnets or exposed parts. The sensor is easy to set up and you can set up wheel size using the Garmin Connect app for improved accuracy. The sensor self-calibrates with an Edge cycling computer or compatible with Garmin devices. The wireless sensor will transfer data to a compatible head unit or app using ANT+ and Bluetooth so you can view your stats in real-time and make the most of every ride or training session.Garmin Speed Sensor Highlights-Easily mounts

The BYTE Palmus 20F Wireless Cycling Computer in black is the perfect addition to your cycling gear. Easily track your speed, distance, time, and calories burned with this advanced cycle computer. With wireless connectivity, you can effortlessly upload your data and analyze your performance. This reliable and durable device is perfect for both veteran and beginner cyclists. Get the most out of your cycling experience with the BYTE Palmus 20F Wireless Cycling Computer. Shop now in Electronics, Cycle Computers.

Feature: 1. Versatile Application: The kit is suitable for electric bicycles, tricycles, motorcycles, and other various DC motors. It effectively controls the speed of the motor. 2. High Performance: Features a superior circuit board for an extended lifespan, has high efficiency, high torsion, low heat, anti polarity , and high current rating. 3. Stable and Sensitive Throttle Grip: The electric motor controller provides stable and sensitive speed control, and the throttle grip could also offer a very comfortable grip. 4. Easy To Install: The speed controller throttle grip kit is easy to set up and connects effortlessly with most electric bicycles, providing a quick solution to speed

The PowUnity BikeTrax Yamaha E-Bike GPS Tracker is specially designed for installation in e-bikes with Yamaha motors. During the development of the Yamaha GPS Tracker, PowUnity took the special demands and security requirements of Yamaha e-bikes into account, to fully guarantee the secure, faultless operation of the Yamaha GPS Tracker.Included in the E-Bike Yamaha GPS Tracker Set1x GPS tracker Yamaha with integrated SIM card1x Yamaha connection cable, compatible with all e-bikes with Yamaha motor1x additional battery with a capacity of 1,000 mAh1x piece of double-sided adhesive tape for secure mounting of the GPS tracker1x cable tie suitable for fixing the connection cable1x free smartphone

Works with 6.7'' Screen Phones. With an enlarged camera opening to accommodate larger smartphone lenses. Waterproof material is sonically welded and seam sealed to repel weather, mud, and water for ultimate phone protection. A great way to keep your phone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection and a clear touch window for viewing phone display. The integrated QuickClick mounting system lets you mount or remove the drybag in seconds. NOTE Do not store your phone in DryBag for extended periods in direct sunlight or hot environments. Extended use of your phone in DryBag in direct sunlight may cause the phone to overheat and …

3-in-1 cycling computer with bike computer, cadence and heart rate mode, with this bicycle computer, every cycling data is under control. 2.8'' LCD large screen provides clear and crisp reading, enjoy your pleasant cycling trip! Features: 3-in-1 cycling computer with bike computer, cadence and heart rate mode. Heart rate mode with current heart rate indicator, which can monitor our heart rate during cycling to ensue our safety. Real time recording, speed, distance, time, temperature, calorie, etc. 2.8-inch large screen with LCD back-light allows you to read the data clearly at any time and any angle. Nine languages are optional, English, French, German, Dutch, Italian, Spanish, Hungarian,…

Bike Computer / Wireless / Illuminated Display / Grey / 30 g

This 'Quarter Turn' mounting kit for Garmin Edge 500/800 GPS units is an essential when transferring the Edge between a number of bikes quickly, it uses a simple rubber band fixing method to ensure it will fit virtually any stem or handlebar securely.Quarter Turn Fixing StyleFits For Edge 500 / 800 UnitsSimple Rubber Band FitmentSuitable For All Bars And StemsIdeal For Multiple Bike Applications

Features:- Smart notifications- 103 data items in 13 categories- 11 selectable languages- Positioning of 4 satellites (BeiDou, GPS, GLONASS y Galileo)- Dual-protocol Transmission with Bluetooth & WiFi, with speeds up to 200k/s- 28 hours of battery life (depending on temperature and operating environment)- Training function. Choose your favorite training mode- Supports up to 9 sensor connections- 2.8´´ color touch screen display- Waterproof IPX7- Compatible with Radar Tail L508 rear lightSpecifications:- Screen Size: 2.8 inches- Weight: 105g- Device Dimensions: 97x57x17.6mm- Number of Buttons: 3- Memory for Bikes: 5- Supported Riding Modes: 12 (2 default, 10 customizable)- Supported Data Types: 10…

CNC bicycle luminous computer wired English version backlight odometer road mountain bike touch screen speedometer Product name: Bicycle computer, wired computer, luminous backlight touch screen computer Material: PC+ABC surface bright electronic components Color: black Display: LCD touch screen Power supply: Replaceable button battery Is it waterproof: Yes Display accuracy:99.99 Package:1pc

Introducing the newly designed, streamlined UTF integrated bike mount. The mount is compatible with 4-bolt stems and can be installed on stems with a range of 10 to 35 mm in diameter. The computer can be adjusted up or down by approximately 10 degrees. FEATURES Adjustable adapter / Adjustable angle COMPATIBILITY Fits 4-bolt stems MAX LOAD 550 g DEVICE Garmin / Wahoo / Sigma GPS / Bryton cycle computers, Topeak front lights MATERIAL Aluminum 6061 T6 - CNC

The K-Edge Computer Mount is a precision-made, super secure mount for your Garmin Edge. Made from CNC machined 6061-T6 aluminium. The new design is optimised to fit Garmin Edge computers including the new Edge 1000 GPS cycle computer.Utilising the quarter turn bike mount system, it employs an enhanced copolymer Garmin compatible interface. K-Edge Computer Mount Features Dual positioning possible to enable portrait or landscape modes on the new Edge 1000 Design enable centred positioning for your Garmin unit Garmin will sit in line with the front of the stem and handlebars, giving no change in frontal area - meaning low drag and best aero efficiency Long-lasting protective anodised

Attachment with cable ties to the cart ant+ compatible High-quality materials