Car Jacks

Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike when needing to perform maintenance, servicing or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to prevent accidental lowering. Also fitted with hydraulic dampener for controlled descent. Features & Benefits: • Min./Max. Height: 300/410mm. • Maximum Capacity: 150kg. • Powder coated pressed steel frame, to ensure strength and durability. • Ideal for use with off-road/trials bikes to easily li…

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Features & Benefits: • Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. • Low profile afforded by integral pivot/lifting point. • Model No. BC2000 Specifications: Model No BC2000 Adjustable Beam Width: 75-220mm Brand: Sealey Capacity: 2000kg Dimensions: (A) - 26…

Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings). Fully adjustable to fit wheels Ø15"-21"(380-535mm). Minimum/Maximum Tyre Width: 50-130mm. Please note: Motorcycle must also be secured using tie down straps. Fittings not included. Features & Benefits: • Increases the stability of the motorcycle by clamping the bottom and front of the tyre. • Features a pivot clamp which locks the front wheel securely by the motorcycle weight. • Suitable for fitting on trailers, in vans or to m…

Replacement hydraulic ram for SPC1000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28 Specifications: Model No SPC1000.28 Brand: Sealey Nett Weight: 13kg Ram Capacity: 5000kg Ram Diameter: 31.92mm Ram Travel: 585mm Pump Type: Twin Speed Ram Pin Hole Diameter: 18.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 706mm** Overall Length (Min): 763mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks. Features & Benefits: • Expert Quality • Ideal for the workshop or factory • Lever chain hoist with a totally enclosed pinion gear mechanism • Load braking with double pawls • Chain free feature allows slack in the chain to be taken up prior to ratcheting • High quality welded chain with safety latches on the load hooks Contents: 1 x Chain Lever Hoist, 3 Tonne…

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting.Features & Benefits:• Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle.• High quality rubber, providing a sturdy and durable point of contact.• Secure fit to vehicle, moulded to fit bespoke vehicle fitting.• Model No. JP22Specifications:Model No JP22Application(s): 1 Series: E81. E82, E87 1M.2 Series: F22, F23, F45, F46.3 Series: E46, E90, E91, E92, F31.4 Series…

Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.

Accepts a wide variety of engines and transmissions. The heads swivel 360 for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability.

GREY machine jack, max. load 7 t, 1+ items. Supplied = assembled. Max. load = 7 t. Lifting range with lifting head = 65 - 420 mm. Lift = 355 mm. Weight = 53 kg. Product type = hydraulic jacks. Sturdy steel construction for a variety of applications. Hydraulic system is protected by overload pressure valve. Finely controlled discharge valve for precise lowering. The hydraulic GREY machine jack is made of high quality steel and extremely robust. It has a max. load of 4 or 7 tonnes, can lift vehicles and machinery without difficulty and is therefore highly versatile. Its compact design provides stability and, together with the long pump lever, needs little effort to operate.