United Kingdom

Car Jacks

 prices on 1100 models  
Show
Space-saving design maximizes garage working area. With a low minimum height of 65mm (without frame supports), it will lift and support the bike through to a maximum height of 740mm (840mm with frame supports). Lockable in 2-positions for supporting the motorcycle over extended periods. Unlike most other motorcycle lifts, it is possible to remove both wheels, front forks, steering assembly, rear swing arm and suspension units as well as the engine. This lift benefits from being portable, so can be used anywhere with a hard level floor, making it suitable for mobile motorcycle mechanics. Ideal for use with the Sealey range of wheel chocks to assist supporting the motorcycle, whilst adjusting …
from £405.95 up to £607.37 
Compare prices and buy Sealey Single Post Hydraulic Motorcycle Lift 450Kg MCL500
£406.00
£406.00
£554.00
£607.00
Compare prices4
Heavy duty quality 5 Tonne Lifting range: from 205 to 390 mm Excellent handling and stability Weight: 5.6 kg
£54.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
All steel construction with heavy-duty, foot operated, integral hydraulic pump and ram assembly. Fitted with platform safety lock device to fix at two working heights of 490 and 710mm to prevent accidental lowering. Sliding panel platform and front wheel clamp assist removal of rear motorcycle wheel. Support platform fitted with full width loading ramp. Base assembly fitted with transport wheels and lock-downs to prevent lift moving during use. Suitable for use with centre-stand motorcycles or with paddock stand. Features & Benefits: • Min./Max. Height: 190-710mm. • Table Size (W x L): 690 x 2200mm. • All steel construction with heavy-duty, foot operated, integral hydraulic pump and ram assemb…
from £945.95 up to £1,313.33 
Compare prices and buy Sealey Hydraulic Motorcycle Lift 454Kg MC401
£946.00
£946.00
£1,100.00
£1,207.00
£1,313.00
Compare prices5
The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…
£349.99
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
Buy!
Jcb-tools.co.uk
Bottle jack, with hydraulic unit, max. load 12 t. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Piston diameter = 43 mm. Base plate length = 133 mm. Base plate width = 137 mm. Additional height when unwound = 60 mm. Overall height from - to = 215 - 400 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …
from £159.60 up to £183.60 
Compare prices and buy with hydraulic unit, with hydraulic unit, max. load 12 t
£160.00
£172.00
£184.00
Compare prices3
Spare Parts for Kennedy Bottle Jacks
£4.29
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Furniture mover, hydraulic, pack of 2, max. load 4000 kg, lift 200 mm. Supplied = assembled. Max. load = 4000 kg. Frame material = steel. Frame colour = pure orange RAL 2004. Width = 660 mm. Height = 1080 mm. Depth = 465 mm. Wheel diameter = 200 mm. Wheel bearing = ball bearing. Wheel type = non-marking. Finish = zinc plated and powder coated. Footplate width = 590 mm. Footplate depth = 100 mm. Lifting range = 8 - 200 mm. Product type = furniture transport units. Application = diverse. 8 m cargo restraint strap. Robust hydraulics. Ball bearing mounted wheels. Ideal for moves, maintenance or fitting. Non-marking wheel tyres for protecting carpets and floors. Completely assembled and ready for …
£7,620.00
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
Used for lifting on contoured and round lifting surfaces. Provides more access underneath the vehicle making it easier to work on. Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 4 Tonne Jacking Beams.Features & Benefits:• Used for lifting on contoured and round lifting surfaces.• Provides more access underneath the vehicle making it easier to work on.• Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact.• Suitable for use with Sealey Viking 4 Tonne Jacking Beams.• Model No. SJBEX.A04Specifications:Model No SJBEX.A04Brand: VikingCapacity: 4 TonneNett Weight: 0.84kg
£44.95
Tooled-up.com
Delivery: to United Kingdom
Report
Buy!
Tooled-up.com
Cat5e Keystone Jack Utp Orange 210577
£2.51
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Manufactured from durable polypropylene. Features & Benefits: • 3 Tonne Capacity per pair. • Manufactured from durable polypropylene. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000C Specifications: Model No CAR3000C Brand: Sealey Capacity Pair: 3000kg Maximum Tyre Width: 260mm Nett Weight: 0.00kg Overall Dimensions (L x W x H): 900 x 300 x 215mm Ramp Height: 160mm
from £88.95 up to £124.94 
Compare prices and buy Sealey Car Ramps Pair 3 Tonne Capacity CAR3000C
£89.00
£115.00
£125.00
Compare prices3
The EVOcrk is a professional quick-lift hydraulic jack designed for rally car use. Weighing only 3.5kg the EVOcrk folds up to a compact package when not in use so can easily be stored in the rally car.Operation of the jack is simple, an adjustable height 22mm diameter pin inserts into a tube on the car body. Pump the handle and the car lifts, it takes only 9/10 strokes to reach the full height of 610mm. The base of the jack is made from a durable polymer with a grippy rubber sole so it provides support and grip on most surfaces. The base also swivels to account for the jack angle changing as the car is raised or lowered.  Technical Specifications Base Adjustable for extra
£753.34
Demon-tweeks.com
Delivery: in United Kingdom
Report
Buy!
Demon-tweeks.com
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
from £79.95
Compare prices and buy Sealey Lifting Strap 5m 5 Tonne LS5005
£80.00
£80.00
Compare prices2
The Clarke CTJ2QLP Jack combines the benefits of a low profile and a quick lift trolley jack. These features are very useful for rapid operation on low cars, making it ideal for motor sports, garages and mobile service operators.
£191.98
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 60mm, 2 Tonne
from £18.95 up to £22.79 
Compare prices and buy Draper Duplex Lifting Strap Reinforced Sling 60mm 4m 2 Tonne
£19.00
£19.00
£23.00
Compare prices3
Note: Image is for illustrative purposes only and may differ from the actual product
£899.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.15 Tonne Bottle Jack• Min./Max. Height: 231/441mm.• Fitted with overload valve.• Base and reservoir machine welded.• Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ15SModel No: PBJ15S:Brand: Viking:Capacity: 15 Tonne:Hydraulic Lift: 150mm:Maximum Height: 441mm:Minimum Height: 231mm:Nett Weight: 7.15kg:Screw Extension: 60mm:PTDSEAPBJ15S
£90.55
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Specifications:Ports & interfaces: - Connector 1 : QD- Connector 2 : 3.5 mm- Connector 1 form factor: Straight- Connector 2 form factor: StraightSustainability- Sustainability certificates: CEPackaging data: - Package width: 135 mm- Package depth: 5 mm- Package height: 200 mm- Package weight: 40 g
from £10.10 up to £21.47 
Compare prices and buy Jabra 8800-00-99
£10.00
£13.00
£13.00
£19.00
£20.00
Compare prices7
Package Includes: Model No. - Description 3000CXD - Trolley Jack 3tonne Standard Chassis AS3 - Axle Stands (Pair) 3tonne Capacity per Stand - White You may also refer to the individual Model No. for full specification.
£249.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 6.5mm. Size Ø94mm. Fits saddle Ø93-96mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 6.5mm. • Size: Ø94mm. • Fits saddle Ø93-96mm. • Model No. JP17 Specifications: Model No JP17 Brand: Sealey Nett Weight: 0.050kg Jack Pad Size: Ø94mm Style: Type B Profile Depth: 6.5mm To Fit Saddle Size: Ø93-96mm Weight: 0.050kg
from £9.00
Compare prices and buy Sealey JP17 Safety Rubber Jack Pad Type B
£8.00
£9.00
Compare prices2
Professional quality bottle jack with a telescopic two stage hydraulic ram and screw extension provides a much greater maximum while maintaining a low minimum height level.
£137.99
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.
£3.39
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The WINNTEC® from SIP 12 TON Trolley Jack Stands offer mobility and heavy-duty load support, utilising a heavy-duty pin support column, for safe and simple adjustment, and a manoeuvrable design with wheels for easy positioning in all applications. Suitable for professional garages and workshops. KEY FEATURES 302mm to 450mm lifting height range Pin-type support column with wide base to spread weight Mobile design with wheels for easy stand positioning Supplied as a pair of stands for extra support WINNTEC® from SIP 3-Year Warranty
£229.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Includes mechanical load brake for extra safety. • Al…
£226.86
Electricalworld.com
Delivery: in United Kingdom
Report
Buy!
Electricalworld.com
Bottle jack, with hydraulic unit, max. load 12 t, 2+ items. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Overall height from - to = 215 - 400 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£169.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height