Car Jacks

Bottle jack, with hydraulic unit, max. load 8 t. Supplied = assembled. Max. load = 8 t. Lifting range with lifting head = 200 - 385 mm. Lift = 125 mm. Weight = 5 kg. Piston diameter = 38 mm. Base plate length = 110 mm. Base plate width = 118 mm. Additional height when unwound = 60 mm. Overall height from - to = 200 - 385 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 6 metre

• Heavy-duty nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Features robust carry handle that can also be fitted with a rope or chain (not included).• Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm.Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm. Suitable for vehicles below 40…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Heavy-duty trailer jack with swivel mounting.• Suitable for handling trailers with heavy nose weight.• Integral swivel weld-on mounting.• Min./Max. Height: 230/480mm.Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.• Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm • Model No. TB373Technical Specification:Capacity: 900kgMaximum Height: 480mmMinimum Height: 230mmNett Weight: 4.62kgDimensions: Length: 253mm x Height: 125mmWeight: 5.136KgWarranty: 1 year

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 2 metre

• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles.• Enables easy movement around workshop or bodyshop.• Crutch supports adjustable for height and overall width.• Fitted with four ø90mm locking metal castors.Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Crutch supports adjustable for height and overall width. Fitted with four ø90mm locking metal castors.• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. • Enables easy movement around workshop or bodyshop. • Crutch supports adjustable for height and overall wi…

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

• Use to manoeuvre motorcycles (maximum 300kg vehicle weight) with centre-stands.• Perfect for places where space is restrictive.• The dolly is made from 4mm thick hardened steel-plate.• Covered with anti-slip rubber pad.• Foot/hand operated built-in brake mechanism.• Ideal for workshop, showroom and home garage use.This motorcycle moving dolly can be used to manoeuvre motorcycles (maximum 300kg vehicle weight) with centre-stands and is perfect for places where space is restrictive. The centre-stand locates on the 4mm thick hardened steel-plate and the 360 degree castors allow the bike to be moved in any direction. Features a foot/hand operated built-in brake mechanism which is ideal for workshop…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…