Power Saws

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a 10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

The latest generation of the Bosch KEO saw is now powered by a PowerForAll 18v battery, meaning that the tool shares battery compatibility with a wide range of tools for the home and garden, from Bosch as well as other manufacturers in the PowerForAll 18v Alliance. Battery power gives you the freedom to work just about anywhere and with a 2ah battery installed, the KEO can keep going long enough to make up to 115 cuts on a single charge. The saw will cut through branches up to 80mm in diameter and the detachable A-Grip branch holder attachment grips smaller branches securely for single-handed cutting. The KEO also makes a handy DIY saw, and can be fitted with blades for other materials too, …

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

HSS Cobalt Hole Saw 76mm 3in~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of metal, wood, aluminium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibrationTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety gogglesDimensions: Length: 76mm x Height: 43mmWeight: …

Features: - High-Performance 4.2ah Li-Ion Battery Pack (Optional)- 55min. Usable And 70min. Full Charging- Light Weight 2.8kg (Measured Incl. Optional Battery)- For Wood- Transparent Window For Easy To See The Cutting Edge- Electric Speed Control- 3-Way Dust Control System- Ergonomic Design- Soft Grip- Led LightSpecifications: Technical Data:- No-Load Speed (Min-1): 4500- Cutting Depth In Wood (Mm): 46- Saw Blade Diameter (Mm): 135- Handle: YesEnergy Supply:- Battery Voltage (V): 18- Type Of Battery / Rechargeable Battery: Lithium-Ion- Rechargeable Battery Capacity (Ah): 4,2- Charging Time (H): 1,16Type:- Type: Hand-Held Circular Saw- Operating Mode: Rechargeable BatteryGeneral:- Overall Length …

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models. The ALMCH050 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guide bar slot 0.375 mm and Low profile (L/P) 1.1 mm guide bar slot. This chain is made to fit the B& Q / McCulloch / Performance Power / Stihl ranges and suit saws with a 35cm bar and chain with 50 drive links including PWR1700CSB, PP35CS / Electramac 335, Electramac 414, Electramac 441 / MS180, 020, 021, 023

Lumberjack SCMS305DB 12" Double Bevel Sliding Compound Mitre Saw

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-95-C Carded Size: 95mm.Additional Information:• Size: 95mm• Material: TCT

Milwaukee Bi-Metal Contractors Holesaw features an optimised variable 4-6 tooth geometry for faster cutting and universal use. Bi-Metal teeth for best durability and increased wear resistance. For universal use with steel, non ferrous metals, wood, drywall plasterboard and plastics. Specifications • Diameter: 98mm • Cutting Depth: 38mmFeatures & Benefits• Optimised variable 4-6 tooth geometry for faster cutting • Bi-Metal teeth for best durability and increased wear resistance • For universal use: steel, non ferrous metals, wood, drywall plasterboard, plastics

Bahco Sandflex® Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.Size: 121 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.…

Bosch 2608594239 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 102mm The Bosch 2608594239 HSS-Bi-Metal Holesaw has a diameter of 102mm and a working length of 44mm. BiM Progressor Hole Saw offers a 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. Features:
- Redesigned with Bi-Metal with 8% cobalt alloy for increased durability
- BiM Progressor …