Car Jacks

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedan more→s,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle [Durable Material and Easy Operation]Floor jack

The WINNTEC® from SIP 20 TON Low-Profile Air Bottle Jack offers easier and safer lifting of vehicles both large and heavy, by providing powerful air-assisted horizontal and vertical performance, a more→nd lifting up to 260mm along with a versatile 80mm screw extension. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 148mm to 260mm lifting height range 45mm screw extension for improved versatility Low-profile design ideal for performance vehicles Designed for horizontal and vertical operation Aluminium air motor for heavy-duty performance WINNTEC® from SIP 3-Year Warranty

3 Bellows Hand Held Air Jack

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowe more→ring speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification.

High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead mans control. Heavy-duty long steel chassis with wide wheelbase provides inherent stabilit more→y and easy-access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.2 Tonne High Lift Low Profile Trolley Jack• Min./Max. Saddle Height: 80/805mm allowing low entry.• High lift jack arm with incredibly low minimum access height of just 80mm.• Fitted with quick lift foot pedal and dead mans control.• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points.• Fitted

A set of 4 Gojak vehicle moving jacks that comes with a FREE storage rack. The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle o more→r keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction. 2 Jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform.FREE movable storage rackSet of 4 jacks for easy vehicle movement in confined spacesChoice of jack model to suit various vehicle typesEasy 1 person operationTo operate the Gojak mechanical leverage applied by the foot pedal progressively squeezes the vehicle tyre between the

This Clarke trolley jack benefits from an extra low saddle and frame as well as a slow release function for additional safety. Its rubber contact pad prevents damage to vehicles, while the rear swivel more→casters make manoeuvring the trolley jack easy without sacrificing stability. The nylon wheels and casters prevent marking on smooth garage floors.

Zinc Plated Side Winding Parking/Lifting Jack with Round Fixing Tube supplied with Inner Tube for welding. Height Retracted 405mm, Height Extended 655mm, Box Size 60mm, Round Base Diameter 150mm, Load more→Capacity 2000kg

Strong enough to support the most vigorous 2.5 ton lifting capacity Lifting Height with quick lift function for quick and effortless lifting up to 450 mm Vollgummiauflage for trolley jack and liftin more→g stage Easy to use and fit most of the trolley jack and bodywork (e.g. Unitec, Michelin).

The CTJ1500QULP is made from heavy duty steel and combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars makin more→g it ideal for motor sports and mobile operators.- Ultra low profile - 72mm min saddle height - 607mm Max Saddle Height- Foot pedal for quick lift to vehicle contact point - Quick lift to max height in only 8 strokes- Long Reach and High Lift with Non-Marking Wheels- Automatic pressure relief vPTDCLA7623075

Trolley Jack / Max Load 3 t / Hubhöhe 505 mm / Unterfahrhöhe 75 mm / 34.2 kg / Cushions

Loading support for semi-trailers, max. load 25 t, contact surface LxW 1800 x 150 mm. Supplied = assembled. Max. load = 25 t. Contact surface = 1800x150 mm. Adjustment range = 1020 - 1470 mm. Product more→type = uprights. High max. load due to steel construction. Chassis provides easy, fast positioning. Ball bearing base plate. The new Trailer Jack has greatly advanced the safety of semi-trailers and containers when being loaded and unloaded. The telescope loading prevents uncoupled trailers from tipping while being loaded by pallet trucks or due to load changes. This is positioned like a leg below the front edge or the suspension area of semi-trailers or containers.

Bottle jack, with hydraulic unit, max. load 3 t, 2+ items. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Overall height from - more→to = 168 - 318 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle

Seal Repair Kit for ZT1120453X by Kennedy