Power Saws

Insulated Hacksaw Frame. Blade Length: 300mm/12".

Rotabroach Mini Cutters cut clean, burr-free holes in seconds. Features and Benefits: Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. Precision ground M2 high Speed Steel Over 3 times faster than standard twist drills making them highly economical. Low power consumption giving a long life to cordless drills. Typical Applications: The professional solution for cutting clean accurate holes in sheet metal, pipes and plastics.

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.

Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Features:- The Bosch EXPERT Tough Material Hole Saw great all-rounder for every tradesman – because half a hole is not even worth half a hole.- Long Life Cutting Holes in Multi Material- Extreme durability is built in with Bosch Carbide Technology- Individually ground teeth made from fine, hard Carbide- For use with the Bosch Power Change Plus…

Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again.The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- For Use With The Bosch Power Change Plus…

Features:- Tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts- Made of bi-metal HSS containing 8% cobalt alloy for long-lasting cuttingSmooth Cutting:- Bi-metal Hole Saw offers smooth cutting through various materials- Made of bi-metal HSS containing 8% cobalt alloy for long-lasting cuttingSpecifications:- Diameter (D) mm: 108- Diameter inches: 4 1/4- Working length mm: 44Materials:- Softwood- Drywall- Metal pipes and profiles- Non-ferrous metals- Plastics

Expert Quality, bi-metal with 8% COB alt added for extra strength. 1/4" hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel helping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals. Contents: 1 x Bi-Metal Hole Saw with Integrated Arbor, 38mm

nanoBLADE Wood Speed 65 The nanoBLADE Wood Speed 65 offers fast cutting in wood with a cutting depth of up to 65 mm. A rotating cutting string provides an effortless cutting process with only little vibration. The stable guiding unit ensures precise cutting angles and makes following predefined straight lines easy. The tip actively cuts and therefore supports plunge cutting applications. This NanoBlade is ideal for rough sawing to complete a wide range of DIY projects such as cutting wooden branches or roof laths, or shortening workpieces. It can be used in wood, laminate and also selected plastic materials like PC, PVC, PMMA and WPC. This NanoBlade fits all hand-held NanoBlade saws including …