Car Jacks

• 78-510mm lifting range • Single piston pump for a fast lift, reaching full height in just 2.5 strokes • Low profile design • Integrated rubber saddle pad prevents damage to underside of vehicle • EVA foam handle prevents panel damage • Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors • Safety valve prevents the jack from overloadingThis trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrat…

The Sealey VMD002 Vehicle Moving Dolly enables easy movement around workshop or bodyshop The Sealey VMD002 is a 4 Post Vehicle Moving Dolly with a heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. The adjustable frame allows you to change the length and width as required. Features:
- Fitted with four 200mm nylon locking castors
- Enables easy movement around workshop or bodyshop
- Adjustable frame allows you to change the length and width as required
- Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles Specification: 
- Capacity: 900kg 
- Model No: VMD002 
- Minimum Width: 680mm 
- Minimum Heig…

Ratchet type axle stands with cast iron support posts and tough steel plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 275/415mm. • Capacity: 4 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel plate welded bases. • Sold in pairs. • Model No. VS2002

Bottle jack, with hydraulic unit, max. load 20 t. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Piston diameter = 48 mm. Base plate length = 153 mm. Base plate width = 162 mm. Additional height when unwound = 60 mm. Overall height from - to = 235 - 440 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

• Durable 2.1kg rubber wheel chocks (1.05kg each).• Prevents car, caravan or light aircraft moving when jacking or parked on an incline.• Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels.• Not intended for use on sloped ground over 10°.Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Durable 2.1kg rubber wheel chocks (1.05kg each). • Prevents car, caravan or light aircraft moving when jacking or parked on an incline. • Not intended for u…

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 3 tonne. • Model No. WC01

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Heavy-duty steel-plate with rust resistant finish.• Fitted with four ø75mm metal castors, two lockable.• Each dolly features a side handle for easy carrying.• Can handle up to 250mm profiles.• Suitable for use in bodyshops and workshops.Heavy-duty steel-plate with rust resistant finish. Fitted with four ø75mm metal castors, two lockable. Each dolly features a side handle for easy carrying. Can handle up to 250mm profiles. Suitable for use in bodyshops and workshops.• Can handle up to 250mm profiles. • Fitted with four ø75mm metal castors, two lockable. • Heavy-duty steel-plate with rust resistant finish. • Each dolly features a side handle for easy carrying. • Suitable for us…