Other for Security Axis

AXIS FA4115 is a compact varifocal dome sensor unit for discreet indoor video surveillance in stores. offices and banks. For use with an AXIS FA Main Unit. AXIS FA4115 provides a 1080p resolution and flexible viewing angles ranging from a 53º to 99º horizontal field of view. A narrower field of view enables finer details to be captured. In wide mode. more of a scene can be covered. AXIS FA4115 uses Forensic WDR (wide dynamic range) that is tuned for motion. The unit comes with a mounting bracket and an 8-m (26 ft) cable for connection to a main unit.

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions with different lengths of marine-grade (SS316L) stainless steel straps. One version for poles with diameter between 50-150 mm (2-6 in). and one for poles with diameter between 100-410 mm (4-16 in) in diameter. Additionally. it can be used for attaching cameras to beams. When AXIS T91B47 is used for Axis fixed dome or fixed bullet cameras. no additional accessories such as pendant kits are required. ensuring a cost-efficient solution.

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions with different lengths of marine-grade (SS316L) stainless steel straps. One version for poles with diameter between 50-150 mm (2-6 in). and one for poles with diameter between 100-410 mm (4-16 in) in diameter. Additionally. it can be used for attaching cameras to beams. When AXIS T91B47 is used for Axis fixed dome or fixed bullet cameras. no additional accessories such as pendant kits are required. ensuring a cost-efficient solution.

AXIS T94P01L Recessed Mount enables sleek. elegant and discreet recessed ceiling installations together with AXIS M5525-E PTZ Network Camera. It is suitable for air-handling spaces in indoor installations as the back box is made of metal and has a 3/4” (M25) hole for protected cable-runs in conduits. When the camera is attached to the recessed mount it is embedded into the ceiling. revealing only the camera dome and the low-profile cover ring. which is easily repaintable.

AXIS T91B53 Telescopic Ceiling Mount is ideal for retail and commercial environments. where a fixed dome or a fixed box camera need to be installed under high ceilings. The telescopic functionality allows the installer to easily and securely adjust the length of extension between 1m/3.2ft to 1.8m/6ft at 10 cm/4” intervals. The base of the telescopic mount is compatible with AXIS T94F01P Conduit Back Box for a safe cabling through 1/2” (M20) conduit pipes. The lightweight and robust ceiling mount can also be installed horizontally on walls when secured with AXIS Safety Wire.

AXIS T94S01P Conduit Back Box is an outdoor-ready. impact resistant (IK10+) back box designed to be mounted behind a wide range of Axis network cameras. It has an ingress-protected (IP66/IP67) compartment for secure storage of connectivity devices. Examples include storing an IP-over-COAX adapter to re-use legacy cabling or a network cable coupler to bridge between rigid and flexible network cables. AXIS T94S01P enables both camera and connectivity device to be safely mounted at the same point. without need for extra cabinet installation (even directly onto junction boxes). The finished installation is both aesthetically pleasing and able to withstand challenging outdoor conditions.

Optimized to match your cameras field of view

Based on the latest LED technology AXIS T90D20 IR-LED delivers more light where it is needed. It generates longer infrared LED illumination distance minimize light wastage and prevent overexposure of foreground objects. With interchangeable lenses the angle of illumination can be optimized to match your network camera's field of view. AXIS T90D20 IR-LED Illuminator comes with a pre-mounted 10 diverging lens and it includes diverging lenses of 35 60 and 80 beam angle. Moreover an optional 120 diverging lens is available.

Based on the latest LED technology. AXIS T90D25 W-LED delivers more light where it is needed. It generates longer white LED illumination distance. minimize light wastage. and prevent overexposure of foreground objects. With interchangeable lenses. the angle of illumination can be optimized to match your network camera's field of view. AXIS T90D25 W-LED Illuminator comes with a pre-mounted 10º diverging lens. and it includes diverging lenses of 35º. 60º and 80º beam angle. Moreover. an optional 120º diverging lens is available.

AXIS T94C01L Recessed Mount is an indoor mount for drop ceiling installations. It comes with a single-screw ceiling attachment for quick and easy installation. AXIS T94C01L Recessed Mount enables sleek. elegant and discreet recessed ceiling installations of Axis indoor cameras. compatible with AXIS M42 series and AXIS Companion Dome mini LE. It features a patent-pending single-screw ceiling attachment design. which makes the installation quick and easy without having to remove the ceiling tile. Axis fixed dome camera attached to the recessed mount is embedded into the ceiling. revealing only the camera dome and the low-profile cover ring.

Versatile 4-in-1 mount accessory for use as either a pendant kit with 3/4" (M25) conduit interface. conduit back box with 1/2" (M20) conduit side entry. pole mount. or standard camera thread. Compatible with AXIS M42 series and AXIS Companion Dome mini LE. Pole mounting straps available separately.Use as a pendant kitPendant kit to enable use of Axis mounting products featuring a 3/4" pipes.For use as a conduit backConduit back box for 1/2" or M20 pipes. Features the 1/2" ACI interface to enable use of ACI adapters. There is an integrated female tripod thread for use of standard camera stands or holders.For use as a pole mountStainless steel pole mount compatible with cameras with standard tripod …

Black accessory casings for AXIS M42 series. Replaces the original white casings. 4-piece bulk pack.

Roomy compartment for protection and connectivityAXIS T91G61 Wall Mount Grey is specially designed to accommodate and safely protect against water ingress inside the mount. such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data.

AXIS T94J01A Wall mount grey

AXIS T94J01A Wall Mount Grey is an aluminum wall mount suitable for AXIS Q6215-LE. It is compatible with Axis ACI 3/4 conduit adapters and offers six cable entries. Cables can be routed through the back or by using a conduit connection from each side or from the bottom. Compatible with AXIS T94N01G Pole Mount Robust and impact-resistant aluminum wall mount forAXIS Q62 Series. Multiple cable entry points for 3/4 (M25) conduit pipes. Suitable for indoor and outdoor use. Color: Urban Grey.

AXIS T94V01C Dual Camera Mount is a highly versatile accessory that allows back-to-back installation of two Axis cameras for panoramic coverage. It is compatible with a wide range of Axis network cameras. including dome cameras. box cameras. and bullet cameras. It can be easily mounted to diverse Axis mounting accessories with 1.5” NPS threaded interface. for mounting on walls. poles. and under ceilings. AXIS T94V01C is IK10 rated for impact resistance. which safeguards it against vandalism. Suitable for both indoor and outdoor use. Note: To ensure physical stability. do not use AXIS T94VO1C for single camera installations.

Hp - Psg Top Config

AXIS M30 SKIN COVER A BLACK 4P

Axis 01464-001 security camera accessory

AXIS T91A33 Lighting Track Mount is a unique accessory designed for mounting a wide range of Axis cameras and stands on lighting track systems. With no need for drilling. alterations to existing track systems. or running cables inside walls or ceilings. this Axis accessory helps to save time and money during installation. Furthermore. benefit from the flexibility to reposition cameras along the track whenever needed. AXIS T91A33 is compatible with a broad range of universal 3-circuit lighting track systems and common linear trunking systems. It is available in white and black to easily blend in with the lighting track system.

This Tamron varifocal 5 megapixel CS mount lens has a focal length of 8 – 50 mm and the fast aperture (F-number) is F1.6. The P-Iris lens is specially made for cameras with support for P-Iris technology and supports cameras with up to 5 megapixels. The lens is compatible with selected cameras from AXIS P13 Network Camera Series.- Varifocal 5 MP lens- P-Iris- 8-50 mm

AXIS T91B57 Pole Mount is a high-quality pole mount designed for use with selected AXIS T91 wall mounts and AXIS T98A cabinet series. It is easily adjustable to fit poles with a diameter between 100-410 mm (4-16 in). The pole mount has an IK10 rating for impact resistance. which safeguards it against vandalism. It features a closed back and a cable gasket. which means it is also protected against insect infestation.

AXIS T91B67 Pole Mount is suitable for all Axis fixed dome cameras compatible with 1.5” NPS threaded Axis pendant kits. Thanks to its impact-resistant and outdoor-proven material. the mount can be used in both indoor and outdoor environments. AXIS T91B67 is intended for poles with a diameter between 65-165 mm (2 1/2-6 1/2 in). and also for beams. It features 3/4" conduit side entries for protected cable runs. and a closed back with cable gasket for protection against insect infestation.

AXIS T91A33 Lighting Track Mount is a unique accessory designed for mounting a wide range of Axis cameras and stands on lighting track systems. With no need for drilling. alterations to existing track systems. or running cables inside walls or ceilings. this Axis accessory helps to save time and money during installation. Furthermore. benefit from the flexibility to reposition cameras along the track whenever needed. AXIS T91A33 is compatible with a broad range of universal 3-circuit lighting track systems and common linear trunking systems. It is available in white and black to easily blend in with the lighting track system.

With door controllers from Axis you install one smart independent device by each door to create a scalable access control system. The open platform allows you to mix and match best-of-breed software and hardware and enables easy integration with other systems such as video surveillance intrusion detection and time and attendance. AXIS A1601 Network Door Controller is ideal for advanced access management using a partner software in mid-sized and large multi-site installations. It has a powerful processor expanded storage and memory relays and I/O ports. AXIS A1601 is powered by PoE+ and can also power connected equipment.

OverviewConduit locknut for AXIS T91B53 Telescopic Ceiling Mount. It includes 4 pieces 3/4" nuts for use with pendant kit.