Tripods

Including ball head with separate horizontal clamping and quick release coupling system including spirit level and safety lever Stable legs with a modern trapecoidal design and made of anodized aluminium, centre column with clamping screw Leg angle adjustment with ground level macro position by ergonomic adjusting sleeves, reliable clamping of the tripod legs by robust tripod leg clips 10 year's CULLMANN manufacturer's guaranty CULLMANN REVOMAX 535 RB 7.3 - tripod with ball head und camera-quick release coupling system CULLMANN REVOMAX 535 RB 7.3 - tripod with ball head und camera-quick release coupling system

Monopod / Clip Lock Legs / Anti-Slip / Aluminium / Tripod Head Type Without Head

1.The stainless steel replacement foot spikes can be screwed into the threaded 3/8inch -16 holes at the ends of the tripod legs.2.These foot spikes allow the tripod leg dig deep into soft surfaces of the terrain to establish a stable footing with the ground while on softer, looser terrain.3.The universal 3/8inch -16 stud at the top allows you to use them with any brand that uses the standard 3/8inch -16 thread.4.Compatible For , , Siri, and other tripods standard 3/8 inch threaded tripod foot and/or monopod foot.5.They're an Perfect way to keep your tripod stable while on softer, looser ground such as snow, sand, soft earth, gravel, and other loose surfaces. They're also useful on carpeting.…

ULANZI Go Quick II series: Quick release in 1 second. Magnetic quick connection without screws. An internal locking pin ensures more safety during use. Quickly switch between multi-tripod and mounts with the ULANZI Go Quick II system. Load capacity up to 1.5 kg: the legs are made of high-quality silicone. It is not easy to break, even in hot and cold weather. Each leg is supported inside by 8 durable aluminium wires to ensure high stability. 360° Panoramic Head: Thanks to the silky smooth rotation, none of the great landscapes on your journey will be left out. Flexible legs: the tripod can be flexibly wrapped around the tube. For example, bicycles, motorcycles, railings, branches, etc.

Quick and safe: with the simple rotation mechanism and non-slip rubber, you can install your phone immediately. The universal design allows you to mount all smartphones with a maximum width of 9 cm. FITS ALMOST ANY TRIPOD AND HANDLE - Attach the phone holder to a tripod or handle with the universal 1/4" screw connection at the base or side. With accessory attachment - Use the cold shoe rack or the additional 1/4" universal screw connection to mount accessories such as a microphone or lamp. Film also vertical – with this phone holder you can also create vertical videos, e.g. social networks. Super sturdy metal design – the stand is made of metal and is therefore extremely strong.

Features: Light stand with 5-section tubes(max. diameter: 28mm; min. diameter: 16mm), more stable and more durable. Max. height is 182cm/6ft, and load capacity is up to 10kg/22lbs, suitable for studio reflector, softbox, LED video light, ring light, etc. Standard light stand mount for using with most of light head, and the 1/4 inch screw on the top increase the light stand compatibility. Foldable design, can be folded up and released quickly and easily, and folded length is 46.6cm, convenient to carry. Anodic oxidation treatment steel material, durable and anti-rust, good for heavy duty work. Specifications: Material: Steel Tubes: 5-section Leg Diameter: max.28mm Max. Height: 182cm/6ft Folded …

The workhorses of professional and amateur photographers around the world. The Ex-Pro Digipod TR-130S offers excellent value v's price in comparison to others brands in the market, with exceptionally smooth movement of the center column, 350mm - 1060mm, designed specifically as a travel Tripod, light and still giving good specifications on the move.Ex-Pro DigoPod TR-130S Professional Photographic Camera / Camcorder Tripod (350mm - 1060mm) 40" Travel Tripod, Spirit Level, Fast Install, Quick Release, High Quality.Lift centre column, with locking knob and spirit level. 90 Degree Tilt mech.Leg Diamter :- 17mm profile , From min to full heigh in 5-sec, Folded size 400mm, Minimum Height 350mm, Maximum …

SL2001 Weight: 5.5 kg (12.2 lbs)

Feature: Quick Release Plate in size of 4cm*3cm, with 1/4 inches screw, fit for DSLR, camcorder, digital camera, mini projector, etc. steady and reliable. (Compatible with Nikon D3300, D3400, D5300, D7000, Canon 7D, Canon Rebel, Sony A7, Sony A6000, Sony A7iii and so on.) 3-Angle Positioning Design ensures stably shooting even on cramped quarters or on uneven rough ground; the tripod is lightweight and compact, with adjustable height from 40cm(15.8in) to 126cm (49.6in), perfect for travel, outdoor adventures or indoor activities, convenient to carry. Equipped with 360-degree panoramic ballhead and bubble fluid level indicator on the tripod, for accurate professional shooting; the middle shaft …

Made of magnesium aluminum alloy, equipped with professional 1/4'' and 3/8'' screw, compatible with tripods have 3/8'' screw. The tube diameter is 25mm and the tube length is 300mm. Sturdy aluminum construction and locking system,which can ensure 5KG(11.02 Ibs) load capacity. Adjust the shooting angle freely, allows you to move the center column from 0 to 180 degree angles in various vertical and horizontal positions. Spiral knob locking system makes the operation easier and quicker. Install the base to tripod and then install ball head or a camera to the center column.

For Sony Xperia 5: HELPFUL: Selfie Stick was yesterday! With our universal tripod your smartphone you never do again shaky cell phone photos. The three-legged tripod is always stable. This is possible through the individually extendable legs. This turns each snapshot into a high-quality photo. For Sony Xperia 5: HANDY & PRACTICAL: The tripod weighs only 66g and is 14cm high. Thus, it fits comfortably in any pocket, jacket pocket, shirt pocket and every backpack. For Sony Xperia 5: UNIVERSAL: The Tripod is suitable for all smart phones and mobiles. The holding device can be opened up to 8.5cm. >All of today's smartphones fit into the holder. Cell fits into the holder with Case! For Sony

Fit the Manfrotto Q6 Top Lock quick release system to an existing photo head Fast, easy to use and very secure Quick release mechanism suitable for heavy pro equipment

1

【Widely Application】 Complete tripod for digital cameras,DSLR cameras,camcorders, DV,Video Recorder,projector, spotting scopes, and many other devices equipped with standard 1/4 tripod mounts 【Keep Tripod Steady】 The center column is reversible for taking photos with non-slip feet to keep the tripod steady. Max load weight Is 8kg for optimal performance 【More durable and flexible】 The Travel Camera Tripod made with Metal Ball head ,solved the problem of plastic material slip and crack Inadditon,The Ball head design with 2 independent control knobs and 360 degree panoramic panning scale, suitable for horizontal panoramic shooting. 【Adjustable-leg height】 The feet of the tripod extends from 6.8…

Camera Tripod / Foam Grip / Multiple Leg Angle Positions / Aluminium / Tripod Head Type Ball Head

The C-shaped clamp (U-shaped clamp) is made of metal, and the nut is tightened, and the clamping force is very large. The front end is wrapped with Lmell rubber, which has good adhesion and protection for the equipment. . Umbrella clip for camera, one end to clamp tripod axis, the other end to clamp umbrella handle .It can be clamped on the tripod center axis or the tripod three legs.Solve the needs of shooting in the rain, add an umbrella to protect your camera from damage.You can add an umbrella to shade the camera under the hot sun. . It can be used on the light stand to increase the light source. The standard 1/4 screw head of the gimbal can be connected to a digital camera as a base.…

UNIVERSAL: The rubber tripod feet spikes replacements fit all tripods and monopods with 1/4 inch thread mounting. ANTI-SLIP: Each tripod spike foot is made of silicone rubber, which has a stronger grip to prevent tripods and monopods slip and provide extra stability even if in uneven terrain. EASY TO INSTALL: It is practical and easy to use. No need to use extra tool, just simply screw it in and then use it on your tripod. MULTIPURPOSE: The tripod feet spike allows the tripod leg to dig deep into soft surfaces,and keep your tripod stable when you're shooting on softer looser ground such as snow, sand, etc. it is also suitable for outdoor and indoor use.

CoreParts MOBX-ACC-007 tripod