Car Jacks

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 12 TonneHydraulic Lift: 150mmMaximum Height: 441mmMinimum Height: 231mmNett Weight: 6.4kgScrew Extension: 60mmTechnical Specification:Capacity: 12 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mmDimensions: Length: 140mm x Height: 240mmWeight: 6.6KgWarranty: 3 years

• Handles and levels heavy, off-centre loads quickly and easily.• Ball-bearing handle allows for a smooth and easy adjustment.• Three adjustment holes accommodate different sized engines.• Ideal for car, van, truck and marine engines.• If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum.• Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links.Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pa…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

• Adjustable outer extension clamps with rubber feet • Designed to position the engine when replacing the engine mounts. Also suitable for aiding the removal of transmission components and gearboxes • Compatible with most cars and light commercial vehicles • Supplied with two chainsThis engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. 2 x ChainsTechnical SpecificationAdjustable screw height: 0-205mm Capacity…

• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds down for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• The support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 400kg. • The support bar is not included. • Model No. PH400Technical Specification:Capaci…

• LARGE CAPACITY - Made for automotive and light commercial fuel tanks up to a capacity of 40 gallons (tank must be emptied before handling).• VERSATILE - Four adjustable support arms can be easily positioned to fit many shapes and sizes.• PROTECTION - Rubber pads protect the tank while being supported.• SAFE - Includes two load restraint straps.Technical SpecificationCapacity: 565kgCompatibility: ADT3, ADT5, ADT7, 500TTJ, 800TTJNett Weight: 25kgTechnical Specification:Capacity: 565kgDimensions: Length: 440mm x Height: 125mmWeight: 23.48KgWarranty: 1 year

The Sealey JKIT01 Lifting Kit features a Jack, Axle Stands, Creeper, Chocks & Wrench The Sealey JKIT01 offers a 5 piece lifting kit for the DIY mechanic consisting of Jack, Axle Stands, Creeper, Chocks & Wrench. Suitable for working on vehicles up to 2 tonne in weight.  Features:  
- Folding wheel chocks (x2) 
- L-bar wrench with 17 & 19mm socket  
- 1 tonne axle stands (x2) have a combined weight capacity of 2 tonne 
- 2 tonne trolley jack with short wheel base has a lifting range of 140mm to 340mm 
- Padded car creeper with 6 castors allows for comfort whilst carrying out under car maintenance  Specification: 
- Model No: JKIT01 
- Jack Specification:
- Weight: 8.7kg  …