Car Jacks

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Scissor action jack suitable for automotive, industrial and agricultural applications. Ideal for vehicles with low ground clearance. 4 Tonne Front scissor nose capacity with minimum height of 65mm allows use under forklifts. 5 Tonne Cylinder cap capacity with minimum height of 416mm suits agricultural and other vehicles with high set jacking points. Features & Benefits: • Scissor action jack suitable for automotive, industrial and agricultural applications. • Ideal for vehicles with low ground clearance. • 4 Tonne Front scissor nose capacity with minimum height of 65mm allows use with forklifts. • 5 Tonne Cylinder cap capacity with minimum height of 416mm suits agricultural and other vehicles…

Expert Quality, long chassis, extra low profile pneumatic jack. The 125mm entry height has a total reach of 2210mm and is capable of lifting 40 Tonnes. The 3 stage adjustable ergonomic handle is fixed with a 'Slow Down' valve and a 'Self-Return' switch for increased safety and easy use. Fitted with industrial quality seals prolonging the life of the jack, a safety overload valve and twin rubber coated wheels for a quieter and smoother operation, whilst also preventing damage to garage floors and improving manoeuvrability. Supplied with 45mm and 75mm height lift extensions and a 1/4" BSP airline connector.Capacity stage 1 40 Tonne (40,000kg)Capacity stage 2 20 Tonne (20,000kg)Capacity stage …

This low profile trolley jack is designed for domestic and light-duty commercial use and enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm. The trolley jack has a twin piston pump for fast lifting and an integrated rubber saddle pad to prevent damage to the underside of the vehicle. It is fitted with rear-swivelling, hard-wearing nylon wheels to give quiet and smooth operation and prevent damage to garage and workshop floors.Contents:1 x Low Profile Trolley Jack, 2 TonneCapacity: 2 TonneSaddle diameter: 100mmHandle length: 1,000mmChassis length: 575mmWeight: 23.5kgMin height: 85mmMax height: 430mmAdditional Information:Capacity: 2 Tonne

Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism). During raising it can be stopped at any height before locking the vehicle level. Once raised it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle). Three adjustable width settings (775mm/1130mm/1530mm) allow narrow chassis cars to be lifted, such as MGs and other small classic cars. Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure. Features & Benefits: …

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 90mm, 3 Tonne

Heavy-duty 10mm gauge steel base design with large jacking pad for greater strength and load stability. Universal joint release mechanism allows safer controlled lowering of the load. Rocket Lift feature brings lifting arm into contact with jacking point with minimal pumps. Polyurethane wheels provide smoother manoeuvrability and help prevent damage to workshop floor. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Foot pedal for quick approach of the lifting saddle to the vehicle in confined spaces. Includes removable rubber saddle pad and built-in magnetic tool tray for fasteners and tools. 3 Year Guarantee - 2nd and 3rd year subject to …

Heavy-duty short axle stands. Sturdy welded steel construction for superior safety and strength. Large crutch for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 244/354mm. • Capacity: 14 Tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • For forklifts and vehicles with low suspension. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS7S Specifications: Model No AS7S Brand: Premier Capacity Each: 7 Tonne Capacity Pair: 14 Tonne Maximum Working Height: 354mm Minimum Working Height: 244mm Nett Weight: 10.56kg

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.