Car Jacks

Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing. Features & Benefits: • 3 Tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LR Specifications: Model No CAR3000LR Brand: Sealey Capacity Pair: 3000kg Nett Weight: 0.00kg Overall Dimensions (L x W x H): 700 x 200 x 80mm Ramp Height: 65mm

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 500kgTest Load: 750kgLift Height: 3mHook Aperture: 28mmHoist Weight: 8.5kg

Rubber Saddle Pad

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. Contents: 2 x Chains Specifications: Capacity: 500kg Min. width: 730mm Max. width: 1,480mm Adjustable screw height: 0-205mm Overall beam length: 1,500mm Chain quantity: 2 Weight: 17kg

Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.

All steel construction with bolted height adjustment. Ideal for long term motorcycle storage. Sold in pairs. Features & Benefits: • All steel construction with bolted height adjustment. • Ideal for long term motorcycle storage. • Sold in pairs. • Model No. SAS01 Specifications: Model No SAS01 Brand: Sealey Nett Weight: 2.04kg Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mm

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 6 metre

Heavy-duty nylon reinforced rubber wheel chock. Manufactured to be comparable the current DVSA requirements. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter Ø1500-1800mm. Suitable for vehicles below 40 Tonne. Features & Benefits: • Heavy-duty nylon reinforced rubber wheel chock. • Manufactured to be comparable the current DVSA requirements. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Features robust carry handle that…