Car Jacks

This large and substantial B-G Racing Quick Lift Jacks is designed to lift Saloon cars such as Rally or Touring cars. Designed to provide a temporary lifting solution (lifting up to 210mm), the jack is simple to operate with a quick and reliable action and is ideal for quick services where simple wheel changes or general checks are to be carried out. A safety locking mechanism is featured and the handle end is coloured bright yellow for visibility. Available in a choice of silver/grey or red colours, both of which are powder coated for long term protection.Dimensions:Length: 1190mmWidth: 370mmClosed Height: 50mmOpen Height: 210mmReach: 980mmHandle Length: 1400mmWeight: 12.5kgLifting capacity: 4…

Spare Parts to suit Kennedy Trolley Jacks

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle. Fitted with carrying handle.

Car scissor jack Lift tool 1 tonne Lift Stand Equipped with a practical rotating saddle including a rubber pad and a sturdy crank with handle Car Lift Jack Made from quality powder-coated steel Q235 Car Van Lifting Tool Comes with storage bag

Origin：Mainland China Certification：NONE Special Features：car rubber jack pad Model Name：car rubber jack pad Material Type：rubber

Constructed from heavy gauge steel for heavy-duty use with a large diameter saddle for a secure hold under the jacking point. Extra long handle for easy access under bigger vehicles which also tilts and locks in three positions with a built-in handle mounted safety release to prevent accidental lowering of the load. A foot pedal pump and fine adjustment are fitted on the handle for optimum vehicle height. Automatic safety overload protection and rear toe plate for easy positioning.

Rubber support universal for trestles with a support width of 29.5 mm Suitable for the trestle saddle, easy to mount High quality rubber Suitable for article 347470 HEYNER Stand Jack 6 Ton. Stand Jack isn't included!!! Brand: HEYNER Germany

Spacious - with total dimensions of 60 x 90 x 202 cm. Two shelves. A storage grille and pull-out storage rails with tension straps Load capacity - supports a total load up to 220 kg Mobile – thanks to four PU steering wheels with two brakes and modular construction Efficient - creates more order and saves paths in any body workshop

VEVOR Pneumatic Air Jack 3 Ton Triple Bag 6600 lbs Air Pneumatic Jack 43LB 6600 lbs Pneumatic Car Jack 3 Lift Bag Garage Mechanic Van Pro6600lbs Loading Capacity5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: White,Model: Triple Bag Air Jack,Material: Steel Rubber,Working Temp: -60℃~ 50℃

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

Designed for lower clearance vehicles, as well as a Turbo-Lift lifting system. Fitted with a chromed main ram and heat-treated chromed pistons. Features Ultra-low profile design for low vehicles 'Turbo-Lift' system raises contact saddle to the vehicle surface in one swift motion Rubber grip and PU contact saddle pad PU wheels reduces noise and damage Heat-treated chromed pistons and ram

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting.Features & Benefits:• Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle.• High quality rubber, providing a sturdy and durable point of contact.• Secure fit to vehicle, moulded to fit bespoke vehicle fitting.• Model No. JP24Specifications:Model No JP24Application(s): Mercedes-Benz, W213/S213/C238/A238 (2016 on), GLK-Class X204 (2008 - 2015), GLE, GLS C167/V167/X167 (2018-on), C…

0.2 kg