Car Jacks

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing. Features & Benefits: • 3 Tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LR Specifications: Model No CAR3000LR Brand: Sealey Capacity Pair: 3000kg Nett Weight: 0.00kg Overall Dimensions (L x W x H): 700 x 200 x 80mm Ramp Height: 65mm

Manufactured from durable polypropylene. Features & Benefits: • 3 Tonne Capacity per pair. • Manufactured from durable polypropylene. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000C Specifications: Model No CAR3000C Brand: Sealey Capacity Pair: 3000kg Maximum Tyre Width: 260mm Nett Weight: 0.00kg Overall Dimensions (L x W x H): 900 x 300 x 215mm Ramp Height: 160mm

Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000. Features & Benefits: • Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each/800kg per Pair. • Model No. CAR2001 Specifications: Model No CAR2001 Brand: Sealey Capacity Each: 400kg Capacity Pair: 800kg Length: 630mm Maximum Width: 195mm Nett Weight: 6.16kg

Manufactured from 3.5mm steel section. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved. Features & Benefits: • 2 Tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000 Specifications: Model No CAR2000 Brand: Sealey Capacity Pair: 2000kg Maximum Tyre Width: 200mm Nett Weight: 14.35kg Overall Dimensions (L x W x H): 800 x 345 x 250mm Ramp Height: 190mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 222/447mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ8S Specifications: Model No PBJ8S Brand: Viking Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mm Minimum Height: 222mm Nett Weight: 5.00kg Screw Extension: 80mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 207/402mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ5S Specifications: Model No PBJ5S Brand: Viking Capacity: 5tonne Hydraulic Lift: 125mm Maximum Height: 402mm Minimum Height: 207mm Nett Weight: 3.95kg Screw Extension: 70mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 168/316mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ2S Specifications: Model No PBJ2S Brand: Viking Capacity: 2 Tonne Hydraulic Lift: 100mm Maximum Height: 316mm Minimum Height: 168mm Nett Weight: 2.2kg Screw Extension: 48mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 243/453mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ20S Specifications: Model No PBJ20S Brand: Viking Capacity: 20 Tonne Hydraulic Lift: 150mm Maximum Height: 453mm Minimum Height: 243mm Nett Weight: 9kg Screw Extension: 60mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 231/441mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ15S Specifications: Model No PBJ15S Brand: Viking Capacity: 15 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mm Nett Weight: 7.15kg Screw Extension: 60mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 231/441mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ12S Specifications: Model No PBJ12S Brand: Viking Capacity: 12 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mm Nett Weight: 6.4kg Screw Extension: 60mm

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 231/461mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ10S Specifications: Model No PBJ10S Brand: Viking Capacity: 10 Tonne Hydraulic Lift: 150mm Maximum Height: 461mm Minimum Height: 231mm Nett Weight: 5.9kg Screw Extension: 80mm

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Features & Benefits: • Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. • Low profile afforded by integral pivot/lifting point. • Model No. BC3000 Specifications: Model No BC3000 Adjustable Beam Width: 80-320mm Brand: Sealey Capacity: 3000kg Dimensions: (A) - 35…

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Features & Benefits: • Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. • Low profile afforded by integral pivot/lifting point. • Model No. BC2000 Specifications: Model No BC2000 Adjustable Beam Width: 75-220mm Brand: Sealey Capacity: 2000kg Dimensions: (A) - 26…

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release mechanism allows safer, more controlled lowering of jack. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Profiled lifting arm gives low clearance height of just 88mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. Fitted with an overload valve for added safety. Hydraulic oil by-pass system protects ram from being overextended. Features & Benefits: • Min./Max. Saddle Height: 88/495mm. • Chassis Length: 701mm. • Twin piston Rocket Lift feature brings saddle to maximum height in minima…

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Fitted with innovative 180° turning handle to allow you to jack the car up even in tight spaces. Profiled lifting arm allows low clearance height of just 100mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Features & Benefits: • Min./Max. Saddle Height: 100/350mm, allowing low entry. • Chassis Length: 490mm. • Heavy-duty chassis with strengthening flanges along the top edge fo…

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEHV - Trolley Jack 2 Tonne Low Profile Short Chassis - Hi-Vis Green AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) AS2000F - Axle Stands (Pair) 2 Tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive Features & Benefits: • Package includes: • Model No. - Description • 1020LEHV - 2 Tonne Low Profile Short Chassis Trolley Jack - Hi-Vis Green • AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) • AS2000F - Folding Axle Stands (Pair) 2 Tonne Capacity per Stand • WCF01 - Folding Wheel Chocks - Pair • S04…

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Features & Benefits: • Min./Max. Saddle Height: 85/385mm, allowing low entry. • Chassis Length: 563mm. • Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. • Profiled lifting arm allows low clearance height of just …

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Features & Benefits: • Min./Max. Saddle Height: 85/385mm, allowing low entry. • Chassis Length: 563mm. • Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. • Profiled lifting arm allows low clearance height of just …