Car Jacks

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

VEVOR Dirt Bike Lift Stand, Motorcycle Jack Lift Stand 440 lbs Capacity and Hydraulic Lift Operation, Adjustable Height Hoist Table, for Dirt Pit Bike Repair, Maintenance, Dirt Bike Accessories440 LBS Loading CapacityEffortlessly OperationNon-slip DesignBuilt to LastLock the Height in PlaceRepair AnywhereHeight Range: 10 inch-18 inch/255 mm-460 mm,Item Model Number: TD-059,Adjustable Height of Deck：0-4.7 inch/0-120 mm:,Max. Capacity: 440 lbs/0.2 tons,Net Weight: 14.3 lbs/6.5 kg,Product Size: 12.4×11.8×12.4 inch/315×300×315 mm

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Condition: New Item Length: 6.5m Type: Mechanical Jack Country/Region of Manufacture: China Item Height: 3.5cm Item Weight: 80g Item Width: 6.5cm Material: Rubber Special Features: Jack Pad Package Include:1pc

This large and substantial B-G Racing Quick Lift Jacks is designed to lift Saloon cars such as Rally or Touring cars. Designed to provide a temporary lifting solution (lifting up to 210mm), the jack is simple to operate with a quick and reliable action and is ideal for quick services where simple wheel changes or general checks are to be carried out. A safety locking mechanism is featured and the handle end is coloured bright yellow for visibility. Available in a choice of silver/grey or red colours, both of which are powder coated for long term protection.Dimensions:Length: 1190mmWidth: 370mmClosed Height: 50mmOpen Height: 210mmReach: 980mmHandle Length: 1400mmWeight: 12.5kgLifting capacity: 4…

Spare Parts to suit Kennedy Trolley Jacks

Maximum Pressure - 30 T / 30.000 Kg Workbench Width - 460 Mm Piston Stroke 160Mm Operating Pressure (Under Full Load) - 666 Bar / 9.656 Psi

This Clarke heavy duty trolley jack features an extra-long reach 1.3 metre chassis and large 124mm saddle. This trolley jack also benefits from a control rod on the handle which allows it to be locked in 3 positions.

High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead mans control. Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.2 Tonne High Lift Low Profile Trolley Jack• Min./Max. Saddle Height: 80/805mm allowing low entry.• High lift jack arm with incredibly low minimum access height of just 80mm.• Fitted with quick lift foot pedal and dead mans control.• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points.• Fitted

Chassis Stand / Max Load 6 t / 5.8 kg / Lifting Positions 10

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

L shaped Metal Adapter Bracket For Hydraulic Jack | Dedicsated open end L shape adapter for lifting caravans,motorhomes, camping vehicles Double Edge Adapter for Hydraulic Jacks Inner Diameter: 20/27 mm | Contact Area: 45 x 53 mm Lift Jack Adapter Made of high quality steel, will not damage the vehicle. The adapater fits most of the bottle jacks but please check the dimensions before buying/ This is a high-quality HEYNER product

The WINNTEC® from SIP 5 TON Long Chassis Jack is perfect for extreme lifting of trucks and heavy machinery, offering high-reach performance from a low-profile design and exceptionally safety usage via automatic overload and universal joint release valves. Designed for all automotive garages and workshops. KEY FEATURES 150mm to 680mm lifting height range Low-profile design for lower ground clearances Foot-operated pump for effortless efficiency Heavy-duty steel wheels offer easy movement Handle with integrated load control knob WINNTEC® from SIP 3-Year Warranty

Info Governance Engine Up To 250 Devices

The Winntec From Sip 2 Ton Low-Profile Trolley Jack Is Perfect For Low Clearance Vehicles And Utilises A Unique Turbo-Lift System That Quickly Raises The Saddle To The Lift Point In One Swift Motion. • 2 Ton Maximum Weight Capacity • 75Mm To 510Mm Lifting Height Range • Low-Profile Design For Lower Clearance Vehicles • Turbo-Lift System Raises The Jack Contact Saddle To The Vehicle Lifting Surface In One Swift Motion • Heavy-Duty Pu Wheels Reduce Noise And Damage • Chrome-Plated Main Ram And Heat-Treated Dual Pump Pistons For Added Durability And Longer Life • Comfortable Rubber Grip With Extra Long Handle • Integrated Universal Joint Release Mechanism • Suitable For Cars