Car Jacks

Heavy-duty steel plate with rust resistant finish. Fitted with four Ø75mm metal castors, two lockable. Each dolly features a side handle for easy carrying. Can handle up to 250mm widths. Suitable for use in bodyshops and workshops. Features & Benefits: • Can handle up to 250mm widths. • Fitted with four Ø75mm metal castors, two lockable. • Heavy-duty steel plate with rust resistant finish. • Each dolly features a side handle for easy carrying. • Suitable for use in bodyshops and workshops. • Model No. WS681

Fully certified and approved to comply with MOT requirements. Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets MOT recommendation for lifting on jacking point. Features & Benefits: • Fully certified and approved to comply with MOT requirements. • 1.6m Load arm reach. • Beam Lift: 95-300mm. • 2-Stage mechanical safety lock and…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 1m x 90mm, 3 Tonne

The Sealey MES03 Engine Rebuild Stand for supporting large multi-cylinder engines The Sealey MES03 is a Multi-Cylinder Engine Rebuild Stand, suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Both the width and length are adjustable. The engine stand's frame elongates to allow adjustment for length between mounting points. Features:   
- Width and length adjustable
- The supports can rotate for accessibility to all parts of the engine
- Suitable for supporting large multi-cylinder engines (maximum weight 100kg)
- Engine stand's frame elongates to allow adjustment for length between mounting poi…

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Fitted with carrying handle. Features & Benefits: • Min./Max. Height: 280/450mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Fitted with carrying handle. • Model No. SJ50 Specifications: Model No SJ50 Brand: Sealey Capacity: 50 Tonne Hydraulic Lift: 170mm Maximum Height: 450mm Minimum Height: 280mm Nett Weight: 25.8kg Screw Extension: n/a

Chamfered base design for compact light-duty trolley jacks. Designed to avert damage to the sill and underside of a vehicle when in use. Made from durable and robust rubber. The slotted rubber feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with trolley jacks with 38-55mm diameter saddles.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 2 metre

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size Ø104mm. Fits saddle Ø98-105mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 8.2mm. • Size: Ø104mm. • Fits saddle Ø98-105mm. • Model No. JP15 Specifications: Model No JP15 Brand: Sealey Nett Weight: 0.074kg Jack Pad Size: Ø104mm Style: Type B Profile Depth: 8.2mm To Fit Saddle Size: Ø98-105mm Weight: 0.074kg

QLT450 2.5 tonne capacity. Made of a lightweight aluminium and steel construction. Its low profile makes it ideal for any type of car, including sports and race cars, and its swivel castor wheels enable easier positioning under vehicles. It also has a quick lift with dual pump and a rubber hand grip for user comfort. Dimensions 685 x 345 x 180mm.

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 3000kgTest Load: 4500kgLift Height: 3mHook Aperture: 46mmHoist Weight: 25kg