Car Jacks

Expert Quality, long chassis, extra low profile pneumatic jack. The 125mm entry height has a total reach of 2210mm and is capable of lifting 40 Tonnes. The 3 stage adjustable ergonomic handle is fixed more→with a 'Slow Down' valve and a 'Self-Return' switch for increased safety and easy use. Fitted with industrial quality seals prolonging the life of the jack, a safety overload valve and twin rubber coated wheels for a quieter and smoother operation, whilst also preventing damage to garage floors and improving manoeuvrability. Supplied with 45mm and 75mm height lift extensions and a 1/4" BSP airline connector.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. T more→ype B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Op more→tional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one e more→nd (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• MOT COMPLIANT - Fully certified and approved to comply with MOT requirements.• SAFETY LOCK - Three stage mechanical safety lock prevents accidental injury.• WIDE REACH - Meets MOT recommendation for more→lifting on jacking point.• ROLLER WHEELS - Allows easy movement up and down the lift or inspection pit.• 2 YEAR GUARANTEE*.Technical SpecificationAir Pressure: 109-174psiBeam Lift: 270mmCapacity: 3000kgLoad Arm Reach: 675-1510mmNett Weight: 159kgOptional Accessories: N/ACompatible Lifting & Support Accessories: SJBEX.A01, SJBEX.A02, SJBEX.A03, SJBEX.A05, SJBEX.A06, SJBEX.A07Support Arm Reach: 905-1310mmTechnical Specification:Capacity: 3000kgDimensions: Length: 520mm x Height: 310mmWeight: 174KgWarra…

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes a more→nd transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms. This model has the additional advantage of a 360 adjustable rotating cross beam to enable a greater range of support options when in use.

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and more→as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• This engine stand accepts a wide variety of engines and transmissions.• The Geared Handle Drive allows for easy and accurate 360º rotation in order to access all parts of the engine. • Mounting head more→has four fully adjustable arms with bolt holes to accommodate various load sizes.• Fitted with screw lock to ensure load is secured.• Swivel castors provide excellent manoeuvrability.• Assembled with clevis pins and clips so the stand can be folded for storage.• Maximum Load Length: 700mm.This engine stand accepts a wide variety of engines and transmissions. The Geared Handle Drive allows for easy and accurate 360º rotation in order to access all parts of the engine. Mounting head has four fully a…