Car Jacks

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size ø136.5mm. Fits saddle ø136.5mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 12mm. • Size: ø136.5mm. • Fits saddle ø136.5mm. • Model No. JP08Technical Specification:Nett Weight: 0.23kgJack Pad Size: ø136.5mmStyle: Type BProfile Depth: 12mmTo Fit Saddle Size: ø136.5mmWeight: 0.23kgDimensions: Length: 20mm x Height: 280mmWeight: 0.246KgWarranty: Consumable

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

• Replacement hydraulic ram for SC10LR.V2 engine crane.Replacement hydraulic ram for SC10LR.V2 engine crane.• Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23Technical Specification:Nett Weight: 13kgRam Capacity: 7257kgRam Diameter: 33.93mmRam Travel: 495mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.7mmMounting Point Distance (Min): 620mmOverall Length (Min): 655mmBase Mount Type: Double ClevisWeight: 13.003KgWarranty: Consumable

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody. Slot in the support block allows the car to be lifted by the sill. Manufactured from zinc plated steel and rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 2 & 3 Tonne Jacking Beams. Used in conjunction with Model No's SJBEX.A06 or SJBEX.A07 Jacking Beam Extensions.Features & Benefits:• Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from zinc plated steel and rubber, providing a sturdy and durable point …

• Two welded steel wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees.• Suitable for heavy goods vehicles.Two welded steel wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. Suitable for heavy goods vehicles.• Two welded steel wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for heavy goods vehicles. • Model No. WC05Technical Specification:Dimensions (W x D x H): 200 x 270 x 210mmMaterial: SteelNett Weight: 8.11kgWeight Each: 4kgDimensions: Length: 266mm …

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Sold loose.