United Kingdom

Car Jacks

 prices on 1092 models  
Show
• Suitable for supporting large multi-cylinder engines (maximum weight 100kg).• The supports can rotate for accessibility to all parts of the engine.• Width and length adjustable.• Engine stand's frame elongates to allow adjustment for length between mounting points.Suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Width and length adjustable. Engine stand's frame elongates to allow adjustment for length between mounting points.• Suitable for supporting large multi-cylinder engines (maximum weight 100kg). • The supports can rotate for accessibility to all parts of the engine. • Width and length adj…
from £171.98 up to £289.58 
Compare prices and buy Sealey Engine Rebuild Stand - Multi-Cylinder 100kg
£172.00
£180.00
£180.00
£230.00
£264.00
Compare prices6
High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …
£59.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable
from £112.95 up to £132.94 
Compare prices and buy Sealey Hydraulic Ram for SC10.V3
£113.00
£120.00
£133.00
Compare prices3
This low entry trolley jack is ideal for vehicles with a reduced clearance height. Heavy-duty chassis with a powerful twin piston pump for a fast lift capable of reaching a maximum height of 500mm. The knurled handle enhances grip to prevent slippage. The EVA foam handle cover and the integrated rubbler saddle pad help prevent damage to the vehicle. There is a safety valve to prevent the jack from overloading. Supplied with a two-piece handle.PTDDRPDIR31481
£179.78
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO/5LTechnical Specification:Nett Weight: 16.91kgPack Qty: 4Size: 5LDimensions: Length: 280mm x Height: 298mmWeight: 16.906KgWarranty: Consumable
from £150.95 up to £214.65 
Compare prices and buy Sealey Hydraulic Jack Oil 5L - Pack of 4
£151.00
£151.00
£199.00
£200.00
£215.00
Compare prices5
GREY machine jack, max. load 7 t, 4+ items. Supplied = assembled. Max. load = 7 t. Lifting range with lifting head = 65 - 420 mm. Lift = 355 mm. Weight = 53 kg. Product type = hydraulic jacks. Sturdy steel construction for a variety of applications. Hydraulic system is protected by overload pressure valve. Finely controlled discharge valve for precise lowering. The hydraulic GREY machine jack is made of high quality steel and extremely robust. It has a max. load of 4 or 7 tonnes, can lift vehicles and machinery without difficulty and is therefore highly versatile. Its compact design provides stability and, together with the long pump lever, needs little effort to operate.
£646.80
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEHV - Trolley Jack 2 Tonne Low Profile Short Chassis - Hi-Vis Green AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) AS2000F - Axle Stands (Pair) 2 Tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive Features & Benefits: • Package includes: • Model No. - Description • 1020LEHV - 2 Tonne Low Profile Short Chassis Trolley Jack - Hi-Vis Green • AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) • AS2000F - Folding Axle Stands (Pair) 2 Tonne Capacity per Stand • WCF01 - Folding Wheel Chocks - Pair • S04…
from £160.95
Compare prices and buy Sealey 1020LE Low Entry Yankee Trolley Jack Kit 2 Tonne Green 1020LEHVBAGC
£161.00
£161.00
Compare prices2
HI JACK HEAVY DUTY BASE ASSEMBLY
£109.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The WINNTEC® from SIP 12 TON Trolley Jack Stands offer mobility and heavy-duty load support, utilising a heavy-duty pin support column, for safe and simple adjustment, and a manoeuvrable design with wheels for easy positioning in all applications. Suitable for professional garages and workshops. KEY FEATURES 302mm to 450mm lifting height range Pin-type support column with wide base to spread weight Mobile design with wheels for easy stand positioning Supplied as a pair of stands for extra support WINNTEC® from SIP 3-Year Warranty
£229.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle.
from £20.95 up to £25.99 
Compare prices and buy Sealey Jacking Pad Set Tesla - JPT4
£21.00
£26.00
Compare prices2
Patch cable cat 5e Up to 5m
£4.29
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Heavy-duty 7 Tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even …
from £734.95 up to £890.10 
Compare prices and buy Sealey High Level Commercial Vehicle Support Stand 7 Tonne
£735.00
£735.00
£788.00
£800.00
£890.00
Compare prices5
VEVOR Hydraulic Long Ram Jack, 8 Tons/17363 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker with Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red8-Ton/17636 lbs Load Capacity26 "-45.7" Lifting RangeHydraulic Steel CylinderSingle Piston Pump & Clevis BaseHigh-grade Steel StructureResidential and Commercial UseStoke: 19.7 in/50 cm,Pinhole Diameter: 0.7 in/1.7 cm,Product Diameter: 3.1 in/8 cm,Piston Rod Diameter: 1.2 in/3 cm,Lifting Capacity: 8 Tons/17363 lbs,Model: VV-CGQJD-HODJ-8T,Min. Lift Height: 26 in/66 cm,Max. Lift Height: 45.7 in/116 cm,Power: Hydraulic,Weight: 20.5 lb/9.3 kg
£30.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop.• Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Fitted with four ø150mm nylon castors.• Max. Width: 1485mm.• Min./Max. Height: 300/390mm.Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. • Sliding castor brackets adjust for width and rubb…
from £224.95 up to £294.18 
Compare prices and buy Sealey Transportacar Trolley Economy Model 2tonne Capacity
£225.00
£225.00
£272.00
£294.00
Compare prices4
Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied in a tough storage case and suitable for recovery trucks. The case prevents the jack from damaging other items and also prevents the spread of grease oil or dirt.2 Tonne Bottle Jack with Storage Case• Min./Max. Height: 175/339mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• Tough storage case.• Model No. SJ2BMCModel No: SJ2BMC:Brand: Sealey:Capacity: 2 Tonne:Hydraulic Lift: 116mm:Maximum Height: 339mm:Minimum Height: 175mm:Nett Weight: 3.00kg:Screw Extension: 48mm:PTDSEASJ2BMC
£30.06
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.
£73.67
Electricalworld.com
Delivery: in United Kingdom
Report
Buy!
Electricalworld.com
Fine rolled thread and precision made thrust bearing for long life and smooth operation.
£31.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Car Scissor Lift Jack For BMW 2 Series, X1 Series, Mini Cooper | OEM Lift Jack Wind Up Tool OEM Scissor Jack FIts BMW 2 Series F45 Active Tourer and F46 Grand Tourer 2014 - 2021 OEM Scissor Jack FIts BMW X1 Series F48 2015 - 2022 OEM Scissor Jack FIts Mini Countryman F60 2016 - 2023 Clubman F54 2015 - 2023 Min. lifting height: 100mm | Max. lifting height : 390mm Heavy Duty Car Jack Lift | The jack stand is made from quality steel Brand: HEYNER Made in EU
£119.49
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 4 metre
from £21.95
Compare prices and buy Sirius Duplex Lifting Strap Reinforced Sling 4m 2000kg LS100-0204
£22.00
£22.00
Compare prices2
Chain, long, without bolt, for machine jacks. Supplied = assembled. Category = lifting equipment. Product type = mounting materials. Material = metal.
£17.29
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle ø100-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 27mm. • Size: 118.5mm Square. • Fits saddle ø100-106mm. • Model No. JP01Technical Specification:Nett Weight: 0.18kgJack Pad Size: 118.5mm (Square)Style: Type AProfile Depth: 27mmTo Fit Saddle Size: ø100-106mmWeight: 0.18kgDimensions: Length: 30mm x Height: 190mmWeight: 0.196KgWarranty: Consumable
from £8.28 up to £9.29 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type A V4
£8.00
£9.00
£9.00
Compare prices3
Note: Image is for illustrative purposes only and may differ from the actual product
£339.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• A fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for use with Model No's. 500TTJ and 800TTJ.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's. 500TTJ and 800TTJ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's. 1000ETJ, 1000TR, 1000TRQ, 1500TR. • Model No. ADT5Technical Specification:Capacity: 1000kgCompatibility: 500TTJ and 800TTJ.Nett Weight: 23.69kgDimensions: Length: 315mm x Height: 350mmWeight: 24.6KgWarranty: 1 year
from £272.95 up to £314.54 
Compare prices and buy Sealey Adjustable Gearbox Support 1000kg Capacity for 500TTJ and 800TTJ
£273.00
£273.00
£293.00
£315.00
Compare prices4
Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height. Fitted with safety overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.12 Tonne Bottle Jack with Telescopic Ram• Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height.• Fitted with safety overload valve.• Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• 3 Year guarantee*.• Model No. PTBJ12SModel No: PTBJ12S:Brand:
£150.48
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height