Car Jacks

#N/APTDSEAYAJ18S

Qualitative Materials：Constructed of heavy-duty steel, the meticulously crafted oil cylinder can reduce seal ring wear and improve service life. High wear resistance, high strength Professional Design: Flex head features a permanently molded rubber pad, interlocked to prevent separation. The oil that anti freezing in winter and high temperature resistant in summer, is suitable for a wider range of regions Safety Protection: The pump has an automatic overload system that if overloaded, it will automatically start to prevent damage to rams and equipment Sturdy Blow-Molded Carrying Case：Equipped with a blow molded suitcase, all components can be stored in a planned manner. It can also be

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

3 tonne capacity. One stroke instant lift foot pedal, raises the saddle up to jack point to increase productivity. Features and Benefits Constructed from heavy gauge steel 1m, two-piece handle 120mm diameter saddle Automatic safety overload protection Positive twist, lock and release mechanism Heavy duty rear swivelling castor wheels. Notes Maximum load: 3000kg. Minimum height: 145mm. Maximum height: 490mm.

European style trolley jack manufactured to exacting standards. Lift-and-twist 'Dead Man' mechanism operates via 'D' shaped handle and prevents accidental lowering; lowers rapidly without load and provides smooth, slow, controlled lowering with load. Nylon wheels fitted for quiet operation and prevention of damage to garage floors. Foot pedal for quick lifting of saddle to the vehicle jacking point. Includes removable rubber saddle pad and built-in tool tray for fasteners and tools.

Furniture mover, hydraulic, max. load 2800 kg, polyurethane. Supplied = assembled. Lift = 182 mm. Max. load = 2800 kg. Frame material = steel. Frame colour = melon yellow RAL 1028. Width = 650 mm. Height = 1000 mm. Wheel diameter = 200 mm. Wheel type = polyurethane. Finish = powder coated. Footplate width = 650 mm. Footplate depth = 60 mm. Lifting range = 5 - 182 mm. Product type = furniture transport units. Application = diverse. Easy lifting and precise lowering of the load. Robust welded construction. Fully assembled and ready for immediate use. This furniture mover is specifically suited for transporting large-volume and heavy loads, such as tools and machinery cabinets, safes, crates, machines,…

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

This fast lifting jack is built for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors.

Cylinder Floor Stand H600xW340xD310mm designed to store cylinders up to a maximum 280mm. Two hinged bars to secure cylinders using wing nuts. Heavy duty floor fixable base plate. Floor fixings not supplied. Epoxy powder coated blue finish. RAL5019

Scan Engine Mini 1d 3.3 V Decoded Class 2 Note: Image is for illustrative purposes only and may differ from the actual product

Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.4 Tonne Telescopic Bottle Jack• Fitted with overload valve. • Dual-stage rams allow for longer travel.• Stage 1 capacity 7500kg.• Stage 2 capacity 4000kg.• Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• Model No. SJT4Model No: SJT4:Brand: Sealey:Capacity: 4 Tonne:Hydraulic Lift: 170mm:Maximum Height: 390mm:Minimum Height: 160mm:Nett Weight:

Trolley Jack / Max Load 2 t

The WINNTEC® from SIP 5 TON Long Chassis Jack is perfect for extreme lifting of trucks and heavy machinery, offering high-reach performance from a low-profile design and exceptionally safety usage via automatic overload and universal joint release valves. Designed for all automotive garages and workshops. KEY FEATURES 150mm to 680mm lifting height range Low-profile design for lower ground clearances Foot-operated pump for effortless efficiency Heavy-duty steel wheels offer easy movement Handle with integrated load control knob WINNTEC® from SIP 3-Year Warranty

Bottle jack, with hydraulic unit, max. load 2 t, 2+ items. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Overall height from - to = 158 - 298 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle